Aluminum fence cost in Tampa, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,500 – $10,600
- Per linear ft
- $23 – $69.50
- before permit
- Versus US midpoint
- −7%
- US $7,600
- Rank of 300 metros
- #215
- 1 = most expensive
Local price for an aluminum fence in the Tampa area: $3,500 to $10,600 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% lower than the US figure. Carpenters earn a median of $25.06 an hour in the Tampa area, 14% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Tampa, FL, standard level
$5,650 to $8,450
About $37 to $55.50 per linear ft before permits. Labor is about 33% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,650 | $5,650 |
| Labor | $1,900 | $2,700 |
| Permits and fees | $75 | $120 |
| Total | $5,650 | $8,450 |
Cost breakdown for 150 linear ft in Tampa, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,650 | $7,150 | 66% |
| Labor | $1,300 | $2,300 | $3,300 | 33% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,500 | $7,050 | $10,600 | 100% |
Why Tampa prices look the way they do
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $25.06 an hour. Add the other trades involved and the blended wage index for Tampa is 0.88 (US = 1.00), which puts labor at 33% of the total.
Materials are scaled with BEA's regional price parity for goods. Tampa is at 95.5 against 100 for the US, so a materials line of $4,900 nationally becomes $4,650 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.9: $40 to $150.
The best months for aluminum fence in Tampa
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Tampa Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Tampa are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Tampa gets about 49 inches of precipitation in a normal year. The wettest months are June, July and August (9.0 inches in August). Inside the workable window, October and November are the driest, at 2.3 and 1.4 inches. The station averages about 94 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 71 | 53 | 2.6 | Workable |
| Feb | 74 | 56 | 2.6 | Workable |
| Mar | 78 | 59 | 2.5 | Workable |
| Apr | 83 | 65 | 2.5 | Workable |
| May | 88 | 71 | 2.6 | Workable |
| Jun | 91 | 75 | 7.4 | Hot |
| Jul | 91 | 77 | 7.8 | Hot |
| Aug | 91 | 77 | 9.0 | Hot |
| Sep | 90 | 75 | 6.1 | Hot |
| Oct | 86 | 69 | 2.3 | Workable |
| Nov | 79 | 61 | 1.4 | Workable |
| Dec | 74 | 56 | 2.6 | Workable |
Optional extras in Tampa
Add-ons start from national price ranges and are scaled by 0.92 for Tampa, which is the average of the area's wage index (0.88) and goods price index (0.95). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $820 |
Who does the work: Tampa trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tampa the blend is 0.88.
Carpenters (47-2031), 40% of the weighting: a median of $25.06 an hour, 14% below the US median of $29.12. The middle half of them earn between $22.58 and $29.31 an hour. About 6,010 work in the metro. That is 41.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 40%) the local median is $21.04 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.87 and $22.81 an hour. BLS counts 12,860 of them working in the area, 88.9 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $23.80 an hour, 20% below the US median of $29.71. The middle half of them earn between $18.98 and $28.29 an hour. About 970 work in the metro. That is 6.7 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $150 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 1.3% to 2.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tampa-St. Petersburg-Clearwater has 1,447,120 jobs in total (BLS, May 2025), ranking 19th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $22.58 | $25.06 | $29.31 | $29.12 | 0.86 | metro |
| Construction laborers (47-2061) | 40% | $17.87 | $21.04 | $22.81 | $22.66 | 0.93 | metro |
| Sheet metal workers (47-2211) | 20% | $18.98 | $23.80 | $28.29 | $29.71 | 0.80 | metro |
| Blended | 100% | 0.88 | |||||
How Tampa compares
Same job, same size (150 linear ft), priced for the nearest metros. North Port is the priciest of the group at $7,100. Ocala is the cheapest at $6,850.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tampa, FLthis page | $3,500 – $10,600 | $7,050 | |
| Lakeland, FL50 miles | $3,400 – $10,300 | $6,850 | −3% |
| North Port, FL55 miles | $3,550 – $10,700 | $7,100 | +1% |
| Orlando, FL75 miles | $3,450 – $10,500 | $7,000 | −1% |
| Ocala, FL80 miles | $3,400 – $10,300 | $6,850 | −3% |
| Punta Gorda, FL90 miles | $3,500 – $10,600 | $7,050 | level |
| Florida (statewide) | $3,550 – $10,700 | $7,150 | +1% |
| United States | $3,800 – $11,400 | $7,600 | +8% |
Out of the 300 metros we cover, Tampa ranks #215 for the cost of this job (#1 is the most expensive). Statewide, Tampa is 1% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,700 – $11,300 | $7,500 | +6% |
| Orlando, FL | 1,411,730 jobs | $3,450 – $10,500 | $7,000 | −1% |
| Jacksonville, FL | 765,930 jobs | $3,500 – $10,600 | $7,050 | level |
| North Port, FL | 339,940 jobs | $3,550 – $10,700 | $7,100 | +1% |
| Cape Coral, FL | 304,790 jobs | $3,500 – $10,600 | $7,050 | level |
| Lakeland, FL | 265,280 jobs | $3,400 – $10,300 | $6,850 | −3% |
Metros of a similar size
Big cities and small ones price differently, so here is Tampa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| San Diego, CA | 1,538,060 jobs | $4,300 – $12,900 | $8,600 | +22% |
| Orlando, FL | 1,411,730 jobs | $3,450 – $10,500 | $7,000 | −1% |
| Denver, CO | 1,609,350 jobs | $3,900 – $11,600 | $7,750 | +10% |
| Charlotte, NC | 1,358,370 jobs | $3,550 – $10,700 | $7,150 | +1% |
Related projects, priced for Tampa
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Tampa wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−6%) and inground pool lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,600 | −6% |
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Inground pool | 450 sq ft | $33,200 – $104,000 | −8% |
Cost by quality level and size in Tampa
The cited range is split into basic, standard and premium bands, then scaled to Tampa. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,500 to $6,350
Standard picket or ornamental, 4 ft
Standard
$5,650 to $8,450
Ornamental pool-code fence, 4-5 ft
Premium
$7,750 to $10,600
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,350 – $4,250 | $3,800 – $5,700 | $5,200 – $7,100 |
| 150 ft (150 linear ft) | $3,500 – $6,350 | $5,650 – $8,450 | $7,750 – $10,600 |
| 200 ft (200 linear ft) | $4,650 – $8,400 | $7,500 – $11,300 | $10,300 – $14,100 |
Why two Tampa quotes can differ
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $8,450 for Tampa, FL is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Tampa, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Tampa: your questions
+How much does it cost to install an aluminum fence in Tampa?
For 150 linear ft, expect $3,500 to $10,600 in the Tampa area. A standard-spec job lands at $5,650 to $8,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Tampa?
About $23 to $69.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Tampa or Lakeland?
Lakeland is 50 miles away. The midpoint for 150 linear ft there is $6,850, which is 3% less than Tampa ($7,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tampa?
About 33% at the midpoint, or $2,300 out of $7,050. Materials are 66% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Tampa?
$3,500 to $10,600. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Tampa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Tampa area (our national range of $40 to $150 scaled by the local price level).
+Is Tampa expensive for aluminum fence compared with the rest of Florida?
Tampa is 1% below the Florida statewide estimate ($7,150 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Tampa?
The BLS median is $25.06 an hour in the Tampa area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.58 to $29.31.
+What do basic and premium aluminum fence work cost in Tampa?
For 150 linear ft, basic work runs $3,500 to $6,350 and premium work $7,750 to $10,600. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Tampa?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Tampa?
$180 to $820, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Tampa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.