Vinyl fence cost in Naples, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,650
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −5%
- US $6,850
- Rank of 300 metros
- #181
- 1 = most expensive
Local price for a vinyl fence in the Naples area: $4,300 to $8,650 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% lower than the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Naples, FL, standard level
$5,650 to $7,350
About $37 to $48.50 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,100 | $1,600 |
| Permits and fees | $75 | $120 |
| Total | $5,650 | $7,350 |
Cost breakdown for 150 linear ft in Naples, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 78% |
| Labor | $670 | $1,350 | $2,000 | 21% |
| Permits and fees | $40 | $100 | $150 | 2% |
| Total | $4,300 | $6,500 | $8,650 | 100% |
What is behind the Naples number
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $23.74 an hour. Add the other trades involved and the blended wage index for Naples is 0.90 (US = 1.00), which puts labor at 21% of the total.
Materials are scaled with BEA's regional price parity for goods. Naples is at 96.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 103.2: $40 to $150.
The best months for vinyl fence in Naples
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Naples Muni Ap (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Naples are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Naples gets about 50 inches of precipitation in a normal year. The wettest months are July, August and September (8.9 inches in August). Inside the workable window, November and December are the driest, at 1.4 and 1.3 inches. The station averages about 103 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 75 | 56 | 1.7 | Workable |
| Feb | 77 | 58 | 1.4 | Workable |
| Mar | 80 | 61 | 1.9 | Workable |
| Apr | 84 | 66 | 2.5 | Workable |
| May | 88 | 70 | 2.8 | Workable |
| Jun | 90 | 74 | 7.4 | Hot |
| Jul | 91 | 76 | 7.8 | Hot |
| Aug | 91 | 76 | 8.9 | Hot |
| Sep | 90 | 75 | 8.6 | Hot |
| Oct | 87 | 71 | 3.9 | Workable |
| Nov | 81 | 63 | 1.4 | Workable |
| Dec | 77 | 59 | 1.3 | Workable |
Who does the work: Naples trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Naples the blend is 0.90.
Carpenters (47-2031), 50% of the weighting: a median of $23.74 an hour, 18% below the US median of $29.12. The middle half of them earn between $20.51 and $28.52 an hour. About 1,300 work in the metro. That is 74.8 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $22.13 an hour, which is in line with the national $22.66. The middle half of them earn between $18.77 and $24.00 an hour. BLS counts 2,340 of them working in the area, 134.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $85. That is a swing of roughly 1.3% to 1.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Naples-Marco Island has 173,880 jobs in total (BLS, May 2025), ranking 134th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $20.51 | $23.74 | $28.52 | $29.12 | 0.82 | metro |
| Construction laborers (47-2061) | 50% | $18.77 | $22.13 | $24.00 | $22.66 | 0.98 | metro |
| Blended | 100% | 0.90 | |||||
What nearby projects cost in Naples
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Naples wage and price inputs. Compared with national midpoints, concrete slab comes out highest (−6%) and wood fence lowest (−7%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,750 | −7% |
| Aluminum fence | 150 linear ft | $3,500 – $10,700 | −7% |
| Concrete slab | 400 sq ft | $2,300 – $4,900 | −6% |
Naples: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Naples. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,050
4-ft picket or ranch rail
Standard
$5,650 to $7,350
6-ft privacy fence, standard white
Premium
$6,950 to $8,650
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,050 | $3,800 – $4,950 | $4,650 – $5,850 |
| 150 ft (150 linear ft) | $4,300 – $6,050 | $5,650 – $7,350 | $6,950 – $8,650 |
| 200 ft (200 linear ft) | $5,750 – $8,050 | $7,500 – $9,800 | $9,200 – $11,500 |
| full lot (300 linear ft) | $8,600 – $12,000 | $11,200 – $14,600 | $13,700 – $17,200 |
Optional extras in Naples
Add-ons start from national price ranges and are scaled by 0.93 for Naples, which is the average of the area's wage index (0.90) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,800 |
How Naples compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,450 to $6,900 across Naples and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Naples, FLthis page | $4,300 – $8,650 | $6,500 | |
| Cape Coral, FL45 miles | $4,300 – $8,600 | $6,450 | −1% |
| Miami, FL55 miles | $4,600 – $9,200 | $6,900 | +6% |
| Punta Gorda, FL65 miles | $4,300 – $8,650 | $6,450 | level |
| Port St. Lucie, FL95 miles | $4,300 – $8,550 | $6,450 | −1% |
| North Port, FL105 miles | $4,350 – $8,700 | $6,500 | level |
| Florida (statewide) | $4,400 – $8,750 | $6,550 | +1% |
| United States | $4,550 – $9,150 | $6,850 | +5% |
Out of the 300 metros we cover, Naples ranks #181 for the cost of this job (#1 is the most expensive). Statewide, Naples is 1% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $4,600 – $9,200 | $6,900 | +6% |
| Tampa, FL | 1,447,120 jobs | $4,300 – $8,600 | $6,450 | −1% |
| Orlando, FL | 1,411,730 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Jacksonville, FL | 765,930 jobs | $4,300 – $8,600 | $6,450 | level |
| North Port, FL | 339,940 jobs | $4,350 – $8,700 | $6,500 | level |
| Cape Coral, FL | 304,790 jobs | $4,300 – $8,600 | $6,450 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Naples against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Green Bay, WI | 174,550 jobs | $4,350 – $8,900 | $6,650 | +2% |
| Mobile, AL | 172,550 jobs | $4,250 – $8,400 | $6,350 | −3% |
| Reading, PA | 174,670 jobs | $4,550 – $9,150 | $6,850 | +5% |
| Visalia, CA | 171,140 jobs | $4,750 – $9,600 | $7,150 | +10% |
Vinyl fence: what moves the price in Naples
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $7,350 for Naples, FL is attached.
Detailed vinyl fence report for Naples, FL, $9
The report lays out the vinyl fence numbers for Naples, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Naples: your questions
+How much does it cost to install a vinyl fence in Naples?
For 150 linear ft, expect $4,300 to $8,650 in the Naples area. A standard-spec job lands at $5,650 to $7,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Naples?
About $28.50 to $56.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Naples or Cape Coral?
Cape Coral is 45 miles away. The midpoint for 150 linear ft there is $6,450, which is 1% less than Naples ($6,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Naples?
About 21% at the midpoint, or $1,350 out of $6,500. Materials are 78% and permits 2%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Naples?
$5,750 to $11,500. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Naples?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Naples area (our national range of $40 to $150 scaled by the local price level).
+Is Naples expensive for vinyl fence compared with the rest of Florida?
Naples is 1% below the Florida statewide estimate ($6,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Naples?
The BLS median is $23.74 an hour in the Naples area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.51 to $28.52.
+What do basic and premium vinyl fence work cost in Naples?
For 150 linear ft, basic work runs $4,300 to $6,050 and premium work $6,950 to $8,650. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Naples?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. November and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Naples?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Naples
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.