Vinyl fence cost in Trenton, NJ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,750 – $9,850
- Per linear ft
- $31.50 – $64.50
- before permit
- Versus US midpoint
- +7%
- US $6,850
- Rank of 300 metros
- #32
- 1 = most expensive
If you want to install a vinyl fence in Trenton, plan on $4,750 to $9,850 for 150 linear ft, all in. Per linear ft, that is $31.50 to $64.50 for materials and labor, with the permit on top. The local midpoint runs 7% higher than the national one. Carpenters earn a median of $31.58 an hour in the Trenton area, 8% above the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Trenton, NJ, standard level
$6,300 to $8,300
About $41.50 to $54.50 per linear ft before permits. Labor is about 27% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,650 | $5,850 |
| Labor | $1,550 | $2,350 |
| Permits and fees | $75 | $120 |
| Total | $6,300 | $8,300 |
Cost breakdown for 150 linear ft in Trenton, NJ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,750 | $5,250 | $6,750 | 72% |
| Labor | $980 | $1,950 | $2,950 | 27% |
| Permits and fees | $40 | $100 | $150 | 1% |
| Total | $4,750 | $7,300 | $9,850 | 100% |
What is behind the Trenton number
Labor is 27% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Trenton the blended ratio comes out at 1.31.
On the materials line, the BEA goods price index for the Trenton metro is 99.8 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,250, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (103.2) and land at $40 to $150.
Planning more than one job in Trenton?
Because every project leans on different trades, Trenton's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +21% and wood fence +11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,450 – $8,450 | +11% |
| Chain-link fence | 150 linear ft | $1,750 – $7,550 | +21% |
| Aluminum fence | 150 linear ft | $4,300 – $12,700 | +12% |
| Concrete slab | 400 sq ft | $2,800 – $5,850 | +13% |
Trenton labor market for vinyl fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Trenton is 1.31 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $31.58 an hour, which is 8% above the national $29.12. The middle half of them earn between $25.60 and $51.38 an hour. BLS counts 610 of them working in the area, 25.4 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $34.58 an hour, 53% above the US median of $22.66. The middle half of them earn between $23.43 and $51.14 an hour. About 960 work in the metro. That is 40.0 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($51.38 an hour) instead of the median, the labor line grows by about $510. At the 25th percentile ($25.60) it shrinks by about $150. The total moves by 7.0% or 2.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 240,190 jobs in the Trenton-Princeton area. That makes it the 105th largest of the 300 metros we cover, with 0.15% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $25.60 | $31.58 | $51.38 | $29.12 | 1.08 | metro |
| Construction laborers (47-2061) | 50% | $23.43 | $34.58 | $51.14 | $22.66 | 1.53 | metro |
| Blended | 100% | 1.31 | |||||
Cost by quality level and size in Trenton
Three bands are cut from the same cited range and localized for Trenton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,750 to $6,800
4-ft picket or ranch rail
Standard
$6,300 to $8,300
6-ft privacy fence, standard white
Premium
$7,800 to $9,850
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,200 – $4,550 | $4,200 – $5,600 | $5,250 – $6,600 |
| 150 ft (150 linear ft) | $4,750 – $6,800 | $6,300 – $8,300 | $7,800 – $9,850 |
| 200 ft (200 linear ft) | $6,350 – $9,000 | $8,350 – $11,000 | $10,400 – $13,100 |
| full lot (300 linear ft) | $9,500 – $13,500 | $12,500 – $16,500 | $15,500 – $19,500 |
Trenton against nearby metros and the rest of New Jersey
Same job, same size (150 linear ft), priced for the nearest metros. New York is the priciest of the group at $7,800. Philadelphia is the cheapest at $6,800.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Trenton, NJthis page | $4,750 – $9,850 | $7,300 | |
| Philadelphia, PA40 miles | $4,500 – $9,150 | $6,800 | −6% |
| Allentown, PA50 miles | $4,550 – $9,200 | $6,900 | −5% |
| New York, NY55 miles | $5,150 – $10,500 | $7,800 | +7% |
| Reading, PA65 miles | $4,550 – $9,150 | $6,850 | −6% |
| Atlantic City, NJ70 miles | $4,600 – $9,350 | $6,950 | −5% |
| New Jersey (statewide) | $4,950 – $10,100 | $7,550 | +3% |
| United States | $4,550 – $9,150 | $6,850 | −6% |
Across 300 US metros, Trenton comes in at #32 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Trenton is 3% below the New Jersey figure.
Other New Jersey metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlantic City, NJ | 168,700 jobs | $4,600 – $9,350 | $6,950 | −5% |
| Vineland, NJ | 62,300 jobs | $4,850 – $10,100 | $7,450 | +2% |
Cities with a workforce like Trenton's
Big cities and small ones price differently, so here is Trenton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Palm Bay, FL | 245,170 jobs | $4,300 – $8,600 | $6,450 | −12% |
| Augusta, GA | 231,930 jobs | $4,300 – $8,650 | $6,500 | −11% |
| Lancaster, PA | 252,230 jobs | $4,550 – $9,150 | $6,850 | −6% |
| Fort Wayne, IN | 225,520 jobs | $4,350 – $8,750 | $6,550 | −10% |
Optional extras in Trenton
Extras are quoted nationally and then scaled to Trenton by the average of the local wage index (1.31) and goods index (1.00), a factor of 1.15. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $170 – $900 |
| Remove old fence | $1,750 – $3,450 |
Climate in Trenton: timing your vinyl fence job
We use NOAA's 1991-2020 climate normals for Trenton Mercer Co Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Trenton (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Trenton gets about 46 inches of precipitation in a normal year, including roughly 27 inches of snow. The wettest months are June, July and August (4.4 inches in July). Inside the workable window, April and November are the driest, at 3.6 and 3.2 inches. The station averages about 22 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 24 | 3.3 | Cold |
| Feb | 43 | 26 | 2.6 | Cold |
| Mar | 51 | 33 | 4.0 | Workable |
| Apr | 63 | 42 | 3.6 | Workable |
| May | 72 | 52 | 4.0 | Workable |
| Jun | 81 | 61 | 4.3 | Workable |
| Jul | 86 | 67 | 4.4 | Workable |
| Aug | 84 | 65 | 4.2 | Workable |
| Sep | 77 | 58 | 4.0 | Workable |
| Oct | 66 | 46 | 3.8 | Workable |
| Nov | 55 | 36 | 3.2 | Workable |
| Dec | 44 | 29 | 4.0 | Cold |
Specs and site conditions that change a Trenton bid
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,300 to $8,300 for Trenton, NJ is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Trenton, NJ line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Trenton: your questions
+How much does it cost to install a vinyl fence in Trenton?
For 150 linear ft, expect $4,750 to $9,850 in the Trenton area. A standard-spec job lands at $6,300 to $8,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Trenton?
About $31.50 to $64.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Trenton or Philadelphia?
Philadelphia is 40 miles away. The midpoint for 150 linear ft there is $6,800, which is 6% less than Trenton ($7,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Trenton?
About 27% at the midpoint, or $1,950 out of $7,300. Materials are 72% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Trenton?
$6,350 to $13,100. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Trenton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Trenton area (our national range of $40 to $150 scaled by the local price level).
+Is Trenton expensive for vinyl fence compared with the rest of New Jersey?
Trenton is 3% below the New Jersey statewide estimate ($7,550 at the midpoint). We cover 3 metros in New Jersey; see the state page to compare them.
+What do carpenters earn in Trenton?
The BLS median is $31.58 an hour in the Trenton area, compared with $29.12 nationally. The 25th to 75th percentile range is $25.60 to $51.38.
+What do basic and premium vinyl fence work cost in Trenton?
For 150 linear ft, basic work runs $4,750 to $6,800 and premium work $7,800 to $9,850. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Trenton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. April and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Trenton?
$170 to $900, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Trenton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.