Vinyl fence cost in Orlando, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,550
- Per linear ft
- $28.50 – $56
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #231
- 1 = most expensive
Local price for a vinyl fence in the Orlando area: $4,300 to $8,550 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Carpenters earn a median of $23.92 an hour in the Orlando area, 18% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Orlando, FL, standard level
$5,550 to $7,250
About $36.50 to $47.50 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,000 | $1,500 |
| Permits and fees | $75 | $120 |
| Total | $5,550 | $7,250 |
Cost breakdown for 150 linear ft in Orlando, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 79% |
| Labor | $630 | $1,250 | $1,900 | 20% |
| Permits and fees | $40 | $95 | $150 | 2% |
| Total | $4,300 | $6,400 | $8,550 | 100% |
What is behind the Orlando number
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $23.92 an hour. Add the other trades involved and the blended wage index for Orlando is 0.84 (US = 1.00), which puts labor at 20% of the total.
Materials are scaled with BEA's regional price parity for goods. Orlando is at 96.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 101.4: $40 to $150.
Optional extras in Orlando
Add-ons start from national price ranges and are scaled by 0.90 for Orlando, which is the average of the area's wage index (0.84) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $700 |
| Remove old fence | $1,350 – $2,700 |
Who does the work: Orlando trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Orlando the blend is 0.84.
Carpenters (47-2031), 50% of the weighting: a median of $23.92 an hour, 18% below the US median of $29.12. The middle half of them earn between $21.13 and $28.25 an hour. About 5,360 work in the metro. That is 38.0 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 50%) the local median is $19.66 an hour, which is 13% below the national $22.66. The middle half of them earn between $17.62 and $22.55 an hour. BLS counts 12,290 of them working in the area, 87.1 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $110 to the midpoint estimate; the 25th percentile takes off about $70. That is a swing of roughly 1.1% to 1.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Orlando-Kissimmee-Sanford has 1,411,730 jobs in total (BLS, May 2025), ranking 20th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.13 | $23.92 | $28.25 | $29.12 | 0.82 | metro |
| Construction laborers (47-2061) | 50% | $17.62 | $19.66 | $22.55 | $22.66 | 0.87 | metro |
| Blended | 100% | 0.84 | |||||
What nearby projects cost in Orlando
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Orlando wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−8%) and chain-link fence lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,400 – $5,450 | −10% |
| Aluminum fence | 150 linear ft | $3,450 – $10,500 | −8% |
| Concrete slab | 400 sq ft | $2,200 – $4,800 | −8% |
Why two Orlando quotes can differ
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Is Orlando cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Orlando. Ocala is the lowest at about $6,350 (midpoint, 150 linear ft), 65 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Orlando, FLthis page | $4,300 – $8,550 | $6,400 | |
| Lakeland, FL40 miles | $4,250 – $8,450 | $6,350 | −1% |
| Palm Bay, FL40 miles | $4,300 – $8,600 | $6,450 | +1% |
| Deltona, FL50 miles | $4,300 – $8,550 | $6,400 | level |
| Ocala, FL65 miles | $4,250 – $8,400 | $6,350 | −1% |
| Sebastian, FL70 miles | $4,300 – $8,600 | $6,450 | +1% |
| Florida (statewide) | $4,400 – $8,750 | $6,550 | +2% |
| United States | $4,550 – $9,150 | $6,850 | +7% |
Out of the 300 metros we cover, Orlando ranks #231 for the cost of this job (#1 is the most expensive). Statewide, Orlando is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $4,600 – $9,200 | $6,900 | +8% |
| Tampa, FL | 1,447,120 jobs | $4,300 – $8,600 | $6,450 | +1% |
| Jacksonville, FL | 765,930 jobs | $4,300 – $8,600 | $6,450 | +1% |
| North Port, FL | 339,940 jobs | $4,350 – $8,700 | $6,500 | +2% |
| Cape Coral, FL | 304,790 jobs | $4,300 – $8,600 | $6,450 | +1% |
| Lakeland, FL | 265,280 jobs | $4,250 – $8,450 | $6,350 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Orlando against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tampa, FL | 1,447,120 jobs | $4,300 – $8,600 | $6,450 | +1% |
| Charlotte, NC | 1,358,370 jobs | $4,350 – $8,700 | $6,500 | +2% |
| San Diego, CA | 1,538,060 jobs | $5,000 – $10,200 | $7,600 | +18% |
| Baltimore, MD | 1,356,680 jobs | $4,650 – $9,350 | $7,000 | +9% |
Cost by quality level and size in Orlando
The cited range is split into basic, standard and premium bands, then scaled to Orlando. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,550 to $7,250
6-ft privacy fence, standard white
Premium
$6,850 to $8,550
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,000 | $3,750 – $4,900 | $4,600 – $5,750 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,550 – $7,250 | $6,850 – $8,550 |
| 200 ft (200 linear ft) | $5,700 – $7,950 | $7,400 – $9,650 | $9,100 – $11,300 |
| full lot (300 linear ft) | $8,550 – $11,900 | $11,100 – $14,400 | $13,600 – $16,900 |
The best months for vinyl fence in Orlando
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Orlando Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Orlando are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Orlando gets about 51 inches of precipitation in a normal year. The wettest months are June, July and August (8.1 inches in June). Inside the workable window, February and November are the driest, at 2.0 and 1.8 inches. The station averages about 110 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 72 | 50 | 2.5 | Workable |
| Feb | 75 | 52 | 2.0 | Workable |
| Mar | 79 | 56 | 3.0 | Workable |
| Apr | 84 | 61 | 2.6 | Workable |
| May | 88 | 66 | 4.0 | Workable |
| Jun | 91 | 72 | 8.1 | Hot |
| Jul | 92 | 73 | 7.5 | Hot |
| Aug | 92 | 74 | 7.7 | Hot |
| Sep | 90 | 72 | 6.4 | Hot |
| Oct | 85 | 66 | 3.5 | Workable |
| Nov | 78 | 58 | 1.8 | Workable |
| Dec | 74 | 53 | 2.5 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $7,250 for Orlando, FL is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Orlando, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Orlando: your questions
+How much does it cost to install a vinyl fence in Orlando?
For 150 linear ft, expect $4,300 to $8,550 in the Orlando area. A standard-spec job lands at $5,550 to $7,250. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Orlando?
About $28.50 to $56 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Orlando or Lakeland?
Lakeland is 40 miles away. The midpoint for 150 linear ft there is $6,350, which is 1% less than Orlando ($6,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Orlando?
About 20% at the midpoint, or $1,250 out of $6,400. Materials are 79% and permits 2%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Orlando?
$5,700 to $11,300. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Orlando?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Orlando area (our national range of $40 to $150 scaled by the local price level).
+Is Orlando expensive for vinyl fence compared with the rest of Florida?
Orlando is 2% below the Florida statewide estimate ($6,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Orlando?
The BLS median is $23.92 an hour in the Orlando area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.13 to $28.25.
+What do basic and premium vinyl fence work cost in Orlando?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,850 to $8,550. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Orlando?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Orlando?
$140 to $700, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Orlando
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.