Skip to content
CostLocal

Aluminum fence cost in Punta Gorda, FL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$3,500 – $10,600
Per linear ft
$23 – $70
before permit
Versus US midpoint
−7%
US $7,600
Rank of 300 metros
#206
1 = most expensive

Punta Gorda homeowners pay roughly $3,500 to $10,600 to install an aluminum fence at 150 linear ft, or $23 to $70 per linear ft (permit not included). Against the US midpoint, Punta Gorda is 7% lower. Carpenters earn a median of $23.33 an hour in the Punta Gorda area, 20% below the US median of $29.12.

Estimate your aluminum fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Ornamental pool-code fence, 4-5 ft

Add-ons

Estimated cost for 150 linear ft in Punta Gorda, FL, standard level

$5,650 to $8,500

About $37 to $56 per linear ft before permits. Labor is about 32% of the bill.

Cost breakdown
PartLowHigh
Materials$3,700$5,700
Labor$1,900$2,650
Permits and fees$75$120
Total$5,650$8,500
Save and get a PDF report

Cost breakdown for 150 linear ft in Punta Gorda, FL

Part of the jobLowMidpointHighShare
Materials$2,150$4,700$7,20066%
Labor$1,300$2,300$3,25032%
Permits and fees$40$95$1501%
Total$3,500$7,050$10,600100%

Why Punta Gorda prices look the way they do

We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Punta Gorda wages are 0.87 times the national level. Labor makes up about 32% of the midpoint estimate (35% at national prices).

On the materials line, the BEA goods price index for the Punta Gorda metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (100.5) and land at $40 to $150.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Punta Gorda. The wage table below marks each row.

When to schedule aluminum fence in Punta Gorda

We use NOAA's 1991-2020 climate normals for Punta Gorda Charlotte Co Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

October through April is the stretch where exterior installation runs into the fewest weather problems in Punta Gorda (7 of 12 months). May, June, July, August and September have an average daytime high of 90°F or more.

Punta Gorda gets about 53 inches of precipitation in a normal year. The wettest months are June, July and August (9.2 inches in June). Inside the workable window, November and December are the driest, at 2.1 and 2.0 inches. The station averages about 124 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Punta Gorda Charlotte Co Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan75512.3Workable
Feb78532.5Workable
Mar81562.3Workable
Apr86612.2Workable
May90663.3Hot
Jun92729.2Hot
Jul93748.1Hot
Aug93759.1Hot
Sep91736.9Hot
Oct87673.0Workable
Nov82592.1Workable
Dec78542.0Workable

Punta Gorda: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Punta Gorda wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$3,500 to $6,350

Standard picket or ornamental, 4 ft

Standard

$5,650 to $8,500

Ornamental pool-code fence, 4-5 ft

Premium

$7,800 to $10,600

Tall privacy slat or custom ornamental

Cost by size and quality level
SizeBasicStandardPremium
pool fence (100 linear ft)$2,350 – $4,250$3,800 – $5,700$5,200 – $7,150
150 ft (150 linear ft)$3,500 – $6,350$5,650 – $8,500$7,800 – $10,600
200 ft (200 linear ft)$4,650 – $8,450$7,500 – $11,300$10,300 – $14,100

Why two Punta Gorda quotes can differ

  • Style

    Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).

  • Soil and slope

    Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.

  • Pool codes

    Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Punta Gorda is 0.87 times the national level.

For carpenters (47-2031, weighted 40%) the local median is $23.33 an hour, which is 20% below the national $29.12. The middle half of them earn between $20.62 and $28.72 an hour. BLS counts 340 of them working in the area, 59.1 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.

Construction laborers (47-2061), 40% of the weighting: a median of $21.88 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.16 and $23.74 an hour. About 810 work in the metro. That is 140.8 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Punta Gorda metro, so we used the Florida statewide median: $23.87 an hour against $29.71 for the US. The middle half of them earn between $19.61 and $28.87 an hour.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.72 an hour) instead of the median, the labor line grows by about $190. At the 25th percentile ($20.62) it shrinks by about $100. The total moves by 2.8% or 1.4%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 57,530 jobs in the Punta Gorda area. That makes it the 297th largest of the 300 metros we cover, with 0.04% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)40%$20.62$23.33$28.72$29.120.80metro
Construction laborers (47-2061)40%$18.16$21.88$23.74$22.660.97metro
Sheet metal workers (47-2211)20%$19.61$23.87$28.87$29.710.80state
Blended100%0.87

What nearby projects cost in Punta Gorda

Because every project leans on different trades, Punta Gorda's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −5% and wood fence −8%.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,300 – $8,650−5%
Wood fence150 linear ft$2,800 – $7,100−8%
Chain-link fence150 linear ft$1,450 – $5,650−7%
Inground pool450 sq ft$33,300 – $104,000−8%

Extras that change the Punta Gorda total

Extras are quoted nationally and then scaled to Punta Gorda by the average of the local wage index (0.87) and goods index (0.96), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$180 – $820

Punta Gorda against nearby metros and the rest of Florida

Of the five closest metros, 3 are cheaper than Punta Gorda. Lakeland is the lowest at about $6,850 (midpoint, 150 linear ft), 75 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Punta Gorda, FLthis page$3,500 – $10,600$7,050
Cape Coral, FL25 miles$3,500 – $10,600$7,050level
North Port, FL40 miles$3,550 – $10,700$7,100+1%
Naples, FL65 miles$3,500 – $10,700$7,100level
Lakeland, FL75 miles$3,400 – $10,300$6,850−3%
Tampa, FL90 miles$3,500 – $10,600$7,050level
Florida (statewide)$3,550 – $10,700$7,150+1%
United States$3,800 – $11,400$7,600+8%

Across 300 US metros, Punta Gorda comes in at #206 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Punta Gorda is 1% below the Florida figure.

Other Florida metros

Florida metros compared with Punta Gorda
MetroSizeRangeMidpointvs. here
Miami, FL2,819,940 jobs$3,700 – $11,300$7,500+6%
Tampa, FL1,447,120 jobs$3,500 – $10,600$7,050level
Orlando, FL1,411,730 jobs$3,450 – $10,500$7,000−1%
Jacksonville, FL765,930 jobs$3,500 – $10,600$7,050level
North Port, FL339,940 jobs$3,550 – $10,700$7,100+1%
Cape Coral, FL304,790 jobs$3,500 – $10,600$7,050level

Cities with a workforce like Punta Gorda's

Big cities and small ones price differently, so here is Punta Gorda against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Texarkana, TX57,580 jobs$3,250 – $9,950$6,600−6%
Pittsfield, MA56,810 jobs$3,800 – $11,400$7,600+7%
Sebastian, FL57,620 jobs$3,500 – $10,600$7,050level
Lake Havasu City, AZ56,490 jobs$3,450 – $10,500$7,000−1%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $8,500 for Punta Gorda, FL is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Punta Gorda, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Aluminum fence in Punta Gorda: your questions

+How much does it cost to install an aluminum fence in Punta Gorda?

For 150 linear ft, expect $3,500 to $10,600 in the Punta Gorda area. A standard-spec job lands at $5,650 to $8,500. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for aluminum fence in Punta Gorda?

About $23 to $70 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.

+Is aluminum fence cheaper in Punta Gorda or Cape Coral?

Cape Coral is 25 miles away. The midpoint for 150 linear ft there is $7,050, which is 0% less than Punta Gorda ($7,050). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Punta Gorda?

About 32% at the midpoint, or $2,300 out of $7,050. Materials are 66% and permits 1%. Nationally, labor is 35%.

+What would 150 ft (150 linear ft) cost in Punta Gorda?

$3,500 to $10,600. Pick a different size in the estimator above to get your own number.

+Does aluminum fence need a permit in Punta Gorda?

Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Punta Gorda area (our national range of $40 to $150 scaled by the local price level).

+Is Punta Gorda expensive for aluminum fence compared with the rest of Florida?

Punta Gorda is 1% below the Florida statewide estimate ($7,150 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.

+What do carpenters earn in Punta Gorda?

The BLS median is $23.33 an hour in the Punta Gorda area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.62 to $28.72.

+What do basic and premium aluminum fence work cost in Punta Gorda?

For 150 linear ft, basic work runs $3,500 to $6,350 and premium work $7,800 to $10,600. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.

+When is the best time to install an aluminum fence in Punta Gorda?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. November and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Punta Gorda?

$180 to $820, from a national range scaled by the local wage and goods indexes.

Aluminum fence near Punta Gorda

Aluminum fence: all pricesAluminum fence in FloridaAll projects in Punta GordaFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.