Aluminum fence cost in Trenton, NJ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $12,700
- Per linear ft
- $28.50 – $83.50
- before permit
- Versus US midpoint
- +12%
- US $7,600
- Rank of 300 metros
- #19
- 1 = most expensive
If you want to install an aluminum fence in Trenton, plan on $4,300 to $12,700 for 150 linear ft, all in. Per linear ft, that is $28.50 to $83.50 for materials and labor, with the permit on top. The local midpoint runs 12% higher than the national one. Carpenters earn a median of $31.58 an hour in the Trenton area, 8% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Trenton, NJ, standard level
$6,800 to $10,200
About $45 to $67 per linear ft before permits. Labor is about 42% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,800 | $5,900 |
| Labor | $2,900 | $4,150 |
| Permits and fees | $75 | $120 |
| Total | $6,800 | $10,200 |
Cost breakdown for 150 linear ft in Trenton, NJ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,250 | $4,850 | $7,500 | 57% |
| Labor | $2,000 | $3,550 | $5,050 | 42% |
| Permits and fees | $40 | $100 | $150 | 1% |
| Total | $4,300 | $8,500 | $12,700 | 100% |
What is behind the Trenton number
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Trenton wages are 1.34 times the national level. Labor makes up about 42% of the midpoint estimate (35% at national prices).
On the materials line, the BEA goods price index for the Trenton metro is 99.8 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,850, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (103.2) and land at $40 to $150.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Trenton. The wage table below marks each row.
Planning more than one job in Trenton?
Because every project leans on different trades, Trenton's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +21% and vinyl fence +7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,750 – $9,850 | +7% |
| Wood fence | 150 linear ft | $3,450 – $8,450 | +11% |
| Chain-link fence | 150 linear ft | $1,750 – $7,550 | +21% |
| Inground pool | 450 sq ft | $42,300 – $132,000 | +17% |
Why two Trenton quotes can differ
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Optional extras in Trenton
Extras are quoted nationally and then scaled to Trenton by the average of the local wage index (1.34) and goods index (1.00), a factor of 1.17. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $230 – $1,050 |
Pick a size, pick a tier: aluminum fence pricing in Trenton
Three bands are cut from the same cited range and localized for Trenton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$4,300 to $7,650
Standard picket or ornamental, 4 ft
Standard
$6,800 to $10,200
Ornamental pool-code fence, 4-5 ft
Premium
$9,350 to $12,700
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,900 – $5,150 | $4,550 – $6,800 | $6,250 – $8,500 |
| 150 ft (150 linear ft) | $4,300 – $7,650 | $6,800 – $10,200 | $9,350 – $12,700 |
| 200 ft (200 linear ft) | $5,700 – $10,200 | $9,050 – $13,500 | $12,400 – $16,900 |
Trenton labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Trenton is 1.34 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $31.58 an hour, which is 8% above the national $29.12. The middle half of them earn between $25.60 and $51.38 an hour. BLS counts 610 of them working in the area, 25.4 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $34.58 an hour, 53% above the US median of $22.66. The middle half of them earn between $23.43 and $51.14 an hour. About 960 work in the metro. That is 40.0 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Trenton metro, so we used the New Jersey statewide median: $44.64 an hour against $29.71 for the US. The middle half of them earn between $28.07 and $57.63 an hour.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($51.38 an hour) instead of the median, the labor line grows by about $710. At the 25th percentile ($25.60) it shrinks by about $220. The total moves by 8.4% or 2.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 240,190 jobs in the Trenton-Princeton area. That makes it the 105th largest of the 300 metros we cover, with 0.15% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $25.60 | $31.58 | $51.38 | $29.12 | 1.08 | metro |
| Construction laborers (47-2061) | 40% | $23.43 | $34.58 | $51.14 | $22.66 | 1.53 | metro |
| Sheet metal workers (47-2211) | 20% | $28.07 | $44.64 | $57.63 | $29.71 | 1.50 | state |
| Blended | 100% | 1.34 | |||||
Is Trenton cheap or dear? The local comparison
Of the five closest metros, 4 are cheaper than Trenton. Reading is the lowest at about $7,600 (midpoint, 150 linear ft), 65 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Trenton, NJthis page | $4,300 – $12,700 | $8,500 | |
| Philadelphia, PA40 miles | $3,900 – $11,600 | $7,750 | −8% |
| Allentown, PA50 miles | $3,850 – $11,500 | $7,700 | −10% |
| New York, NY55 miles | $4,400 – $13,200 | $8,800 | +3% |
| Reading, PA65 miles | $3,800 – $11,400 | $7,600 | −10% |
| Atlantic City, NJ70 miles | $4,100 – $12,100 | $8,100 | −5% |
| New Jersey (statewide) | $4,350 – $12,900 | $8,650 | +2% |
| United States | $3,800 – $11,400 | $7,600 | −11% |
Across 300 US metros, Trenton comes in at #19 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Trenton is 2% below the New Jersey figure.
Other New Jersey metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlantic City, NJ | 168,700 jobs | $4,100 – $12,100 | $8,100 | −5% |
| Vineland, NJ | 62,300 jobs | $4,450 – $13,000 | $8,700 | +3% |
Cities with a workforce like Trenton's
Big cities and small ones price differently, so here is Trenton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Palm Bay, FL | 245,170 jobs | $3,500 – $10,600 | $7,050 | −17% |
| Augusta, GA | 231,930 jobs | $3,500 – $10,600 | $7,100 | −17% |
| Lancaster, PA | 252,230 jobs | $3,750 – $11,400 | $7,550 | −11% |
| Fort Wayne, IN | 225,520 jobs | $3,650 – $11,000 | $7,300 | −14% |
Climate in Trenton: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for Trenton Mercer Co Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Trenton (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Trenton gets about 46 inches of precipitation in a normal year, including roughly 27 inches of snow. The wettest months are June, July and August (4.4 inches in July). Inside the workable window, April and November are the driest, at 3.6 and 3.2 inches. The station averages about 22 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 24 | 3.3 | Cold |
| Feb | 43 | 26 | 2.6 | Cold |
| Mar | 51 | 33 | 4.0 | Workable |
| Apr | 63 | 42 | 3.6 | Workable |
| May | 72 | 52 | 4.0 | Workable |
| Jun | 81 | 61 | 4.3 | Workable |
| Jul | 86 | 67 | 4.4 | Workable |
| Aug | 84 | 65 | 4.2 | Workable |
| Sep | 77 | 58 | 4.0 | Workable |
| Oct | 66 | 46 | 3.8 | Workable |
| Nov | 55 | 36 | 3.2 | Workable |
| Dec | 44 | 29 | 4.0 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,800 to $10,200 for Trenton, NJ is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Trenton, NJ line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Trenton: your questions
+How much does it cost to install an aluminum fence in Trenton?
For 150 linear ft, expect $4,300 to $12,700 in the Trenton area. A standard-spec job lands at $6,800 to $10,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Trenton?
About $28.50 to $83.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Trenton or Philadelphia?
Philadelphia is 40 miles away. The midpoint for 150 linear ft there is $7,750, which is 8% less than Trenton ($8,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Trenton?
About 42% at the midpoint, or $3,550 out of $8,500. Materials are 57% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Trenton?
$4,300 to $12,700. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Trenton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Trenton area (our national range of $40 to $150 scaled by the local price level).
+Is Trenton expensive for aluminum fence compared with the rest of New Jersey?
Trenton is 2% below the New Jersey statewide estimate ($8,650 at the midpoint). We cover 3 metros in New Jersey; see the state page to compare them.
+What do carpenters earn in Trenton?
The BLS median is $31.58 an hour in the Trenton area, compared with $29.12 nationally. The 25th to 75th percentile range is $25.60 to $51.38.
+What do basic and premium aluminum fence work cost in Trenton?
For 150 linear ft, basic work runs $4,300 to $7,650 and premium work $9,350 to $12,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Trenton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. April and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Trenton?
$230 to $1,050, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Trenton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.