Chain-link fence cost in Tampa, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,450 – $5,650
- Per linear ft
- $9.35 – $36.50
- before permit
- Versus US midpoint
- −8%
- US $3,850
- Rank of 300 metros
- #198
- 1 = most expensive
A chain-link fence in Tampa, FL usually costs $1,450 to $5,650 for 150 linear ft. That works out to about $9.35 to $36.50 per linear ft before permits. Compared with the national midpoint that is $290 less. Construction laborers earn a median of $21.04 an hour in the Tampa area, 7% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Tampa, FL, standard level
$2,700 to $4,400
About $17.50 to $28.50 per linear ft before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,450 | $2,700 |
| Permits and fees | $75 | $120 |
| Total | $2,700 | $4,400 |
Cost breakdown for 150 linear ft in Tampa, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $860 | $1,350 | $1,850 | 38% |
| Labor | $540 | $2,100 | $3,650 | 59% |
| Permits and fees | $40 | $95 | $150 | 3% |
| Total | $1,450 | $3,550 | $5,650 | 100% |
Why Tampa prices look the way they do
The wage side of the estimate leans on construction laborers, who do 60% of the hours on a typical job. Their local median is $21.04 an hour. Add the other trades involved and the blended wage index for Tampa is 0.90 (US = 1.00), which puts labor at 59% of the total.
Materials are scaled with BEA's regional price parity for goods. Tampa is at 95.5 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.9: $40 to $150.
Tampa: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Tampa. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,450 to $3,150
4-ft galvanized, front yard
Standard
$2,700 to $4,400
6-ft galvanized backyard fence
Premium
$3,950 to $5,650
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $970 – $2,100 | $1,850 – $2,950 | $2,700 – $3,850 |
| 150 ft (150 linear ft) | $1,450 – $3,150 | $2,700 – $4,400 | $3,950 – $5,650 |
| 200 ft (200 linear ft) | $1,900 – $4,150 | $3,600 – $5,800 | $5,250 – $7,500 |
| full lot (300 linear ft) | $2,850 – $6,150 | $5,350 – $8,650 | $7,850 – $11,200 |
Related projects, priced for Tampa
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Tampa wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−6%) and gravel driveway lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Vinyl fence | 150 linear ft | $4,300 – $8,600 | −6% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,400 | −8% |
Tampa weather and the chain-link fence calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Tampa Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Tampa are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Tampa gets about 49 inches of precipitation in a normal year. The wettest months are June, July and August (9.0 inches in August). Inside the workable window, October and November are the driest, at 2.3 and 1.4 inches. The station averages about 94 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 71 | 53 | 2.6 | Workable |
| Feb | 74 | 56 | 2.6 | Workable |
| Mar | 78 | 59 | 2.5 | Workable |
| Apr | 83 | 65 | 2.5 | Workable |
| May | 88 | 71 | 2.6 | Workable |
| Jun | 91 | 75 | 7.4 | Hot |
| Jul | 91 | 77 | 7.8 | Hot |
| Aug | 91 | 77 | 9.0 | Hot |
| Sep | 90 | 75 | 6.1 | Hot |
| Oct | 86 | 69 | 2.3 | Workable |
| Nov | 79 | 61 | 1.4 | Workable |
| Dec | 74 | 56 | 2.6 | Workable |
Extras that change the Tampa total
Add-ons start from national price ranges and are scaled by 0.93 for Tampa, which is the average of the area's wage index (0.90) and goods price index (0.95). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $75 – $930 |
What local crews earn in Tampa
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tampa the blend is 0.90.
For construction laborers (47-2061, weighted 60%) the local median is $21.04 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.87 and $22.81 an hour. BLS counts 12,860 of them working in the area, 88.9 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Carpenters (47-2031), 40% of the weighting: a median of $25.06 an hour, 14% below the US median of $29.12. The middle half of them earn between $22.58 and $29.31 an hour. About 6,010 work in the metro. That is 41.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $110 to the midpoint estimate; the 25th percentile takes off about $200. That is a swing of roughly 5.5% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tampa-St. Petersburg-Clearwater has 1,447,120 jobs in total (BLS, May 2025), ranking 19th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $17.87 | $21.04 | $22.81 | $22.66 | 0.93 | metro |
| Carpenters (47-2031) | 40% | $22.58 | $25.06 | $29.31 | $29.12 | 0.86 | metro |
| Blended | 100% | 0.90 | |||||
Is Tampa cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $3,300 to $3,600 across Tampa and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tampa, FLthis page | $1,450 – $5,650 | $3,550 | |
| Lakeland, FL50 miles | $1,400 – $5,300 | $3,350 | −6% |
| North Port, FL55 miles | $1,450 – $5,750 | $3,600 | +2% |
| Orlando, FL75 miles | $1,400 – $5,450 | $3,450 | −3% |
| Ocala, FL80 miles | $1,400 – $5,250 | $3,300 | −7% |
| Punta Gorda, FL90 miles | $1,450 – $5,650 | $3,550 | level |
| Florida (statewide) | $1,450 – $5,650 | $3,550 | level |
| United States | $1,550 – $6,150 | $3,850 | +8% |
Out of the 300 metros we cover, Tampa ranks #198 for the cost of this job (#1 is the most expensive). Statewide, Tampa is 0% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,550 – $5,900 | $3,700 | +5% |
| Orlando, FL | 1,411,730 jobs | $1,400 – $5,450 | $3,450 | −3% |
| Jacksonville, FL | 765,930 jobs | $1,450 – $5,600 | $3,550 | −1% |
| North Port, FL | 339,940 jobs | $1,450 – $5,750 | $3,600 | +2% |
| Cape Coral, FL | 304,790 jobs | $1,450 – $5,600 | $3,500 | −1% |
| Lakeland, FL | 265,280 jobs | $1,400 – $5,300 | $3,350 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Tampa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| San Diego, CA | 1,538,060 jobs | $1,750 – $7,200 | $4,450 | +26% |
| Orlando, FL | 1,411,730 jobs | $1,400 – $5,450 | $3,450 | −3% |
| Denver, CO | 1,609,350 jobs | $1,600 – $6,400 | $4,000 | +12% |
| Charlotte, NC | 1,358,370 jobs | $1,450 – $5,750 | $3,600 | +2% |
Why two Tampa quotes can differ
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,700 to $4,400 for Tampa, FL is attached.
Take this estimate with you: PDF report, $9
The report lays out the chain-link fence numbers for Tampa, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Tampa: your questions
+How much does it cost to install a chain-link fence in Tampa?
For 150 linear ft, expect $1,450 to $5,650 in the Tampa area. A standard-spec job lands at $2,700 to $4,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Tampa?
About $9.35 to $36.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Tampa or Lakeland?
Lakeland is 50 miles away. The midpoint for 150 linear ft there is $3,350, which is 6% less than Tampa ($3,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tampa?
About 59% at the midpoint, or $2,100 out of $3,550. Materials are 38% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Tampa?
$1,900 to $7,500. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Tampa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Tampa area (our national range of $40 to $150 scaled by the local price level).
+Is Tampa expensive for chain-link fence compared with the rest of Florida?
Tampa is 0% below the Florida statewide estimate ($3,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do construction laborers earn in Tampa?
The BLS median is $21.04 an hour in the Tampa area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.87 to $22.81.
+What do basic and premium chain-link fence work cost in Tampa?
For 150 linear ft, basic work runs $1,450 to $3,150 and premium work $3,950 to $5,650. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Tampa?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Tampa?
$75 to $930, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Tampa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).