Skip to content
CostLocal

Stamped concrete cost in Fort Wayne, IN

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (400 sq ft)
$3,250 – $8,000
Per sq ft
$8 – $19
before permit
Versus US midpoint
Level
US $5,600
Rank of 300 metros
#127
1 = most expensive

Local price for stamped concrete in the Fort Wayne area: $3,250 to $8,000 for 400 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Cement masons and concrete finishers earn a median of $29.13 an hour in the Fort Wayne area, 6% above the US median of $27.41.

Estimate your stamped concrete cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Two-tone color release and a border

Add-ons

Estimated cost for 400 sq ft in Fort Wayne, IN, standard level

$4,650 to $6,550

About $11.50 to $16 per sq ft before permits. Labor is about 51% of the bill.

Cost breakdown
PartLowHigh
Materials$2,200$2,900
Labor$2,350$3,450
Permits and fees$130$240
Total$4,650$6,550
Save and get a PDF report

Cost breakdown for 400 sq ft in Fort Wayne, IN

Part of the jobLowMidpointHighShare
Materials$1,700$2,550$3,40045%
Labor$1,500$2,900$4,30051%
Permits and fees$45$190$3203%
Total$3,250$5,600$8,000100%

What is behind the Fort Wayne number

The wage side of the estimate leans on cement masons and concrete finishers, who do 60% of the hours on a typical job. Their local median is $29.13 an hour. Add the other trades involved and the blended wage index for Fort Wayne is 1.07 (US = 1.00), which puts labor at 51% of the total.

Materials are scaled with BEA's regional price parity for goods. Fort Wayne is at 94.3 against 100 for the US, so a materials line of $2,700 nationally becomes $2,550 here (midpoint, 400 sq ft). Permits follow the all-items index of 92.6: $45 to $320.

Cost by quality level and size in Fort Wayne

The cited range is split into basic, standard and premium bands, then scaled to Fort Wayne. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x20 patio (200 sq ft) to 2-car driveway (600 sq ft).

Basic

$3,250 to $5,150

Basic pattern, one integral color

Standard

$4,650 to $6,550

Two-tone color release and a border

Premium

$6,100 to $8,000

Multi-color, hand-detailed, sealed to a high finish

Cost by size and quality level
SizeBasicStandardPremium
10x20 patio (200 sq ft)$1,650 – $2,650$2,400 – $3,400$3,150 – $4,150
20x20 patio (400 sq ft)$3,250 – $5,150$4,650 – $6,550$6,100 – $8,000
2-car driveway (600 sq ft)$4,850 – $7,650$6,950 – $9,750$9,050 – $11,800

Stamped concrete: what moves the price in Fort Wayne

  • Pattern and color

    Basic to average coloring runs $8-$19 per sq ft. A 2-car stamped driveway runs $12-$18 per sq ft (HomeGuide); Estimators.us puts decorative slabs at $15-$30.

  • Specialist labor

    Stamping has to be done before the concrete sets, so crews arrive in larger teams and charge for it.

  • Sealing and vapor barrier

    Sealer is usually quoted separately; vapor barrier material is $0.20-$1.50 per sq ft depending on thickness (HomeGuide).

Who does the work: Fort Wayne trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fort Wayne the blend is 1.07.

Cement masons and concrete finishers (47-2051), 60% of the weighting: a median of $29.13 an hour, 6% above the US median of $27.41. The middle half of them earn between $23.38 and $31.93 an hour. About 260 work in the metro. That is 11.5 per 10,000 jobs, compared with 13.3 nationally, so the supply of crews looks typical.

For construction laborers (47-2061, weighted 30%) the local median is $22.83 an hour, which is in line with the national $22.66. The middle half of them earn between $19.33 and $28.67 an hour. BLS counts 1,670 of them working in the area, 74.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $37.24 an hour, 29% above the US median of $28.78. The middle half of them earn between $27.79 and $44.55 an hour. About 650 work in the metro. That is 28.8 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $170 to the midpoint estimate; the 25th percentile takes off about $340. That is a swing of roughly 6.0% to 2.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Fort Wayne has 225,520 jobs in total (BLS, May 2025), ranking 107th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)60%$23.38$29.13$31.93$27.411.06metro
Construction laborers (47-2061)30%$19.33$22.83$28.67$22.661.01metro
Operating engineers and other construction equipment operators (47-2073)10%$27.79$37.24$44.55$28.781.29metro
Blended100%1.07

Extras that change the Fort Wayne total

Add-ons start from national price ranges and are scaled by 1.01 for Fort Wayne, which is the average of the area's wage index (1.07) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add a vapor barrier$200 – $400

Related projects, priced for Fort Wayne

Jobs that often go together with stamped concrete are priced below at their usual sizes, using the same Fort Wayne wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (+13%) and paver patio lowest (−2%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Concrete patio300 sq ft$1,250 – $4,050level
Concrete driveway600 sq ft$3,700 – $9,450+2%
Paver patio300 sq ft$2,950 – $5,350−2%
Concrete slab400 sq ft$2,450 – $5,150−1%
Asphalt driveway600 sq ft$3,350 – $8,500+13%
Gravel driveway1,000 sq ft$2,650 – $10,700+5%

Fort Wayne against nearby metros and the rest of Indiana

Of the five closest metros, 3 are cheaper than Fort Wayne. Niles is the lowest at about $5,350 (midpoint, 400 sq ft), 95 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Fort Wayne, INthis page$3,250 – $8,000$5,600
Elkhart, IN55 miles$3,250 – $8,000$5,600level
South Bend, IN70 miles$3,250 – $8,050$5,650+1%
Kalamazoo, MI85 miles$3,100 – $7,650$5,400−4%
Toledo, OH85 miles$3,250 – $8,050$5,650level
Niles, MI95 miles$3,100 – $7,600$5,350−5%
Indiana (statewide)$3,300 – $8,150$5,750+2%
United States$3,250 – $7,950$5,600level

Out of the 300 metros we cover, Fort Wayne ranks #127 for the cost of this job (#1 is the most expensive). Statewide, Fort Wayne is 2% below the Indiana figure.

Elsewhere in Indiana

Indiana metros compared with Fort Wayne
MetroSizeRangeMidpointvs. here
Indianapolis, IN1,105,170 jobs$3,300 – $8,200$5,750+2%
Evansville, IN135,250 jobs$3,350 – $8,300$5,850+4%
South Bend, IN131,670 jobs$3,250 – $8,050$5,650+1%
Elkhart, IN127,730 jobs$3,250 – $8,000$5,600level
Lafayette, IN102,200 jobs$3,250 – $7,950$5,600level
Bloomington, IN73,240 jobs$3,300 – $8,150$5,700+2%

Metros of a similar size

Big cities and small ones price differently, so here is Fort Wayne against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Augusta, GA231,930 jobs$2,900 – $7,050$5,000−11%
Springfield, MO223,030 jobs$3,150 – $7,750$5,450−3%
Trenton, NJ240,190 jobs$3,700 – $9,250$6,500+16%
Deltona, FL219,740 jobs$3,000 – $7,250$5,100−9%

The best months for stamped concrete in Fort Wayne

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Ft Wayne Intl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For pouring concrete, the comfortable months in Fort Wayne are May through October: 6 of 12. Outside them, January, February, March, April, November and December have an average overnight low of 40°F or below.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Fort Wayne gets about 39 inches of precipitation in a normal year, including roughly 34 inches of snow. The wettest months are May, June and July (4.6 inches in May). Inside the workable window, September and October are the driest, at 3.0 and 3.0 inches. The station averages about 16 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Ft Wayne Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan33182.5Cold
Feb37212.1Cold
Mar48292.8Cold
Apr61393.7Cold
May72504.6Workable
Jun81604.5Workable
Jul84644.0Workable
Aug82613.8Workable
Sep76533.0Workable
Oct64433.0Workable
Nov49333.0Cold
Dec38242.5Cold

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,650 to $6,550 for Fort Wayne, IN is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Fort Wayne, IN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Stamped concrete in Fort Wayne: your questions

+How much does it cost to pour stamped concrete in Fort Wayne?

For 400 sq ft, expect $3,250 to $8,000 in the Fort Wayne area. A standard-spec job lands at $4,650 to $6,550. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for stamped concrete in Fort Wayne?

About $8 to $19 per sq ft for materials and labor, plus $45 to $320 for the permit if one is needed. The US range is $8 to $19.

+Is stamped concrete cheaper in Fort Wayne or Elkhart?

Elkhart is 55 miles away. The midpoint for 400 sq ft there is $5,600, which is 0% less than Fort Wayne ($5,600). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Fort Wayne?

About 51% at the midpoint, or $2,900 out of $5,600. Materials are 45% and permits 3%. Nationally, labor is 48%.

+What would 20x20 patio (400 sq ft) cost in Fort Wayne?

$3,250 to $8,000. Pick a different size in the estimator above to get your own number.

+Does stamped concrete need a permit in Fort Wayne?

Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $320 for fees in the Fort Wayne area (our national range of $50 to $350 scaled by the local price level).

+Is Fort Wayne expensive for stamped concrete compared with the rest of Indiana?

Fort Wayne is 2% below the Indiana statewide estimate ($5,750 at the midpoint). We cover 8 metros in Indiana; see the state page to compare them.

+What do cement masons and concrete finishers earn in Fort Wayne?

The BLS median is $29.13 an hour in the Fort Wayne area, compared with $27.41 nationally. The 25th to 75th percentile range is $23.38 to $31.93.

+What do basic and premium stamped concrete work cost in Fort Wayne?

For 400 sq ft, basic work runs $3,250 to $5,150 and premium work $6,100 to $8,000. Basic means: basic pattern, one integral color. Premium means: multi-color, hand-detailed, sealed to a high finish.

+When is the best time to pour stamped concrete in Fort Wayne?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through October. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add a vapor barrier" add in Fort Wayne?

$200 to $400 for 400 sq ft, from a national range scaled by the local wage and goods indexes.

Stamped concrete near Fort Wayne

Stamped concrete: all pricesStamped concrete in IndianaAll projects in Fort WayneIndiana cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's 200 sq ft stamped-patio line ($900-$1,800), divided by 200 sq ft.