Aluminum fence cost in Naples, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,500 – $10,700
- Per linear ft
- $23 – $70
- before permit
- Versus US midpoint
- −7%
- US $7,600
- Rank of 300 metros
- #200
- 1 = most expensive
Local price for an aluminum fence in the Naples area: $3,500 to $10,700 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% lower than the US figure. Carpenters earn a median of $23.74 an hour in the Naples area, 18% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Naples, FL, standard level
$5,650 to $8,500
About $37.50 to $56 per linear ft before permits. Labor is about 32% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,900 | $2,700 |
| Permits and fees | $75 | $120 |
| Total | $5,650 | $8,500 |
Cost breakdown for 150 linear ft in Naples, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,200 | 66% |
| Labor | $1,300 | $2,300 | $3,300 | 32% |
| Permits and fees | $40 | $100 | $150 | 1% |
| Total | $3,500 | $7,100 | $10,700 | 100% |
Why Naples prices look the way they do
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $23.74 an hour. Add the other trades involved and the blended wage index for Naples is 0.88 (US = 1.00), which puts labor at 32% of the total.
Materials are scaled with BEA's regional price parity for goods. Naples is at 96.2 against 100 for the US, so a materials line of $4,900 nationally becomes $4,700 here (midpoint, 150 linear ft). Permits follow the all-items index of 103.2: $40 to $150.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Naples. The wage table below marks each row.
Pick a size, pick a tier: aluminum fence pricing in Naples
The cited range is split into basic, standard and premium bands, then scaled to Naples. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,500 to $6,400
Standard picket or ornamental, 4 ft
Standard
$5,650 to $8,500
Ornamental pool-code fence, 4-5 ft
Premium
$7,800 to $10,700
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,350 – $4,300 | $3,800 – $5,700 | $5,250 – $7,150 |
| 150 ft (150 linear ft) | $3,500 – $6,400 | $5,650 – $8,500 | $7,800 – $10,700 |
| 200 ft (200 linear ft) | $4,700 – $8,500 | $7,550 – $11,300 | $10,400 – $14,200 |
How Naples compares
Of the five closest metros, 3 are cheaper than Naples. Port St. Lucie is the lowest at about $7,000 (midpoint, 150 linear ft), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Naples, FLthis page | $3,500 – $10,700 | $7,100 | |
| Cape Coral, FL45 miles | $3,500 – $10,600 | $7,050 | −1% |
| Miami, FL55 miles | $3,700 – $11,300 | $7,500 | +6% |
| Punta Gorda, FL65 miles | $3,500 – $10,600 | $7,050 | level |
| Port St. Lucie, FL95 miles | $3,500 – $10,500 | $7,000 | −1% |
| North Port, FL105 miles | $3,550 – $10,700 | $7,100 | level |
| Florida (statewide) | $3,550 – $10,700 | $7,150 | +1% |
| United States | $3,800 – $11,400 | $7,600 | +7% |
Out of the 300 metros we cover, Naples ranks #200 for the cost of this job (#1 is the most expensive). Statewide, Naples is 1% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,700 – $11,300 | $7,500 | +6% |
| Tampa, FL | 1,447,120 jobs | $3,500 – $10,600 | $7,050 | −1% |
| Orlando, FL | 1,411,730 jobs | $3,450 – $10,500 | $7,000 | −2% |
| Jacksonville, FL | 765,930 jobs | $3,500 – $10,600 | $7,050 | −1% |
| North Port, FL | 339,940 jobs | $3,550 – $10,700 | $7,100 | level |
| Cape Coral, FL | 304,790 jobs | $3,500 – $10,600 | $7,050 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Naples against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Green Bay, WI | 174,550 jobs | $3,800 – $11,300 | $7,600 | +7% |
| Mobile, AL | 172,550 jobs | $3,400 – $10,300 | $6,850 | −3% |
| Reading, PA | 174,670 jobs | $3,800 – $11,400 | $7,600 | +7% |
| Visalia, CA | 171,140 jobs | $4,050 – $12,100 | $8,100 | +14% |
Optional extras in Naples
Add-ons start from national price ranges and are scaled by 0.92 for Naples, which is the average of the area's wage index (0.88) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $830 |
Why two Naples quotes can differ
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Who does the work: Naples trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Naples the blend is 0.88.
Carpenters (47-2031), 40% of the weighting: a median of $23.74 an hour, 18% below the US median of $29.12. The middle half of them earn between $20.51 and $28.52 an hour. About 1,300 work in the metro. That is 74.8 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $22.13 an hour, which is in line with the national $22.66. The middle half of them earn between $18.77 and $24.00 an hour. BLS counts 2,340 of them working in the area, 134.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Naples metro, so we used the Florida statewide median: $23.87 an hour against $29.71 for the US. The middle half of them earn between $19.61 and $28.87 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $170 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 1.6% to 2.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Naples-Marco Island has 173,880 jobs in total (BLS, May 2025), ranking 134th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $20.51 | $23.74 | $28.52 | $29.12 | 0.82 | metro |
| Construction laborers (47-2061) | 40% | $18.77 | $22.13 | $24.00 | $22.66 | 0.98 | metro |
| Sheet metal workers (47-2211) | 20% | $19.61 | $23.87 | $28.87 | $29.71 | 0.80 | state |
| Blended | 100% | 0.88 | |||||
Related projects, priced for Naples
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Naples wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−5%) and wood fence lowest (−7%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,650 | −5% |
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,750 | −7% |
| Inground pool | 450 sq ft | $34,100 – $106,500 | −6% |
The best months for aluminum fence in Naples
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Naples Muni Ap (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Naples are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Naples gets about 50 inches of precipitation in a normal year. The wettest months are July, August and September (8.9 inches in August). Inside the workable window, November and December are the driest, at 1.4 and 1.3 inches. The station averages about 103 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 75 | 56 | 1.7 | Workable |
| Feb | 77 | 58 | 1.4 | Workable |
| Mar | 80 | 61 | 1.9 | Workable |
| Apr | 84 | 66 | 2.5 | Workable |
| May | 88 | 70 | 2.8 | Workable |
| Jun | 90 | 74 | 7.4 | Hot |
| Jul | 91 | 76 | 7.8 | Hot |
| Aug | 91 | 76 | 8.9 | Hot |
| Sep | 90 | 75 | 8.6 | Hot |
| Oct | 87 | 71 | 3.9 | Workable |
| Nov | 81 | 63 | 1.4 | Workable |
| Dec | 77 | 59 | 1.3 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $8,500 for Naples, FL is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Naples, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Naples: your questions
+How much does it cost to install an aluminum fence in Naples?
For 150 linear ft, expect $3,500 to $10,700 in the Naples area. A standard-spec job lands at $5,650 to $8,500. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Naples?
About $23 to $70 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Naples or Cape Coral?
Cape Coral is 45 miles away. The midpoint for 150 linear ft there is $7,050, which is 1% less than Naples ($7,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Naples?
About 32% at the midpoint, or $2,300 out of $7,100. Materials are 66% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Naples?
$3,500 to $10,700. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Naples?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Naples area (our national range of $40 to $150 scaled by the local price level).
+Is Naples expensive for aluminum fence compared with the rest of Florida?
Naples is 1% below the Florida statewide estimate ($7,150 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Naples?
The BLS median is $23.74 an hour in the Naples area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.51 to $28.52.
+What do basic and premium aluminum fence work cost in Naples?
For 150 linear ft, basic work runs $3,500 to $6,400 and premium work $7,800 to $10,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Naples?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. November and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Naples?
$180 to $830, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Naples
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.