Vinyl fence cost in Palm Bay, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,600
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #207
- 1 = most expensive
Local price for a vinyl fence in the Palm Bay area: $4,300 to $8,600 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Palm Bay, FL, standard level
$5,600 to $7,300
About $37 to $48 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,050 | $1,550 |
| Permits and fees | $75 | $120 |
| Total | $5,600 | $7,300 |
Cost breakdown for 150 linear ft in Palm Bay, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 78% |
| Labor | $650 | $1,300 | $1,950 | 20% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,300 | $6,450 | $8,600 | 100% |
Why Palm Bay prices look the way they do
Labor is 20% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Palm Bay the blended ratio comes out at 0.87.
Materials are scaled with BEA's regional price parity for goods. Palm Bay is at 96.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.0: $40 to $150.
Add-ons priced for Palm Bay
Add-ons start from national price ranges and are scaled by 0.92 for Palm Bay, which is the average of the area's wage index (0.87) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $710 |
| Remove old fence | $1,350 – $2,750 |
Palm Bay: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Palm Bay. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,600 to $7,300
6-ft privacy fence, standard white
Premium
$6,900 to $8,600
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,050 | $3,750 – $4,900 | $4,600 – $5,800 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,600 – $7,300 | $6,900 – $8,600 |
| 200 ft (200 linear ft) | $5,700 – $8,000 | $7,450 – $9,700 | $9,150 – $11,400 |
| full lot (300 linear ft) | $8,550 – $12,000 | $11,100 – $14,500 | $13,700 – $17,100 |
The best months for vinyl fence in Palm Bay
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Palm Bay (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Palm Bay are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Palm Bay gets about 56 inches of precipitation in a normal year. The wettest months are June, August and September (8.0 inches in September). Inside the workable window, February and December are the driest, at 2.4 and 2.5 inches. The station averages about 102 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 73 | 49 | 2.6 | Workable |
| Feb | 75 | 52 | 2.4 | Workable |
| Mar | 79 | 55 | 3.0 | Workable |
| Apr | 83 | 60 | 2.8 | Workable |
| May | 87 | 65 | 4.4 | Workable |
| Jun | 90 | 71 | 7.6 | Hot |
| Jul | 91 | 73 | 6.6 | Hot |
| Aug | 92 | 73 | 7.1 | Hot |
| Sep | 89 | 72 | 8.0 | Workable |
| Oct | 85 | 67 | 5.6 | Workable |
| Nov | 79 | 59 | 3.0 | Workable |
| Dec | 75 | 52 | 2.5 | Workable |
Specs and site conditions that change a Palm Bay bid
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Planning more than one job in Palm Bay?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Palm Bay wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−7%) and chain-link fence lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,050 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,600 | −8% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
Palm Bay against nearby metros and the rest of Florida
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,350 to $6,450 across Palm Bay and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Palm Bay, FLthis page | $4,300 – $8,600 | $6,450 | |
| Orlando, FL40 miles | $4,300 – $8,550 | $6,400 | −1% |
| Sebastian, FL40 miles | $4,300 – $8,600 | $6,450 | level |
| Lakeland, FL65 miles | $4,250 – $8,450 | $6,350 | −2% |
| Deltona, FL70 miles | $4,300 – $8,550 | $6,400 | level |
| Port St. Lucie, FL75 miles | $4,300 – $8,550 | $6,450 | level |
| Florida (statewide) | $4,400 – $8,750 | $6,550 | +2% |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Out of the 300 metros we cover, Palm Bay ranks #207 for the cost of this job (#1 is the most expensive). Statewide, Palm Bay is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $4,600 – $9,200 | $6,900 | +7% |
| Tampa, FL | 1,447,120 jobs | $4,300 – $8,600 | $6,450 | level |
| Orlando, FL | 1,411,730 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Jacksonville, FL | 765,930 jobs | $4,300 – $8,600 | $6,450 | level |
| North Port, FL | 339,940 jobs | $4,350 – $8,700 | $6,500 | +1% |
| Cape Coral, FL | 304,790 jobs | $4,300 – $8,600 | $6,450 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Palm Bay against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lancaster, PA | 252,230 jobs | $4,550 – $9,150 | $6,850 | +6% |
| Trenton, NJ | 240,190 jobs | $4,750 – $9,850 | $7,300 | +13% |
| Scranton, PA | 255,620 jobs | $4,550 – $9,200 | $6,900 | +7% |
| Augusta, GA | 231,930 jobs | $4,300 – $8,650 | $6,500 | +1% |
Who does the work: Palm Bay trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Palm Bay the blend is 0.87.
Carpenters (47-2031), 50% of the weighting: a median of $22.97 an hour, 21% below the US median of $29.12. The middle half of them earn between $19.09 and $27.83 an hour. About 680 work in the metro. That is 27.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $21.50 an hour, which is 5% below the national $22.66. The middle half of them earn between $17.96 and $23.16 an hour. BLS counts 1,870 of them working in the area, 76.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $130 to the midpoint estimate; the 25th percentile takes off about $100. That is a swing of roughly 1.5% to 1.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Palm Bay-Melbourne-Titusville has 245,170 jobs in total (BLS, May 2025), ranking 104th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $19.09 | $22.97 | $27.83 | $29.12 | 0.79 | metro |
| Construction laborers (47-2061) | 50% | $17.96 | $21.50 | $23.16 | $22.66 | 0.95 | metro |
| Blended | 100% | 0.87 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,300 for Palm Bay, FL is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Palm Bay, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Palm Bay: your questions
+How much does it cost to install a vinyl fence in Palm Bay?
For 150 linear ft, expect $4,300 to $8,600 in the Palm Bay area. A standard-spec job lands at $5,600 to $7,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Palm Bay?
About $28.50 to $56.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Palm Bay or Orlando?
Orlando is 40 miles away. The midpoint for 150 linear ft there is $6,400, which is 1% less than Palm Bay ($6,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Palm Bay?
About 20% at the midpoint, or $1,300 out of $6,450. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Palm Bay?
$5,700 to $11,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Palm Bay?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Palm Bay area (our national range of $40 to $150 scaled by the local price level).
+Is Palm Bay expensive for vinyl fence compared with the rest of Florida?
Palm Bay is 2% below the Florida statewide estimate ($6,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Palm Bay?
The BLS median is $22.97 an hour in the Palm Bay area, compared with $29.12 nationally. The 25th to 75th percentile range is $19.09 to $27.83.
+What do basic and premium vinyl fence work cost in Palm Bay?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,900 to $8,600. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Palm Bay?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Palm Bay?
$140 to $710, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Palm Bay
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.