Chain-link fence cost in Miami, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,550 – $5,900
- Per linear ft
- $9.90 – $38.50
- before permit
- Versus US midpoint
- −3%
- US $3,850
- Rank of 300 metros
- #148
- 1 = most expensive
Local price for a chain-link fence in the Miami area: $1,550 to $5,900 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 3% lower than the US figure. Construction laborers earn a median of $21.88 an hour in the Miami area, 3% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Miami, FL, standard level
$2,850 to $4,600
About $18.50 to $30 per linear ft before permits. Labor is about 57% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,250 | $1,700 |
| Labor | $1,500 | $2,750 |
| Permits and fees | $85 | $130 |
| Total | $2,850 | $4,600 |
Cost breakdown for 150 linear ft in Miami, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $930 | $1,500 | $2,000 | 40% |
| Labor | $550 | $2,150 | $3,750 | 57% |
| Permits and fees | $45 | $110 | $170 | 3% |
| Total | $1,550 | $3,700 | $5,900 | 100% |
Why Miami prices look the way they do
We price the labor side from BLS wage data for 2 trades: construction laborers at 60%, carpenters at 40%. Weighted together, Miami wages are 0.92 times the national level. Labor makes up about 57% of the midpoint estimate (60% at national prices).
Materials are scaled with BEA's regional price parity for goods. Miami is at 103.6 against 100 for the US, so a materials line of $1,450 nationally becomes $1,500 here (midpoint, 150 linear ft). Permits follow the all-items index of 114.2: $45 to $170.
Related projects, priced for Miami
Jobs that often go together with chain-link fence are priced below at their usual sizes, using the same Miami wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (+1%) and gravel driveway lowest (−2%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,950 – $7,500 | −2% |
| Vinyl fence | 150 linear ft | $4,600 – $9,200 | +1% |
| Aluminum fence | 150 linear ft | $3,700 – $11,300 | −1% |
| Gravel driveway | 1,000 sq ft | $2,450 – $10,000 | −2% |
Add-ons priced for Miami
Add-ons start from national price ranges and are scaled by 0.98 for Miami, which is the average of the area's wage index (0.92) and goods price index (1.04). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $80 – $980 |
The best months for chain-link fence in Miami
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Miami Beach (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Miami: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Miami gets about 57 inches of precipitation in a normal year. The wettest months are June, August and September (8.4 inches in September). The station averages about 30 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 74 | 61 | 2.3 | Workable |
| Feb | 75 | 63 | 2.3 | Workable |
| Mar | 77 | 65 | 2.5 | Workable |
| Apr | 80 | 70 | 3.4 | Workable |
| May | 83 | 74 | 4.9 | Workable |
| Jun | 86 | 77 | 7.8 | Workable |
| Jul | 88 | 78 | 6.0 | Workable |
| Aug | 88 | 78 | 7.5 | Workable |
| Sep | 87 | 77 | 8.4 | Workable |
| Oct | 84 | 74 | 6.5 | Workable |
| Nov | 79 | 69 | 3.3 | Workable |
| Dec | 76 | 65 | 2.3 | Workable |
Chain-link fence: what moves the price in Miami
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Cost by quality level and size in Miami
The cited range is split into basic, standard and premium bands, then scaled to Miami. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$1,550 to $3,300
4-ft galvanized, front yard
Standard
$2,850 to $4,600
6-ft galvanized backyard fence
Premium
$4,150 to $5,900
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,050 – $2,200 | $1,900 – $3,100 | $2,800 – $4,000 |
| 150 ft (150 linear ft) | $1,550 – $3,300 | $2,850 – $4,600 | $4,150 – $5,900 |
| 200 ft (200 linear ft) | $2,000 – $4,350 | $3,750 – $6,100 | $5,500 – $7,850 |
| full lot (300 linear ft) | $3,000 – $6,450 | $5,600 – $9,050 | $8,200 – $11,700 |
Who does the work: Miami trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Miami the blend is 0.92.
For construction laborers (47-2061, weighted 60%) the local median is $21.88 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.33 and $23.61 an hour. BLS counts 18,280 of them working in the area, 64.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Carpenters (47-2031), 40% of the weighting: a median of $24.79 an hour, 15% below the US median of $29.12. The middle half of them earn between $21.65 and $29.32 an hour. About 10,100 work in the metro. That is 35.8 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $110 to the midpoint estimate; the 25th percentile takes off about $220. That is a swing of roughly 5.9% to 2.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Miami-Fort Lauderdale-West Palm Beach has 2,819,940 jobs in total (BLS, May 2025), ranking 9th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $18.33 | $21.88 | $23.61 | $22.66 | 0.97 | metro |
| Carpenters (47-2031) | 40% | $21.65 | $24.79 | $29.32 | $29.12 | 0.85 | metro |
| Blended | 100% | 0.92 | |||||
How Miami compares
Same job, same size (150 linear ft), priced for the nearest metros. Miami is the priciest of the group. Port St. Lucie is the cheapest at $3,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Miami, FLthis page | $1,550 – $5,900 | $3,700 | |
| Naples, FL55 miles | $1,450 – $5,750 | $3,600 | −4% |
| Port St. Lucie, FL80 miles | $1,450 – $5,550 | $3,500 | −6% |
| Cape Coral, FL100 miles | $1,450 – $5,600 | $3,500 | −6% |
| Punta Gorda, FL110 miles | $1,450 – $5,650 | $3,550 | −4% |
| Sebastian, FL110 miles | $1,450 – $5,650 | $3,550 | −5% |
| Florida (statewide) | $1,450 – $5,650 | $3,550 | −4% |
| United States | $1,550 – $6,150 | $3,850 | +3% |
Out of the 300 metros we cover, Miami ranks #148 for the cost of this job (#1 is the most expensive). Statewide, Miami is 4% above the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tampa, FL | 1,447,120 jobs | $1,450 – $5,650 | $3,550 | −5% |
| Orlando, FL | 1,411,730 jobs | $1,400 – $5,450 | $3,450 | −8% |
| Jacksonville, FL | 765,930 jobs | $1,450 – $5,600 | $3,550 | −5% |
| North Port, FL | 339,940 jobs | $1,450 – $5,750 | $3,600 | −3% |
| Cape Coral, FL | 304,790 jobs | $1,450 – $5,600 | $3,500 | −6% |
| Lakeland, FL | 265,280 jobs | $1,400 – $5,300 | $3,350 | −10% |
Metros of a similar size
Big cities and small ones price differently, so here is Miami against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $1,450 – $5,650 | $3,550 | −5% |
| Boston, MA | 2,703,890 jobs | $1,700 – $7,400 | $4,550 | +22% |
| Philadelphia, PA | 2,897,830 jobs | $1,600 – $6,550 | $4,050 | +9% |
| Phoenix, AZ | 2,375,760 jobs | $1,500 – $6,050 | $3,750 | +1% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,850 to $4,600 for Miami, FL is attached.
Detailed chain-link fence report for Miami, FL, $9
The report lays out the chain-link fence numbers for Miami, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Miami: your questions
+How much does it cost to install a chain-link fence in Miami?
For 150 linear ft, expect $1,550 to $5,900 in the Miami area. A standard-spec job lands at $2,850 to $4,600. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Miami?
About $9.90 to $38.50 per linear ft for materials and labor, plus $45 to $170 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Miami or Naples?
Naples is 55 miles away. The midpoint for 150 linear ft there is $3,600, which is 4% less than Miami ($3,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Miami?
About 57% at the midpoint, or $2,150 out of $3,700. Materials are 40% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Miami?
$2,000 to $7,850. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Miami?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $170 for fees in the Miami area (our national range of $40 to $150 scaled by the local price level).
+Is Miami expensive for chain-link fence compared with the rest of Florida?
Miami is 4% above the Florida statewide estimate ($3,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do construction laborers earn in Miami?
The BLS median is $21.88 an hour in the Miami area, compared with $22.66 nationally. The 25th to 75th percentile range is $18.33 to $23.61.
+What do basic and premium chain-link fence work cost in Miami?
For 150 linear ft, basic work runs $1,550 to $3,300 and premium work $4,150 to $5,900. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+Is there a bad season to install a chain-link fence in Miami?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Miami?
$80 to $980, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Miami
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).