Vinyl fence cost in Florida
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (150 linear ft)
- $4,400 – $8,750
- Per linear ft
- $29 – $57.50
- before permit
- Versus US midpoint
- −4%
- US $6,850
- Metros covered
- 19
What does it cost to install a vinyl fence in Florida? Plan on $4,400 to $8,750 for 150 linear ft. Wages (0.88x the US blend), materials (price index 98.1) and permit costs (103.4) put the state below the national midpoint by 4%.
Inside Florida, the metros we cover range from $6,350 (Ocala) to $6,900 (Miami) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Florida (statewide), standard level
$5,700 to $7,450
About $37.50 to $49 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,550 | $5,750 |
| Labor | $1,050 | $1,600 |
| Permits and fees | $75 | $120 |
| Total | $5,700 | $7,450 |
Cost breakdown for 150 linear ft in Florida
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,700 | $5,150 | $6,600 | 78% |
| Labor | $660 | $1,300 | $2,000 | 20% |
| Permits and fees | $40 | $100 | $160 | 1% |
| Total | $4,400 | $6,550 | $8,750 | 100% |
Optional extras in Florida
Extras are quoted nationally and then scaled to Florida by the average of the local wage index (0.88) and goods index (0.98), a factor of 0.93. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $730 |
| Remove old fence | $1,400 – $2,800 |
Florida versus the states around it
Florida ranks 31 of 51 (the 50 states plus DC) for vinyl fence, where 1 is the most expensive. The costliest is Hawaii at $8,250 and the cheapest Arkansas at $6,200, both for 150 linear ft at the midpoint. Florida sits at $6,550. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Georgia | 420 miles away | $4,350 – $8,650 | $6,500 | −1% |
| South Carolina | 430 miles away | $4,300 – $8,600 | $6,450 | −2% |
| Alabama | 480 miles away | $4,250 – $8,400 | $6,350 | −4% |
| North Carolina | 540 miles away | $4,300 – $8,650 | $6,500 | −1% |
| Mississippi | 550 miles away | $4,250 – $8,450 | $6,350 | −3% |
Quality levels and sizes in Florida
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Florida wages and prices. The grid prices the same bands at 4 common sizes.
Basic
$4,400 to $6,150
4-ft picket or ranch rail
Standard
$5,700 to $7,450
6-ft privacy fence, standard white
Premium
$7,000 to $8,750
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,950 – $4,100 | $3,800 – $5,000 | $4,700 – $5,900 |
| 150 ft (150 linear ft) | $4,400 – $6,150 | $5,700 – $7,450 | $7,000 – $8,750 |
| 200 ft (200 linear ft) | $5,800 – $8,150 | $7,550 – $9,900 | $9,300 – $11,600 |
| full lot (300 linear ft) | $8,700 – $12,200 | $11,300 – $14,800 | $13,900 – $17,300 |
What carpenters and the other trades earn in Florida
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 2 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.88 for Florida.
For carpenters (47-2031, weighted 50%) the local median is $23.98 an hour, which is 18% below the national $29.12. The middle half of them earn between $21.41 and $28.79 an hour. BLS counts 39,300 of them working in the state, 39.6 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 50% of the weighting: a median of $21.17 an hour, 7% below the US median of $22.66. The middle half of them earn between $17.83 and $23.06 an hour. About 87,040 work in the state. That is 87.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
A crew paid at the 75th percentile for carpenters ($28.79 an hour) would add about $120 to the statewide midpoint; one at the 25th percentile ($21.41) would take off about $65. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 9,929,860 jobs across Florida (May 2025), which is 6.4% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.41 | $23.98 | $28.79 | $29.12 | 0.82 | state |
| Construction laborers (47-2061) | 50% | $17.83 | $21.17 | $23.06 | $22.66 | 0.93 | state |
| Blended | 100% | 0.88 | |||||
Which Florida city is cheapest for vinyl fence?
1 of the 19 metros sit above the statewide midpoint of $6,550, and the top-to-bottom gap is 9%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (150 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Miami, FL | $4,600 – $9,200 | $6,900 | +5% |
| North Port, FL | $4,350 – $8,700 | $6,500 | −1% |
| Naples, FL | $4,300 – $8,650 | $6,500 | −1% |
| Punta Gorda, FL | $4,300 – $8,650 | $6,450 | −1% |
| Crestview, FL | $4,300 – $8,650 | $6,450 | −1% |
| Jacksonville, FL | $4,300 – $8,600 | $6,450 | −2% |
| Sebastian, FL | $4,300 – $8,600 | $6,450 | −2% |
| Palm Bay, FL | $4,300 – $8,600 | $6,450 | −2% |
| Tampa, FL | $4,300 – $8,600 | $6,450 | −2% |
| Cape Coral, FL | $4,300 – $8,600 | $6,450 | −2% |
| Panama City, FL | $4,300 – $8,600 | $6,450 | −2% |
| Port St. Lucie, FL | $4,300 – $8,550 | $6,450 | −2% |
| Pensacola, FL | $4,300 – $8,550 | $6,400 | −2% |
| Deltona, FL | $4,300 – $8,550 | $6,400 | −2% |
| Orlando, FL | $4,300 – $8,550 | $6,400 | −2% |
| Gainesville, FL | $4,300 – $8,550 | $6,400 | −2% |
| Lakeland, FL | $4,250 – $8,450 | $6,350 | −3% |
| Tallahassee, FL | $4,250 – $8,450 | $6,350 | −3% |
| Ocala, FL | $4,250 – $8,400 | $6,350 | −4% |
Vinyl fence: what moves the price in Florida
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Florida seasons and vinyl fence
Season matters for vinyl fence. For each Florida metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.
Miami has the longest comfortable season of the metros we cover in Florida at 12 months; Punta Gorda has the shortest at 7 (October through April). Rainfall runs from 46 inches a year in Lakeland to 68 inches in Pensacola.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Miami | 61 | 88 | 57 | 12: all year |
| Tampa | 53 | 91 | 49 | 8: October through May |
| Orlando | 50 | 92 | 51 | 8: October through May |
| Jacksonville | 47 | 92 | 48 | 9: September through May |
| North Port | 51 | 93 | 53 | 7: October through April |
| Cape Coral | 54 | 92 | 57 | 7: October through April |
| Lakeland | 52 | 93 | 46 | 7: October through April |
| Palm Bay | 49 | 91 | 56 | 9: September through May |
| Deltona | 50 | 93 | 50 | 8: October through May |
| Pensacola | 44 | 92 | 68 | 9: September through May |
| Tallahassee | 41 | 92 | 59 | 9: September through May |
| Naples | 56 | 91 | 50 | 8: October through May |
| Port St. Lucie | 51 | 90 | 51 | 10: September through June |
| Gainesville | 43 | 91 | 48 | 9: September through May |
| Crestview | 39 | 92 | 64 | 9: September through May |
| Ocala | 46 | 92 | 52 | 8: October through May |
| Panama City | 43 | 91 | 61 | 10: September through June |
| Sebastian | 52 | 91 | 53 | 10: September through June |
| Punta Gorda | 51 | 93 | 53 | 7: October through April |
Related projects, priced for Florida
The table prices neighboring jobs at their usual sizes using statewide Florida wages and prices. Against national midpoints, aluminum fence comes out highest (−6%) and chain-link fence lowest (−7%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,150 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −7% |
| Aluminum fence | 150 linear ft | $3,550 – $10,700 | −6% |
| Concrete slab | 400 sq ft | $2,250 – $4,900 | −6% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,700 to $7,450 for Florida is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Florida: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Florida: your questions
+How much does it cost to install a vinyl fence in Florida?
$4,400 to $8,750 for 150 linear ft, using statewide wages and prices. Metro areas inside Florida can sit above or below that.
+Which city in Florida is cheapest for vinyl fence?
Ocala at about $6,350 (midpoint, 150 linear ft). The priciest is Miami at $6,900.
+Is vinyl fence cheaper in Florida than the US average?
It is 4% cheaper: $6,550 against $6,850 for 150 linear ft at the midpoint.
+What share of the price is labor in Florida?
About 20% ($1,300). Materials are 78%. Statewide labor for this job is weighted 0.88x the national wage level.
+What do carpenters earn in Florida?
The BLS statewide median is $23.98 an hour, against $29.12 for the US. The 25th to 75th percentile range is $21.41 to $28.79.
+Where does Florida rank for vinyl fence costs?
31st most expensive of 51 (the 50 states plus DC) at the midpoint, $6,550 for 150 linear ft. Rank 1 is the costliest.
+What do basic and premium vinyl fence work cost in Florida?
For 150 linear ft, basic work runs $4,400 to $6,150 and premium work $7,000 to $8,750. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Does the season matter for vinyl fence in Florida?
Yes where winters or summers are hard. Of the Florida metros we cover, Miami has the most comfortable months (12 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add one gate" add in Florida?
$140 to $730, from a national range scaled by the statewide wage and goods indexes.
Vinyl fence by city in Florida
- Miami, FL$6,900 midpoint
- North Port, FL$6,500 midpoint
- Naples, FL$6,500 midpoint
- Punta Gorda, FL$6,450 midpoint
- Crestview, FL$6,450 midpoint
- Jacksonville, FL$6,450 midpoint
- Sebastian, FL$6,450 midpoint
- Palm Bay, FL$6,450 midpoint
- Tampa, FL$6,450 midpoint
- Cape Coral, FL$6,450 midpoint
- Panama City, FL$6,450 midpoint
- Port St. Lucie, FL$6,450 midpoint
- Pensacola, FL$6,400 midpoint
- Deltona, FL$6,400 midpoint
- Orlando, FL$6,400 midpoint
- Gainesville, FL$6,400 midpoint
- Lakeland, FL$6,350 midpoint
- Tallahassee, FL$6,350 midpoint
- Ocala, FL$6,350 midpoint
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.