Chain-link fence cost in Cape Coral, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,450 – $5,600
- Per linear ft
- $9.30 – $36
- before permit
- Versus US midpoint
- −9%
- US $3,850
- Rank of 300 metros
- #220
- 1 = most expensive
Local price for a chain-link fence in the Cape Coral area: $1,450 to $5,600 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Construction laborers earn a median of $20.81 an hour in the Cape Coral area, 8% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Cape Coral, FL, standard level
$2,700 to $4,350
About $17.50 to $28 per linear ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,450 | $2,650 |
| Permits and fees | $75 | $120 |
| Total | $2,700 | $4,350 |
Cost breakdown for 150 linear ft in Cape Coral, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $870 | $1,350 | $1,900 | 39% |
| Labor | $530 | $2,050 | $3,550 | 58% |
| Permits and fees | $40 | $95 | $150 | 3% |
| Total | $1,450 | $3,500 | $5,600 | 100% |
Why Cape Coral prices look the way they do
Labor is 58% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is construction laborers (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Cape Coral the blended ratio comes out at 0.88.
Materials are scaled with BEA's regional price parity for goods. Cape Coral is at 96.2 against 100 for the US, so a materials line of $1,450 nationally becomes $1,350 here (midpoint, 150 linear ft). Permits follow the all-items index of 102.3: $40 to $150.
Add-ons priced for Cape Coral
Add-ons start from national price ranges and are scaled by 0.92 for Cape Coral, which is the average of the area's wage index (0.88) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $75 – $920 |
Is Cape Coral cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Cape Coral. Lakeland is the lowest at about $3,350 (midpoint, 150 linear ft), 100 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Cape Coral, FLthis page | $1,450 – $5,600 | $3,500 | |
| Punta Gorda, FL25 miles | $1,450 – $5,650 | $3,550 | +2% |
| Naples, FL45 miles | $1,450 – $5,750 | $3,600 | +2% |
| North Port, FL60 miles | $1,450 – $5,750 | $3,600 | +3% |
| Lakeland, FL100 miles | $1,400 – $5,300 | $3,350 | −5% |
| Miami, FL100 miles | $1,550 – $5,900 | $3,700 | +6% |
| Florida (statewide) | $1,450 – $5,650 | $3,550 | +2% |
| United States | $1,550 – $6,150 | $3,850 | +10% |
Out of the 300 metros we cover, Cape Coral ranks #220 for the cost of this job (#1 is the most expensive). Statewide, Cape Coral is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,550 – $5,900 | $3,700 | +6% |
| Tampa, FL | 1,447,120 jobs | $1,450 – $5,650 | $3,550 | +1% |
| Orlando, FL | 1,411,730 jobs | $1,400 – $5,450 | $3,450 | −2% |
| Jacksonville, FL | 765,930 jobs | $1,450 – $5,600 | $3,550 | +1% |
| North Port, FL | 339,940 jobs | $1,450 – $5,750 | $3,600 | +3% |
| Lakeland, FL | 265,280 jobs | $1,400 – $5,300 | $3,350 | −5% |
Metros of a similar size
Big cities and small ones price differently, so here is Cape Coral against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Wichita, KS | 308,570 jobs | $1,400 – $5,450 | $3,450 | −2% |
| Provo, UT | 304,660 jobs | $1,450 – $5,850 | $3,650 | +5% |
| Colorado Springs, CO | 316,060 jobs | $1,500 – $5,950 | $3,700 | +6% |
| Syracuse, NY | 300,130 jobs | $1,550 – $6,300 | $3,900 | +12% |
Pick a size, pick a tier: chain-link fence pricing in Cape Coral
The cited range is split into basic, standard and premium bands, then scaled to Cape Coral. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,450 to $3,100
4-ft galvanized, front yard
Standard
$2,700 to $4,350
6-ft galvanized backyard fence
Premium
$3,900 to $5,600
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $970 – $2,100 | $1,800 – $2,950 | $2,650 – $3,750 |
| 150 ft (150 linear ft) | $1,450 – $3,100 | $2,700 – $4,350 | $3,900 – $5,600 |
| 200 ft (200 linear ft) | $1,900 – $4,100 | $3,550 – $5,750 | $5,200 – $7,400 |
| full lot (300 linear ft) | $2,800 – $6,100 | $5,300 – $8,550 | $7,750 – $11,000 |
The best months for chain-link fence in Cape Coral
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Ft Myers Page Fld Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Cape Coral are October through April: 7 of 12. Outside them, May, June, July, August and September have an average daytime high of 90°F or more.
Cape Coral gets about 57 inches of precipitation in a normal year. The wettest months are June, July and August (10.4 inches in August). Inside the workable window, February and November are the driest, at 1.8 and 1.8 inches. The station averages about 120 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 75 | 54 | 2.4 | Workable |
| Feb | 78 | 57 | 1.8 | Workable |
| Mar | 81 | 60 | 2.1 | Workable |
| Apr | 85 | 64 | 2.4 | Workable |
| May | 90 | 69 | 3.5 | Hot |
| Jun | 91 | 74 | 9.7 | Hot |
| Jul | 92 | 75 | 9.4 | Hot |
| Aug | 92 | 75 | 10.4 | Hot |
| Sep | 90 | 74 | 9.0 | Hot |
| Oct | 87 | 69 | 3.1 | Workable |
| Nov | 81 | 62 | 1.8 | Workable |
| Dec | 77 | 57 | 1.9 | Workable |
Who does the work: Cape Coral trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Cape Coral the blend is 0.88.
For construction laborers (47-2061, weighted 60%) the local median is $20.81 an hour, which is 8% below the national $22.66. The middle half of them earn between $17.90 and $22.80 an hour. BLS counts 5,230 of them working in the area, 171.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Carpenters (47-2031), 40% of the weighting: a median of $23.66 an hour, 19% below the US median of $29.12. The middle half of them earn between $21.73 and $28.72 an hour. About 2,640 work in the metro. That is 86.6 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $180. That is a swing of roughly 5.1% to 3.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Cape Coral-Fort Myers has 304,790 jobs in total (BLS, May 2025), ranking 83rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $17.90 | $20.81 | $22.80 | $22.66 | 0.92 | metro |
| Carpenters (47-2031) | 40% | $21.73 | $23.66 | $28.72 | $29.12 | 0.81 | metro |
| Blended | 100% | 0.88 | |||||
Specs and site conditions that change a Cape Coral bid
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Planning more than one job in Cape Coral?
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Cape Coral wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−6%) and gravel driveway lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,050 | −8% |
| Vinyl fence | 150 linear ft | $4,300 – $8,600 | −6% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,350 | −8% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,700 to $4,350 for Cape Coral, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Cape Coral, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Cape Coral: your questions
+How much does it cost to install a chain-link fence in Cape Coral?
For 150 linear ft, expect $1,450 to $5,600 in the Cape Coral area. A standard-spec job lands at $2,700 to $4,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Cape Coral?
About $9.30 to $36 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Cape Coral or Punta Gorda?
Punta Gorda is 25 miles away. The midpoint for 150 linear ft there is $3,550, which is 2% more than Cape Coral ($3,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Cape Coral?
About 58% at the midpoint, or $2,050 out of $3,500. Materials are 39% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Cape Coral?
$1,900 to $7,400. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Cape Coral?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Cape Coral area (our national range of $40 to $150 scaled by the local price level).
+Is Cape Coral expensive for chain-link fence compared with the rest of Florida?
Cape Coral is 2% below the Florida statewide estimate ($3,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do construction laborers earn in Cape Coral?
The BLS median is $20.81 an hour in the Cape Coral area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.90 to $22.80.
+What do basic and premium chain-link fence work cost in Cape Coral?
For 150 linear ft, basic work runs $1,450 to $3,100 and premium work $3,900 to $5,600. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Cape Coral?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Cape Coral?
$75 to $920, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Cape Coral
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).