Chain-link fence cost in Phoenix, AZ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,500 – $6,050
- Per linear ft
- $9.70 – $39
- before permit
- Versus US midpoint
- −2%
- US $3,850
- Rank of 300 metros
- #137
- 1 = most expensive
Phoenix homeowners pay roughly $1,500 to $6,050 to install a chain-link fence at 150 linear ft, or $9.70 to $39 per linear ft (permit not included). Against the US midpoint, Phoenix is almost level. Building materials run about 5% below the US average here (BEA goods price index 95.0).
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Phoenix, AZ, standard level
$2,850 to $4,700
About $18.50 to $30.50 per linear ft before permits. Labor is about 61% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,650 | $3,000 |
| Permits and fees | $75 | $120 |
| Total | $2,850 | $4,700 |
Cost breakdown for 150 linear ft in Phoenix, AZ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $860 | $1,350 | $1,850 | 36% |
| Labor | $600 | $2,300 | $4,050 | 61% |
| Permits and fees | $40 | $100 | $150 | 3% |
| Total | $1,500 | $3,750 | $6,050 | 100% |
Where the Phoenix price comes from
The wage side of the estimate leans on construction laborers, who do 60% of the hours on a typical job. Their local median is $22.56 an hour. Add the other trades involved and the blended wage index for Phoenix is 1.00 (US = 1.00), which puts labor at 61% of the total.
On the materials line, the BEA goods price index for the Phoenix metro is 95.0 (US = 100). The midpoint materials bill for 150 linear ft comes to $1,350, compared with $1,450 at national prices. Permit and inspection fees are scaled by the broader index (103.3) and land at $40 to $150.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Phoenix is 1.00 times the national level.
Construction laborers (47-2061), 60% of the weighting: a median of $22.56 an hour, in line with the US median of $22.66. The middle half of them earn between $19.79 and $24.90 an hour. About 29,230 work in the metro. That is 123.0 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For carpenters (47-2031, weighted 40%) the local median is $29.00 an hour, which is in line with the national $29.12. The middle half of them earn between $23.36 and $35.30 an hour. BLS counts 12,710 of them working in the area, 53.5 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($24.90 an hour) instead of the median, the labor line grows by about $140. At the 25th percentile ($19.79) it shrinks by about $170. The total moves by 3.8% or 4.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 2,375,760 jobs in the Phoenix-Mesa-Chandler area. That makes it the 11th largest of the 300 metros we cover, with 1.53% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $19.79 | $22.56 | $24.90 | $22.66 | 1.00 | metro |
| Carpenters (47-2031) | 40% | $23.36 | $29.00 | $35.30 | $29.12 | 1.00 | metro |
| Blended | 100% | 1.00 | |||||
Planning more than one job in Phoenix?
Because every project leans on different trades, Phoenix's wage level does not move all prices equally. Against the US midpoint, gravel driveway runs −1% and aluminum fence −4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,950 – $7,400 | −3% |
| Vinyl fence | 150 linear ft | $4,350 – $8,800 | −4% |
| Aluminum fence | 150 linear ft | $3,600 – $10,900 | −4% |
| Gravel driveway | 1,000 sq ft | $2,450 – $10,100 | −1% |
Is Phoenix cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. El Centro is the priciest of the group at $4,300. Yuma is the cheapest at $3,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Phoenix, AZthis page | $1,500 – $6,050 | $3,750 | |
| Tucson, AZ75 miles | $1,450 – $5,650 | $3,550 | −6% |
| Prescott Valley, AZ105 miles | $1,500 – $5,900 | $3,700 | −2% |
| Yuma, AZ110 miles | $1,400 – $5,550 | $3,500 | −8% |
| Flagstaff, AZ185 miles | $1,500 – $5,900 | $3,700 | −2% |
| El Centro, CA190 miles | $1,700 – $6,950 | $4,300 | +15% |
| Arizona (statewide) | $1,500 – $6,000 | $3,750 | −1% |
| United States | $1,550 – $6,150 | $3,850 | +2% |
Across 300 US metros, Phoenix comes in at #137 from the top. The priciest is Honolulu, HI at $5,450; the cheapest is Brownsville, TX at $3,000 (midpoints, 150 linear ft). Statewide, Phoenix is 1% above the Arizona figure.
Other Arizona metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tucson, AZ | 389,630 jobs | $1,450 – $5,650 | $3,550 | −6% |
| Prescott Valley, AZ | 72,300 jobs | $1,500 – $5,900 | $3,700 | −2% |
| Yuma, AZ | 68,880 jobs | $1,400 – $5,550 | $3,500 | −8% |
| Flagstaff, AZ | 66,610 jobs | $1,500 – $5,900 | $3,700 | −2% |
| Lake Havasu City, AZ | 56,490 jobs | $1,400 – $5,500 | $3,450 | −8% |
Cities with a workforce like Phoenix's
Big cities and small ones price differently, so here is Phoenix against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Boston, MA | 2,703,890 jobs | $1,700 – $7,400 | $4,550 | +21% |
| San Francisco, CA | 2,373,920 jobs | $1,950 – $8,400 | $5,150 | +37% |
| Miami, FL | 2,819,940 jobs | $1,550 – $5,900 | $3,700 | −1% |
| Seattle, WA | 2,086,210 jobs | $1,750 – $7,300 | $4,550 | +20% |
Optional extras in Phoenix
Extras are quoted nationally and then scaled to Phoenix by the average of the local wage index (1.00) and goods index (0.95), a factor of 0.97. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $80 – $970 |
Why two Phoenix quotes can differ
Coating
Black or green vinyl-coated mesh costs more than galvanized.
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
When to schedule chain-link fence in Phoenix
We use NOAA's 1991-2020 climate normals for Phoenix Deer Valley Muni Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
October through April is the stretch where exterior installation runs into the fewest weather problems in Phoenix (7 of 12 months). May, June, July, August and September have an average daytime high of 90°F or more.
Phoenix gets about 9 inches of precipitation in a normal year. The wettest months are January, February and March (1.2 inches in February). Inside the workable window, April and October are the driest, at 0.3 and 0.7 inches. The station averages about 159 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 65 | 44 | 1.2 | Workable |
| Feb | 68 | 46 | 1.2 | Workable |
| Mar | 75 | 51 | 1.1 | Workable |
| Apr | 83 | 57 | 0.3 | Workable |
| May | 92 | 65 | 0.2 | Hot |
| Jun | 102 | 73 | 0.0 | Hot |
| Jul | 104 | 81 | 0.8 | Hot |
| Aug | 103 | 81 | 1.0 | Hot |
| Sep | 98 | 75 | 0.7 | Hot |
| Oct | 86 | 63 | 0.7 | Workable |
| Nov | 74 | 51 | 0.9 | Workable |
| Dec | 64 | 43 | 0.8 | Workable |
Pick a size, pick a tier: chain-link fence pricing in Phoenix
Three bands are cut from the same cited range and localized for Phoenix wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$1,500 to $3,300
4-ft galvanized, front yard
Standard
$2,850 to $4,700
6-ft galvanized backyard fence
Premium
$4,200 to $6,050
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,000 – $2,250 | $1,950 – $3,150 | $2,850 – $4,100 |
| 150 ft (150 linear ft) | $1,500 – $3,300 | $2,850 – $4,700 | $4,200 – $6,050 |
| 200 ft (200 linear ft) | $2,000 – $4,400 | $3,800 – $6,200 | $5,600 – $8,000 |
| full lot (300 linear ft) | $2,950 – $6,550 | $5,650 – $9,250 | $8,350 – $11,900 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,850 to $4,700 for Phoenix, AZ is attached.
Detailed chain-link fence report for Phoenix, AZ, $9
The report lays out the chain-link fence numbers for Phoenix, AZ line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Phoenix: your questions
+How much does it cost to install a chain-link fence in Phoenix?
For 150 linear ft, expect $1,500 to $6,050 in the Phoenix area. A standard-spec job lands at $2,850 to $4,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Phoenix?
About $9.70 to $39 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Phoenix or Tucson?
Tucson is 75 miles away. The midpoint for 150 linear ft there is $3,550, which is 6% less than Phoenix ($3,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Phoenix?
About 61% at the midpoint, or $2,300 out of $3,750. Materials are 36% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Phoenix?
$2,000 to $8,000. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Phoenix?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Phoenix area (our national range of $40 to $150 scaled by the local price level).
+Is Phoenix expensive for chain-link fence compared with the rest of Arizona?
Phoenix is 1% above the Arizona statewide estimate ($3,750 at the midpoint). We cover 6 metros in Arizona; see the state page to compare them.
+What do construction laborers earn in Phoenix?
The BLS median is $22.56 an hour in the Phoenix area, compared with $22.66 nationally. The 25th to 75th percentile range is $19.79 to $24.90.
+What do basic and premium chain-link fence work cost in Phoenix?
For 150 linear ft, basic work runs $1,500 to $3,300 and premium work $4,200 to $6,050. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Phoenix?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Phoenix?
$80 to $970, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Phoenix
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).