Stamped concrete cost in Palm Bay, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (400 sq ft)
- $3,000 – $7,300
- Per sq ft
- $7.35 – $17.50
- before permit
- Versus US midpoint
- −8%
- US $5,600
- Rank of 300 metros
- #209
- 1 = most expensive
Local price for stamped concrete in the Palm Bay area: $3,000 to $7,300 for 400 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% lower than the US figure. Cement masons and concrete finishers earn a median of $22.79 an hour in the Palm Bay area, 17% below the US median of $27.41.
Estimate your stamped concrete cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 400 sq ft in Palm Bay, FL, standard level
$4,300 to $6,000
About $10.50 to $14.50 per sq ft before permits. Labor is about 46% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,250 | $2,950 |
| Labor | $1,900 | $2,800 |
| Permits and fees | $140 | $260 |
| Total | $4,300 | $6,000 |
Cost breakdown for 400 sq ft in Palm Bay, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,750 | $2,600 | $3,450 | 51% |
| Labor | $1,200 | $2,350 | $3,450 | 46% |
| Permits and fees | $50 | $200 | $350 | 4% |
| Total | $3,000 | $5,150 | $7,300 | 100% |
What is behind the Palm Bay number
Labor is 46% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is cement masons and concrete finishers (60%), construction laborers (30%), operating engineers and other construction equipment operators (10%). We weight each trade's local median wage by that share and compare it with the national median. In Palm Bay the blended ratio comes out at 0.87.
Materials are scaled with BEA's regional price parity for goods. Palm Bay is at 96.2 against 100 for the US, so a materials line of $2,700 nationally becomes $2,600 here (midpoint, 400 sq ft). Permits follow the all-items index of 100.0: $50 to $350.
Palm Bay: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Palm Bay. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x20 patio (200 sq ft) to 2-car driveway (600 sq ft).
Basic
$3,000 to $4,700
Basic pattern, one integral color
Standard
$4,300 to $6,000
Two-tone color release and a border
Premium
$5,550 to $7,300
Multi-color, hand-detailed, sealed to a high finish
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x20 patio (200 sq ft) | $1,500 – $2,450 | $2,200 – $3,150 | $2,900 – $3,800 |
| 20x20 patio (400 sq ft) | $3,000 – $4,700 | $4,300 – $6,000 | $5,550 – $7,300 |
| 2-car driveway (600 sq ft) | $4,450 – $7,000 | $6,350 – $8,850 | $8,250 – $10,700 |
Who does the work: Palm Bay trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Palm Bay the blend is 0.87.
Cement masons and concrete finishers (47-2051), 60% of the weighting: a median of $22.79 an hour, 17% below the US median of $27.41. The middle half of them earn between $21.85 and $27.52 an hour. About 370 work in the metro. That is 15.1 per 10,000 jobs, compared with 13.3 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $21.50 an hour, which is 5% below the national $22.66. The middle half of them earn between $17.96 and $23.16 an hour. BLS counts 1,870 of them working in the area, 76.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $23.62 an hour, 18% below the US median of $28.78. The middle half of them earn between $21.72 and $27.95 an hour. About 620 work in the metro. That is 25.3 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $280 to the midpoint estimate; the 25th percentile takes off about $55. That is a swing of roughly 1.1% to 5.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Palm Bay-Melbourne-Titusville has 245,170 jobs in total (BLS, May 2025), ranking 104th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 60% | $21.85 | $22.79 | $27.52 | $27.41 | 0.83 | metro |
| Construction laborers (47-2061) | 30% | $17.96 | $21.50 | $23.16 | $22.66 | 0.95 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $21.72 | $23.62 | $27.95 | $28.78 | 0.82 | metro |
| Blended | 100% | 0.87 | |||||
Specs and site conditions that change a Palm Bay bid
Specialist labor
Stamping has to be done before the concrete sets, so crews arrive in larger teams and charge for it.
Sealing and vapor barrier
Sealer is usually quoted separately; vapor barrier material is $0.20-$1.50 per sq ft depending on thickness (HomeGuide).
Not included
These prices don't include site prep that depends on the project: demolition, grading, or a thicker base.
Add-ons priced for Palm Bay
Add-ons start from national price ranges and are scaled by 0.91 for Palm Bay, which is the average of the area's wage index (0.87) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a vapor barrier | $180 – $370 |
What nearby projects cost in Palm Bay
Jobs that often go together with stamped concrete are priced below at their usual sizes, using the same Palm Bay wage and price inputs. Compared with national midpoints, paver patio comes out highest (−5%) and concrete driveway lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete patio | 300 sq ft | $1,150 – $3,650 | −9% |
| Concrete driveway | 600 sq ft | $3,300 – $8,200 | −11% |
| Paver patio | 300 sq ft | $2,850 – $5,200 | −5% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
| Asphalt driveway | 600 sq ft | $2,850 – $6,850 | −7% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,450 | −8% |
Palm Bay against nearby metros and the rest of Florida
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $5,050 to $5,150 across Palm Bay and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Palm Bay, FLthis page | $3,000 – $7,300 | $5,150 | |
| Orlando, FL40 miles | $2,950 – $7,200 | $5,100 | −1% |
| Sebastian, FL40 miles | $3,000 – $7,300 | $5,150 | level |
| Lakeland, FL65 miles | $2,950 – $7,150 | $5,050 | −2% |
| Deltona, FL70 miles | $3,000 – $7,250 | $5,100 | level |
| Port St. Lucie, FL75 miles | $3,000 – $7,250 | $5,150 | level |
| Florida (statewide) | $3,050 – $7,400 | $5,200 | +2% |
| United States | $3,250 – $7,950 | $5,600 | +9% |
Out of the 300 metros we cover, Palm Bay ranks #209 for the cost of this job (#1 is the most expensive). Statewide, Palm Bay is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,150 – $7,700 | $5,450 | +6% |
| Tampa, FL | 1,447,120 jobs | $3,000 – $7,350 | $5,150 | +1% |
| Orlando, FL | 1,411,730 jobs | $2,950 – $7,200 | $5,100 | −1% |
| Jacksonville, FL | 765,930 jobs | $3,000 – $7,300 | $5,150 | +1% |
| North Port, FL | 339,940 jobs | $3,050 – $7,400 | $5,200 | +1% |
| Cape Coral, FL | 304,790 jobs | $3,000 – $7,300 | $5,150 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Palm Bay against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lancaster, PA | 252,230 jobs | $3,300 – $8,150 | $5,750 | +12% |
| Trenton, NJ | 240,190 jobs | $3,700 – $9,250 | $6,500 | +26% |
| Scranton, PA | 255,620 jobs | $3,300 – $8,000 | $5,650 | +10% |
| Augusta, GA | 231,930 jobs | $2,900 – $7,050 | $5,000 | −3% |
The best months for stamped concrete in Palm Bay
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Palm Bay (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For pouring concrete, the comfortable months in Palm Bay are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Heat matters for concrete as well. With average highs of 90°F or more in June, July and August, crews often start early, wet the base and plan for faster set times.
Palm Bay gets about 56 inches of precipitation in a normal year. The wettest months are June, August and September (8.0 inches in September). Inside the workable window, February and December are the driest, at 2.4 and 2.5 inches. The station averages about 102 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 73 | 49 | 2.6 | Workable |
| Feb | 75 | 52 | 2.4 | Workable |
| Mar | 79 | 55 | 3.0 | Workable |
| Apr | 83 | 60 | 2.8 | Workable |
| May | 87 | 65 | 4.4 | Workable |
| Jun | 90 | 71 | 7.6 | Hot |
| Jul | 91 | 73 | 6.6 | Hot |
| Aug | 92 | 73 | 7.1 | Hot |
| Sep | 89 | 72 | 8.0 | Workable |
| Oct | 85 | 67 | 5.6 | Workable |
| Nov | 79 | 59 | 3.0 | Workable |
| Dec | 75 | 52 | 2.5 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,300 to $6,000 for Palm Bay, FL is attached.
Detailed stamped concrete report for Palm Bay, FL, $9
Multi-page report for Palm Bay, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Stamped concrete in Palm Bay: your questions
+How much does it cost to pour stamped concrete in Palm Bay?
For 400 sq ft, expect $3,000 to $7,300 in the Palm Bay area. A standard-spec job lands at $4,300 to $6,000. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for stamped concrete in Palm Bay?
About $7.35 to $17.50 per sq ft for materials and labor, plus $50 to $350 for the permit if one is needed. The US range is $8 to $19.
+Is stamped concrete cheaper in Palm Bay or Orlando?
Orlando is 40 miles away. The midpoint for 400 sq ft there is $5,100, which is 1% less than Palm Bay ($5,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Palm Bay?
About 46% at the midpoint, or $2,350 out of $5,150. Materials are 51% and permits 4%. Nationally, labor is 48%.
+What would 20x20 patio (400 sq ft) cost in Palm Bay?
$3,000 to $7,300. Pick a different size in the estimator above to get your own number.
+Does stamped concrete need a permit in Palm Bay?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $350 for fees in the Palm Bay area (our national range of $50 to $350 scaled by the local price level).
+Is Palm Bay expensive for stamped concrete compared with the rest of Florida?
Palm Bay is 2% below the Florida statewide estimate ($5,200 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do cement masons and concrete finishers earn in Palm Bay?
The BLS median is $22.79 an hour in the Palm Bay area, compared with $27.41 nationally. The 25th to 75th percentile range is $21.85 to $27.52.
+What do basic and premium stamped concrete work cost in Palm Bay?
For 400 sq ft, basic work runs $3,000 to $4,700 and premium work $5,550 to $7,300. Basic means: basic pattern, one integral color. Premium means: multi-color, hand-detailed, sealed to a high finish.
+When is the best time to pour stamped concrete in Palm Bay?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a vapor barrier" add in Palm Bay?
$180 to $370 for 400 sq ft, from a national range scaled by the local wage and goods indexes.
Stamped concrete near Palm Bay
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Stamped Concrete Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's 200 sq ft stamped-patio line ($900-$1,800), divided by 200 sq ft.