Vinyl fence cost in Tampa, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,600
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #209
- 1 = most expensive
Local price for a vinyl fence in the Tampa area: $4,300 to $8,600 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Building materials run about 5% below the US average here (BEA goods price index 95.5).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Tampa, FL, standard level
$5,600 to $7,300
About $37 to $48 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,450 | $5,600 |
| Labor | $1,050 | $1,600 |
| Permits and fees | $75 | $120 |
| Total | $5,600 | $7,300 |
Cost breakdown for 150 linear ft in Tampa, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,000 | $6,450 | 78% |
| Labor | $670 | $1,350 | $2,000 | 21% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,300 | $6,450 | $8,600 | 100% |
What is behind the Tampa number
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Tampa wages are 0.89 times the national level. Labor makes up about 21% of the midpoint estimate (22% at national prices).
Materials are scaled with BEA's regional price parity for goods. Tampa is at 95.5 against 100 for the US, so a materials line of $5,250 nationally becomes $5,000 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.9: $40 to $150.
How Tampa compares
Same job, same size (150 linear ft), priced for the nearest metros. North Port is the priciest of the group at $6,500. Ocala is the cheapest at $6,350.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tampa, FLthis page | $4,300 – $8,600 | $6,450 | |
| Lakeland, FL50 miles | $4,250 – $8,450 | $6,350 | −2% |
| North Port, FL55 miles | $4,350 – $8,700 | $6,500 | +1% |
| Orlando, FL75 miles | $4,300 – $8,550 | $6,400 | −1% |
| Ocala, FL80 miles | $4,250 – $8,400 | $6,350 | −2% |
| Punta Gorda, FL90 miles | $4,300 – $8,650 | $6,450 | level |
| Florida (statewide) | $4,400 – $8,750 | $6,550 | +2% |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Out of the 300 metros we cover, Tampa ranks #209 for the cost of this job (#1 is the most expensive). Statewide, Tampa is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $4,600 – $9,200 | $6,900 | +7% |
| Orlando, FL | 1,411,730 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Jacksonville, FL | 765,930 jobs | $4,300 – $8,600 | $6,450 | level |
| North Port, FL | 339,940 jobs | $4,350 – $8,700 | $6,500 | +1% |
| Cape Coral, FL | 304,790 jobs | $4,300 – $8,600 | $6,450 | level |
| Lakeland, FL | 265,280 jobs | $4,250 – $8,450 | $6,350 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Tampa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| San Diego, CA | 1,538,060 jobs | $5,000 – $10,200 | $7,600 | +18% |
| Orlando, FL | 1,411,730 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Denver, CO | 1,609,350 jobs | $4,600 – $9,350 | $7,000 | +8% |
| Charlotte, NC | 1,358,370 jobs | $4,350 – $8,700 | $6,500 | +1% |
Vinyl fence: what moves the price in Tampa
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Related projects, priced for Tampa
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Tampa wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−7%) and chain-link fence lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,850 | −7% |
The best months for vinyl fence in Tampa
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Tampa Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Tampa are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Tampa gets about 49 inches of precipitation in a normal year. The wettest months are June, July and August (9.0 inches in August). Inside the workable window, October and November are the driest, at 2.3 and 1.4 inches. The station averages about 94 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 71 | 53 | 2.6 | Workable |
| Feb | 74 | 56 | 2.6 | Workable |
| Mar | 78 | 59 | 2.5 | Workable |
| Apr | 83 | 65 | 2.5 | Workable |
| May | 88 | 71 | 2.6 | Workable |
| Jun | 91 | 75 | 7.4 | Hot |
| Jul | 91 | 77 | 7.8 | Hot |
| Aug | 91 | 77 | 9.0 | Hot |
| Sep | 90 | 75 | 6.1 | Hot |
| Oct | 86 | 69 | 2.3 | Workable |
| Nov | 79 | 61 | 1.4 | Workable |
| Dec | 74 | 56 | 2.6 | Workable |
Add-ons priced for Tampa
Add-ons start from national price ranges and are scaled by 0.92 for Tampa, which is the average of the area's wage index (0.89) and goods price index (0.95). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,750 |
Who does the work: Tampa trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tampa the blend is 0.89.
Carpenters (47-2031), 50% of the weighting: a median of $25.06 an hour, 14% below the US median of $29.12. The middle half of them earn between $22.58 and $29.31 an hour. About 6,010 work in the metro. That is 41.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 50%) the local median is $21.04 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.87 and $22.81 an hour. BLS counts 12,860 of them working in the area, 88.9 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $110 to the midpoint estimate; the 25th percentile takes off about $65. That is a swing of roughly 1.0% to 1.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tampa-St. Petersburg-Clearwater has 1,447,120 jobs in total (BLS, May 2025), ranking 19th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $22.58 | $25.06 | $29.31 | $29.12 | 0.86 | metro |
| Construction laborers (47-2061) | 50% | $17.87 | $21.04 | $22.81 | $22.66 | 0.93 | metro |
| Blended | 100% | 0.89 | |||||
Tampa: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Tampa. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,600 to $7,300
6-ft privacy fence, standard white
Premium
$6,900 to $8,600
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,050 | $3,750 – $4,900 | $4,600 – $5,800 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,600 – $7,300 | $6,900 – $8,600 |
| 200 ft (200 linear ft) | $5,700 – $8,000 | $7,400 – $9,700 | $9,150 – $11,400 |
| full lot (300 linear ft) | $8,550 – $12,000 | $11,100 – $14,500 | $13,700 – $17,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,300 for Tampa, FL is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Tampa, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Tampa: your questions
+How much does it cost to install a vinyl fence in Tampa?
For 150 linear ft, expect $4,300 to $8,600 in the Tampa area. A standard-spec job lands at $5,600 to $7,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Tampa?
About $28.50 to $56.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Tampa or Lakeland?
Lakeland is 50 miles away. The midpoint for 150 linear ft there is $6,350, which is 2% less than Tampa ($6,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tampa?
About 21% at the midpoint, or $1,350 out of $6,450. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Tampa?
$5,700 to $11,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Tampa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Tampa area (our national range of $40 to $150 scaled by the local price level).
+Is Tampa expensive for vinyl fence compared with the rest of Florida?
Tampa is 2% below the Florida statewide estimate ($6,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Tampa?
The BLS median is $25.06 an hour in the Tampa area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.58 to $29.31.
+What do basic and premium vinyl fence work cost in Tampa?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,900 to $8,600. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Tampa?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Tampa?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Tampa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.