Skip to content
CostLocal

Concrete driveway cost in Amarillo, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (600 sq ft)
$3,150 – $7,750
Per sq ft
$5.15 – $12.50
before permit
Versus US midpoint
−15%
US $6,450
Rank of 300 metros
#271
1 = most expensive

If you want to pour a concrete driveway in Amarillo, plan on $3,150 to $7,750 for 600 sq ft, all in. Per sq ft, that is $5.15 to $12.50 for materials and labor, with the permit on top. The local midpoint runs 15% lower than the national one. Cement masons and concrete finishers earn a median of $22.00 an hour in the Amarillo area, 20% below the US median of $27.41.

Estimate your concrete driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

5-inch with rebar and saw-cut joints, a border or one color

Add-ons

Estimated cost for 600 sq ft in Amarillo, TX, standard level

$4,500 to $6,350

About $7.35 to $10.50 per sq ft before permits. Labor is about 65% of the bill.

Cost breakdown
PartLowHigh
Materials$1,600$1,950
Labor$2,850$4,250
Permits and fees$85$140
Total$4,500$6,350
Save and get a PDF report

Cost breakdown for 600 sq ft in Amarillo, TX

Part of the jobLowMidpointHighShare
Materials$1,300$1,750$2,25033%
Labor$1,800$3,550$5,30065%
Permits and fees$45$110$1802%
Total$3,150$5,450$7,750100%

What is behind the Amarillo number

Labor is 65% of the midpoint bill here, against 69% nationally. The mix of trades behind this job is cement masons and concrete finishers (50%), construction laborers (30%), operating engineers and other construction equipment operators (10%), carpenters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Amarillo the blended ratio comes out at 0.80.

On the materials line, the BEA goods price index for the Amarillo metro is 93.8 (US = 100). The midpoint materials bill for 600 sq ft comes to $1,750, compared with $1,900 at national prices. Permit and inspection fees are scaled by the broader index (91.8) and land at $45 to $180.

Amarillo against nearby metros and the rest of Texas

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $5,450 to $5,900 across Amarillo and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Amarillo, TXthis page$3,150 – $7,750$5,450
Lubbock, TX125 miles$3,150 – $7,750$5,450level
Midland, TX220 miles$3,250 – $8,150$5,700+5%
Santa Fe, NM230 miles$3,400 – $8,450$5,900+9%
Abilene, TX230 miles$3,100 – $7,750$5,450level
Odessa, TX235 miles$3,200 – $8,000$5,600+3%
Texas (statewide)$3,250 – $8,100$5,700+5%
United States$3,650 – $9,200$6,450+18%

Across 300 US metros, Amarillo comes in at #271 from the top. The priciest is Kahului, HI at $10,000; the cheapest is McAllen, TX at $4,950 (midpoints, 600 sq ft). Statewide, Amarillo is 4% below the Texas figure.

Other Texas metros

Texas metros compared with Amarillo
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$3,400 – $8,450$5,950+9%
Houston, TX3,289,720 jobs$3,300 – $8,150$5,750+5%
Austin, TX1,293,690 jobs$3,300 – $8,250$5,800+6%
San Antonio, TX1,126,880 jobs$3,150 – $7,900$5,550+2%
El Paso, TX339,120 jobs$3,000 – $7,300$5,150−5%
McAllen, TX296,700 jobs$2,850 – $7,000$4,950−9%

Cities with a workforce like Amarillo's

Big cities and small ones price differently, so here is Amarillo against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Appleton, WI124,230 jobs$4,050 – $10,500$7,300+34%
Rochester, MN122,980 jobs$4,150 – $10,700$7,450+37%
Duluth, MN124,710 jobs$4,100 – $10,600$7,350+35%
Midland, TX122,180 jobs$3,250 – $8,150$5,700+5%

Pick a size, pick a tier: concrete driveway pricing in Amarillo

Three bands are cut from the same cited range and localized for Amarillo wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$3,150 to $4,950

Plain gray, 4-inch broom finish, flat site

Standard

$4,500 to $6,350

5-inch with rebar and saw-cut joints, a border or one color

Premium

$5,900 to $7,750

6-inch for heavy vehicles, stamped or colored, grading needed

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,300 – $2,050$1,850 – $2,650$2,450 – $3,200
2-car (20x24), 480 sq ft$2,500 – $4,000$3,650 – $5,100$4,750 – $6,250
2-car + apron (600 sq ft)$3,150 – $4,950$4,500 – $6,350$5,900 – $7,750
3-car (900 sq ft)$4,650 – $7,400$6,700 – $9,450$8,800 – $11,500

What nearby projects cost in Amarillo

Because every project leans on different trades, Amarillo's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs −10% and concrete patio −13%.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$2,750 – $6,600−10%
Gravel driveway1,000 sq ft$2,200 – $8,950−12%
Concrete slab400 sq ft$2,150 – $4,600−12%
Stamped concrete400 sq ft$2,850 – $6,900−13%
Paver patio300 sq ft$2,650 – $4,850−11%
Concrete patio300 sq ft$1,100 – $3,450−13%

Amarillo labor market for concrete driveway

Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Amarillo is 0.80 times the national level.

For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $22.00 an hour, which is 20% below the national $27.41. The middle half of them earn between $20.98 and $27.05 an hour. BLS counts 240 of them working in the area, 19.4 for every 10,000 jobs (US: 13.3), so the local bench is deeper than average.

Construction laborers (47-2061), 30% of the weighting: a median of $18.35 an hour, 19% below the US median of $22.66. The middle half of them earn between $16.77 and $21.85 an hour. About 970 work in the metro. That is 78.3 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $23.48 an hour, which is 18% below the national $28.78. The middle half of them earn between $21.41 and $28.73 an hour. BLS counts 490 of them working in the area, 39.5 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

For carpenters (47-2031, weighted 10%) the local median is $22.97 an hour, which is 21% below the national $29.12. The middle half of them earn between $18.55 and $29.60 an hour. BLS counts 350 of them working in the area, 28.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($27.05 an hour) instead of the median, the labor line grows by about $410. At the 25th percentile ($20.98) it shrinks by about $80. The total moves by 7.5% or 1.5%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 123,930 jobs in the Amarillo area. That makes it the 175th largest of the 300 metros we cover, with 0.08% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$20.98$22.00$27.05$27.410.80metro
Construction laborers (47-2061)30%$16.77$18.35$21.85$22.660.81metro
Operating engineers and other construction equipment operators (47-2073)10%$21.41$23.48$28.73$28.780.82metro
Carpenters (47-2031)10%$18.55$22.97$29.60$29.120.79metro
Blended100%0.80

Optional extras in Amarillo

Extras are quoted nationally and then scaled to Amarillo by the average of the local wage index (0.80) and goods index (0.94), a factor of 0.87. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add rebar reinforcement$520 – $1,550
Remove the old driveway$1,050 – $3,150

Why two Amarillo quotes can differ

  • Grading and drainage

    Professional grading runs $3-$8 per sq ft or $700-$2,500 for a typical job. A sloped lot or poor soil raises it.

  • Finish

    Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).

  • Permits and the apron

    A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.

Climate in Amarillo: timing your concrete driveway job

We use NOAA's 1991-2020 climate normals for Amarillo (5 miles from the city center). These are 30-year monthly averages, not forecasts.

April through May and September through October are the stretches where pouring concrete runs into the fewest weather problems in Amarillo (4 of 12 months). January, February, March, November and December have an average overnight low of 40°F or below; June, July and August have an average daytime high of 90°F or more.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Heat matters for concrete as well. With average highs of 90°F or more in June, July and August, crews often start early, wet the base and plan for faster set times.

Amarillo gets about 20 inches of precipitation in a normal year, including roughly 17 inches of snow. The wettest months are June, July and August (2.9 inches in August). Inside the workable window, April and September are the driest, at 1.4 and 1.7 inches. The station averages about 72 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Amarillo (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan52250.7Cold
Feb56280.5Cold
Mar65351.3Cold
Apr72431.4Workable
May81532.3Workable
Jun90622.9Hot
Jul93662.8Hot
Aug91652.9Hot
Sep84581.7Workable
Oct73451.8Workable
Nov61340.8Cold
Dec52260.7Cold

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,500 to $6,350 for Amarillo, TX is attached.

Detailed concrete driveway report for Amarillo, TX, $9

Multi-page report for Amarillo, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete driveway in Amarillo: your questions

+How much does it cost to pour a concrete driveway in Amarillo?

For 600 sq ft, expect $3,150 to $7,750 in the Amarillo area. A standard-spec job lands at $4,500 to $6,350. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for concrete driveway in Amarillo?

About $5.15 to $12.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $6 to $15.

+Is concrete driveway cheaper in Amarillo or Lubbock?

Lubbock is 125 miles away. The midpoint for 600 sq ft there is $5,450, which is 0% more than Amarillo ($5,450). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Amarillo?

About 65% at the midpoint, or $3,550 out of $5,450. Materials are 33% and permits 2%. Nationally, labor is 69%.

+What would 2-car + apron (600 sq ft) cost in Amarillo?

$3,150 to $7,750. Pick a different size in the estimator above to get your own number.

+Does concrete driveway need a permit in Amarillo?

Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Amarillo area (our national range of $50 to $200 scaled by the local price level).

+Is Amarillo expensive for concrete driveway compared with the rest of Texas?

Amarillo is 4% below the Texas statewide estimate ($5,700 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do cement masons and concrete finishers earn in Amarillo?

The BLS median is $22.00 an hour in the Amarillo area, compared with $27.41 nationally. The 25th to 75th percentile range is $20.98 to $27.05.

+What do basic and premium concrete driveway work cost in Amarillo?

For 600 sq ft, basic work runs $3,150 to $4,950 and premium work $5,900 to $7,750. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.

+When is the best time to pour a concrete driveway in Amarillo?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through May and September through October. April and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add rebar reinforcement" add in Amarillo?

$520 to $1,550 for 600 sq ft, from a national range scaled by the local wage and goods indexes.

Concrete driveway near Amarillo

Concrete driveway: all pricesConcrete driveway in TexasAll projects in AmarilloTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.