Concrete driveway cost in Lubbock, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,150 – $7,750
- Per sq ft
- $5.15 – $12.50
- before permit
- Versus US midpoint
- −15%
- US $6,450
- Rank of 300 metros
- #270
- 1 = most expensive
Local price for a concrete driveway in the Lubbock area: $3,150 to $7,750 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 15% lower than the US figure. Cement masons and concrete finishers earn a median of $23.03 an hour in the Lubbock area, 16% below the US median of $27.41.
Estimate your concrete driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Lubbock, TX, standard level
$4,500 to $6,350
About $7.40 to $10.50 per sq ft before permits. Labor is about 65% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,600 | $1,950 |
| Labor | $2,850 | $4,250 |
| Permits and fees | $85 | $140 |
| Total | $4,500 | $6,350 |
Cost breakdown for 600 sq ft in Lubbock, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,300 | $1,750 | $2,250 | 33% |
| Labor | $1,800 | $3,550 | $5,300 | 65% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $3,150 | $5,450 | $7,750 | 100% |
Where the Lubbock price comes from
The wage side of the estimate leans on cement masons and concrete finishers, who do 50% of the hours on a typical job. Their local median is $23.03 an hour. Add the other trades involved and the blended wage index for Lubbock is 0.80 (US = 1.00), which puts labor at 65% of the total.
Materials are scaled with BEA's regional price parity for goods. Lubbock is at 93.8 against 100 for the US, so a materials line of $1,900 nationally becomes $1,750 here (midpoint, 600 sq ft). Permits follow the all-items index of 91.3: $45 to $180.
Cost by quality level and size in Lubbock
The cited range is split into basic, standard and premium bands, then scaled to Lubbock. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to 3-car (900 sq ft).
Basic
$3,150 to $4,950
Plain gray, 4-inch broom finish, flat site
Standard
$4,500 to $6,350
5-inch with rebar and saw-cut joints, a border or one color
Premium
$5,900 to $7,750
6-inch for heavy vehicles, stamped or colored, grading needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,300 – $2,050 | $1,850 – $2,650 | $2,450 – $3,200 |
| 2-car (20x24), 480 sq ft | $2,500 – $4,000 | $3,650 – $5,100 | $4,750 – $6,250 |
| 2-car + apron (600 sq ft) | $3,150 – $4,950 | $4,500 – $6,350 | $5,900 – $7,750 |
| 3-car (900 sq ft) | $4,650 – $7,400 | $6,700 – $9,450 | $8,800 – $11,500 |
Related projects, priced for Lubbock
Jobs that often go together with concrete driveway are priced below at their usual sizes, using the same Lubbock wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (−11%) and paver patio lowest (−14%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Asphalt driveway | 600 sq ft | $2,750 – $6,550 | −11% |
| Gravel driveway | 1,000 sq ft | $2,150 – $8,750 | −14% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Stamped concrete | 400 sq ft | $2,900 – $6,950 | −12% |
| Paver patio | 300 sq ft | $2,600 – $4,650 | −14% |
| Concrete patio | 300 sq ft | $1,100 – $3,450 | −13% |
The best months for concrete driveway in Lubbock
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Lubbock Wfo (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For pouring concrete, the comfortable months in Lubbock are April through May and September through October: 4 of 12. Outside them, January, February, March, November and December have an average overnight low of 40°F or below, and June, July and August have an average daytime high of 90°F or more.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Heat matters for concrete as well. With average highs of 90°F or more in June, July and August, crews often start early, wet the base and plan for faster set times.
Lubbock gets about 19 inches of precipitation in a normal year. The wettest months are May, June and September (2.7 inches in June). Inside the workable window, April and October are the driest, at 1.4 and 1.7 inches. The station averages about 91 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 55 | 30 | 0.7 | Cold |
| Feb | 59 | 32 | 0.6 | Cold |
| Mar | 68 | 39 | 1.2 | Cold |
| Apr | 76 | 48 | 1.4 | Workable |
| May | 84 | 57 | 2.6 | Workable |
| Jun | 91 | 66 | 2.7 | Hot |
| Jul | 93 | 70 | 2.2 | Hot |
| Aug | 91 | 69 | 2.0 | Hot |
| Sep | 84 | 61 | 2.6 | Workable |
| Oct | 76 | 50 | 1.7 | Workable |
| Nov | 64 | 38 | 0.8 | Cold |
| Dec | 55 | 30 | 0.8 | Cold |
Why two Lubbock quotes can differ
Finish
Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).
Permits and the apron
A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.
Thickness
HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.
Optional extras in Lubbock
Add-ons start from national price ranges and are scaled by 0.87 for Lubbock, which is the average of the area's wage index (0.80) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $520 – $1,550 |
| Remove the old driveway | $1,050 – $3,150 |
Who does the work: Lubbock trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lubbock the blend is 0.80.
Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $23.03 an hour, 16% below the US median of $27.41. The middle half of them earn between $18.75 and $23.45 an hour. About 150 work in the metro. That is 9.0 per 10,000 jobs, compared with 13.3 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $17.78 an hour, which is 22% below the national $22.66. The middle half of them earn between $16.45 and $21.13 an hour. BLS counts 980 of them working in the area, 58.8 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $22.35 an hour, 22% below the US median of $28.78. The middle half of them earn between $21.37 and $27.40 an hour. About 550 work in the metro. That is 33.0 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
Carpenters (47-2031), 10% of the weighting: a median of $20.91 an hour, 28% below the US median of $29.12. The middle half of them earn between $17.42 and $23.78 an hour. About 280 work in the metro. That is 16.8 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $35 to the midpoint estimate; the 25th percentile takes off about $340. That is a swing of roughly 6.3% to 0.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lubbock has 166,780 jobs in total (BLS, May 2025), ranking 140th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $18.75 | $23.03 | $23.45 | $27.41 | 0.84 | metro |
| Construction laborers (47-2061) | 30% | $16.45 | $17.78 | $21.13 | $22.66 | 0.78 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $21.37 | $22.35 | $27.40 | $28.78 | 0.78 | metro |
| Carpenters (47-2031) | 10% | $17.42 | $20.91 | $23.78 | $29.12 | 0.72 | metro |
| Blended | 100% | 0.80 | |||||
Lubbock against nearby metros and the rest of Texas
Of the five closest metros, 3 are cheaper than Lubbock. El Paso is the lowest at about $5,150 (midpoint, 600 sq ft), 250 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lubbock, TXthis page | $3,150 – $7,750 | $5,450 | |
| Midland, TX95 miles | $3,250 – $8,150 | $5,700 | +5% |
| Odessa, TX115 miles | $3,200 – $8,000 | $5,600 | +3% |
| Amarillo, TX125 miles | $3,150 – $7,750 | $5,450 | level |
| Abilene, TX145 miles | $3,100 – $7,750 | $5,450 | level |
| El Paso, TX250 miles | $3,000 – $7,300 | $5,150 | −5% |
| Texas (statewide) | $3,250 – $8,100 | $5,700 | +4% |
| United States | $3,650 – $9,200 | $6,450 | +18% |
Out of the 300 metros we cover, Lubbock ranks #270 for the cost of this job (#1 is the most expensive). Statewide, Lubbock is 4% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $3,400 – $8,450 | $5,950 | +9% |
| Houston, TX | 3,289,720 jobs | $3,300 – $8,150 | $5,750 | +5% |
| Austin, TX | 1,293,690 jobs | $3,300 – $8,250 | $5,800 | +6% |
| San Antonio, TX | 1,126,880 jobs | $3,150 – $7,900 | $5,550 | +2% |
| El Paso, TX | 339,120 jobs | $3,000 – $7,300 | $5,150 | −5% |
| McAllen, TX | 296,700 jobs | $2,850 – $7,000 | $4,950 | −9% |
Metros of a similar size
Big cities and small ones price differently, so here is Lubbock against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlantic City, NJ | 168,700 jobs | $3,950 – $10,100 | $7,050 | +29% |
| Peoria, IL | 166,020 jobs | $4,250 – $11,100 | $7,650 | +41% |
| Fort Collins, CO | 169,430 jobs | $3,650 – $9,250 | $6,450 | +19% |
| Montgomery, AL | 165,550 jobs | $3,100 – $7,600 | $5,350 | −2% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,500 to $6,350 for Lubbock, TX is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Lubbock, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete driveway in Lubbock: your questions
+How much does it cost to pour a concrete driveway in Lubbock?
For 600 sq ft, expect $3,150 to $7,750 in the Lubbock area. A standard-spec job lands at $4,500 to $6,350. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete driveway in Lubbock?
About $5.15 to $12.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $6 to $15.
+Is concrete driveway cheaper in Lubbock or Midland?
Midland is 95 miles away. The midpoint for 600 sq ft there is $5,700, which is 5% more than Lubbock ($5,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lubbock?
About 65% at the midpoint, or $3,550 out of $5,450. Materials are 33% and permits 2%. Nationally, labor is 69%.
+What would 2-car + apron (600 sq ft) cost in Lubbock?
$3,150 to $7,750. Pick a different size in the estimator above to get your own number.
+Does concrete driveway need a permit in Lubbock?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Lubbock area (our national range of $50 to $200 scaled by the local price level).
+Is Lubbock expensive for concrete driveway compared with the rest of Texas?
Lubbock is 4% below the Texas statewide estimate ($5,700 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do cement masons and concrete finishers earn in Lubbock?
The BLS median is $23.03 an hour in the Lubbock area, compared with $27.41 nationally. The 25th to 75th percentile range is $18.75 to $23.45.
+What do basic and premium concrete driveway work cost in Lubbock?
For 600 sq ft, basic work runs $3,150 to $4,950 and premium work $5,900 to $7,750. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.
+When is the best time to pour a concrete driveway in Lubbock?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through May and September through October. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add rebar reinforcement" add in Lubbock?
$520 to $1,550 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete driveway near Lubbock
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.