Vinyl fence cost in Cape Coral, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,600
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #211
- 1 = most expensive
A vinyl fence in Cape Coral, FL usually costs $4,300 to $8,600 for 150 linear ft. That works out to about $28.50 to $56.50 per linear ft before permits. Compared with the national midpoint that is $400 less. Carpenters earn a median of $23.66 an hour in the Cape Coral area, 19% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Cape Coral, FL, standard level
$5,600 to $7,300
About $37 to $48 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,050 | $1,550 |
| Permits and fees | $75 | $120 |
| Total | $5,600 | $7,300 |
Cost breakdown for 150 linear ft in Cape Coral, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 78% |
| Labor | $650 | $1,300 | $1,950 | 20% |
| Permits and fees | $40 | $95 | $150 | 2% |
| Total | $4,300 | $6,450 | $8,600 | 100% |
Where the Cape Coral price comes from
Labor is 20% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Cape Coral the blended ratio comes out at 0.87.
Materials are scaled with BEA's regional price parity for goods. Cape Coral is at 96.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 102.3: $40 to $150.
Is Cape Coral cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,350 to $6,900 across Cape Coral and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Cape Coral, FLthis page | $4,300 – $8,600 | $6,450 | |
| Punta Gorda, FL25 miles | $4,300 – $8,650 | $6,450 | level |
| Naples, FL45 miles | $4,300 – $8,650 | $6,500 | +1% |
| North Port, FL60 miles | $4,350 – $8,700 | $6,500 | +1% |
| Lakeland, FL100 miles | $4,250 – $8,450 | $6,350 | −2% |
| Miami, FL100 miles | $4,600 – $9,200 | $6,900 | +7% |
| Florida (statewide) | $4,400 – $8,750 | $6,550 | +2% |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Out of the 300 metros we cover, Cape Coral ranks #211 for the cost of this job (#1 is the most expensive). Statewide, Cape Coral is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $4,600 – $9,200 | $6,900 | +7% |
| Tampa, FL | 1,447,120 jobs | $4,300 – $8,600 | $6,450 | level |
| Orlando, FL | 1,411,730 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Jacksonville, FL | 765,930 jobs | $4,300 – $8,600 | $6,450 | level |
| North Port, FL | 339,940 jobs | $4,350 – $8,700 | $6,500 | +1% |
| Lakeland, FL | 265,280 jobs | $4,250 – $8,450 | $6,350 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Cape Coral against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Wichita, KS | 308,570 jobs | $4,200 – $8,400 | $6,300 | −2% |
| Provo, UT | 304,660 jobs | $4,350 – $8,750 | $6,550 | +2% |
| Colorado Springs, CO | 316,060 jobs | $4,350 – $8,800 | $6,600 | +2% |
| Syracuse, NY | 300,130 jobs | $4,550 – $9,200 | $6,900 | +7% |
Extras that change the Cape Coral total
Add-ons start from national price ranges and are scaled by 0.91 for Cape Coral, which is the average of the area's wage index (0.87) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $710 |
| Remove old fence | $1,350 – $2,750 |
Related projects, priced for Cape Coral
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Cape Coral wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−7%) and chain-link fence lowest (−9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,050 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,600 | −9% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,850 | −8% |
Specs and site conditions that change a Cape Coral bid
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
What local crews earn in Cape Coral
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Cape Coral the blend is 0.87.
Carpenters (47-2031), 50% of the weighting: a median of $23.66 an hour, 19% below the US median of $29.12. The middle half of them earn between $21.73 and $28.72 an hour. About 2,640 work in the metro. That is 86.6 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $20.81 an hour, which is 8% below the national $22.66. The middle half of them earn between $17.90 and $22.80 an hour. BLS counts 5,230 of them working in the area, 171.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $130 to the midpoint estimate; the 25th percentile takes off about $50. That is a swing of roughly 0.8% to 2.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Cape Coral-Fort Myers has 304,790 jobs in total (BLS, May 2025), ranking 83rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.73 | $23.66 | $28.72 | $29.12 | 0.81 | metro |
| Construction laborers (47-2061) | 50% | $17.90 | $20.81 | $22.80 | $22.66 | 0.92 | metro |
| Blended | 100% | 0.87 | |||||
Cape Coral weather and the vinyl fence calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Ft Myers Page Fld Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Cape Coral are October through April: 7 of 12. Outside them, May, June, July, August and September have an average daytime high of 90°F or more.
Cape Coral gets about 57 inches of precipitation in a normal year. The wettest months are June, July and August (10.4 inches in August). Inside the workable window, February and November are the driest, at 1.8 and 1.8 inches. The station averages about 120 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 75 | 54 | 2.4 | Workable |
| Feb | 78 | 57 | 1.8 | Workable |
| Mar | 81 | 60 | 2.1 | Workable |
| Apr | 85 | 64 | 2.4 | Workable |
| May | 90 | 69 | 3.5 | Hot |
| Jun | 91 | 74 | 9.7 | Hot |
| Jul | 92 | 75 | 9.4 | Hot |
| Aug | 92 | 75 | 10.4 | Hot |
| Sep | 90 | 74 | 9.0 | Hot |
| Oct | 87 | 69 | 3.1 | Workable |
| Nov | 81 | 62 | 1.8 | Workable |
| Dec | 77 | 57 | 1.9 | Workable |
Cape Coral: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Cape Coral. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,600 to $7,300
6-ft privacy fence, standard white
Premium
$6,900 to $8,600
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,050 | $3,750 – $4,900 | $4,600 – $5,800 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,600 – $7,300 | $6,900 – $8,600 |
| 200 ft (200 linear ft) | $5,700 – $8,000 | $7,450 – $9,700 | $9,150 – $11,400 |
| full lot (300 linear ft) | $8,550 – $12,000 | $11,100 – $14,500 | $13,600 – $17,000 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,300 for Cape Coral, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Cape Coral, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Cape Coral: your questions
+How much does it cost to install a vinyl fence in Cape Coral?
For 150 linear ft, expect $4,300 to $8,600 in the Cape Coral area. A standard-spec job lands at $5,600 to $7,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Cape Coral?
About $28.50 to $56.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Cape Coral or Punta Gorda?
Punta Gorda is 25 miles away. The midpoint for 150 linear ft there is $6,450, which is 0% more than Cape Coral ($6,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Cape Coral?
About 20% at the midpoint, or $1,300 out of $6,450. Materials are 78% and permits 2%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Cape Coral?
$5,700 to $11,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Cape Coral?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Cape Coral area (our national range of $40 to $150 scaled by the local price level).
+Is Cape Coral expensive for vinyl fence compared with the rest of Florida?
Cape Coral is 2% below the Florida statewide estimate ($6,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Cape Coral?
The BLS median is $23.66 an hour in the Cape Coral area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.73 to $28.72.
+What do basic and premium vinyl fence work cost in Cape Coral?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,900 to $8,600. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Cape Coral?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Cape Coral?
$140 to $710, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Cape Coral
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.