Skip to content
CostLocal

Retaining wall cost in Abilene, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (200 sq ft of wall face)
$6,300 – $12,200
Per sq ft of wall face
$31 – $59
before permit
Versus US midpoint
−10%
US $10,300
Rank of 300 metros
#246
1 = most expensive

Abilene homeowners pay roughly $6,300 to $12,200 to build a retaining wall at 200 sq ft of wall face, or $31 to $59 per sq ft of wall face (permit not included). Against the US midpoint, Abilene is 10% lower. Brickmasons and blockmasons earn a median of $27.12 an hour in the Abilene area, 9% below the US median of $29.87.

Estimate your retaining wall cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard segmental block wall with drainage

Estimated cost for 200 sq ft of wall face in Abilene, TX, standard level

$8,050 to $10,400

About $39.50 to $50.50 per sq ft of wall face before permits. Labor is about 44% of the bill.

Cost breakdown
PartLowHigh
Materials$4,050$5,900
Labor$3,900$4,250
Permits and fees$150$300
Total$8,050$10,400
Save and get a PDF report

Cost breakdown for 200 sq ft of wall face in Abilene, TX

Part of the jobLowMidpointHighShare
Materials$2,650$4,950$7,30054%
Labor$3,600$4,050$4,50044%
Permits and fees$45$230$4102%
Total$6,300$9,250$12,200100%

Where the Abilene price comes from

We price the labor side from BLS wage data for 3 trades: brickmasons and blockmasons at 50%, construction laborers at 30%, operating engineers and other construction equipment operators at 20%. Weighted together, Abilene wages are 0.86 times the national level. Labor makes up about 44% of the midpoint estimate (46% at national prices). BLS does not publish this trade for the metro, so we used the Texas statewide median.

On the materials line, the BEA goods price index for the Abilene metro is 93.8 (US = 100). The midpoint materials bill for 200 sq ft of wall face comes to $4,950, compared with $5,300 at national prices. Permit and inspection fees are scaled by the broader index (90.4) and land at $45 to $410.

Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Abilene. The wage table below marks each row.

Cost by quality level and size in Abilene

Three bands are cut from the same cited range and localized for Abilene wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$6,300 to $8,650

Short block wall, easy access

Standard

$8,050 to $10,400

Standard segmental block wall with drainage

Premium

$9,850 to $12,200

Tall or stone wall, engineered, hard access

Cost by size and quality level
SizeBasicStandardPremium
short garden wall (4x25 ft), 100 sq ft of wall face$3,150 – $4,400$4,100 – $5,350$5,050 – $6,300
20 ft x 4 ft (80 sq ft of wall face)$2,550 – $3,600$3,300 – $4,350$4,100 – $5,150
40 ft x 4 ft (160 sq ft of wall face)$5,050 – $6,950$6,500 – $8,400$7,900 – $9,850
40 ft x 6 ft (240 sq ft of wall face)$7,550 – $10,400$9,650 – $12,500$11,800 – $14,600

Planning more than one job in Abilene?

Because every project leans on different trades, Abilene's wage level does not move all prices equally. Against the US midpoint, sod installation runs −9% and concrete driveway −15%.

Related projects with local prices
ProjectSizeRangevs. US
French drain60 linear ft$530 – $1,850−11%
Paver patio300 sq ft$2,650 – $4,850−11%
Concrete driveway600 sq ft$3,100 – $7,750−15%
Sod installation1,500 sq ft$1,350 – $3,000−9%
Sprinkler system4,000 sq ft of lawn$3,500 – $8,750−13%
Inground pool450 sq ft$31,900 – $99,700−12%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Abilene is 0.86 times the national level.

Brickmasons and blockmasons (47-2021) carry 50% of the labor weighting. BLS does not publish this trade for the Abilene metro, so we used the Texas statewide median: $27.12 an hour against $29.87 for the US. The middle half of them earn between $23.31 and $28.57 an hour.

Construction laborers (47-2061), 30% of the weighting: a median of $18.35 an hour, 19% below the US median of $22.66. The middle half of them earn between $16.82 and $22.01 an hour. About 570 work in the metro. That is 75.9 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 20%) the local median is $23.80 an hour, which is 17% below the national $28.78. The middle half of them earn between $21.07 and $28.74 an hour. BLS counts 230 of them working in the area, 30.6 for every 10,000 jobs (US: 30.7), so the local bench is about average.

Quotes come from real crews, not medians. If the brickmasons and blockmasons on your job are paid at the 75th percentile ($28.57 an hour) instead of the median, the labor line grows by about $110. At the 25th percentile ($23.31) it shrinks by about $300. The total moves by 1.2% or 3.2%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 75,070 jobs in the Abilene area. That makes it the 246th largest of the 300 metros we cover, with 0.05% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Brickmasons and blockmasons (47-2021)50%$23.31$27.12$28.57$29.870.91state
Construction laborers (47-2061)30%$16.82$18.35$22.01$22.660.81metro
Operating engineers and other construction equipment operators (47-2073)20%$21.07$23.80$28.74$28.780.83metro
Blended100%0.86

Is Abilene cheap or dear? The local comparison

Of the five closest metros, 3 are cheaper than Abilene. Lubbock is the lowest at about $8,900 (midpoint, 200 sq ft of wall face), 145 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Abilene, TXthis page$6,300 – $12,200$9,250
Midland, TX135 miles$6,450 – $12,400$9,450+2%
Killeen, TX140 miles$6,250 – $12,200$9,200level
Lubbock, TX145 miles$6,000 – $11,800$8,900−4%
Waco, TX155 miles$6,250 – $12,200$9,200level
Dallas, TX160 miles$6,850 – $13,300$10,100+9%
Texas (statewide)$6,500 – $12,700$9,600+4%
United States$7,050 – $13,500$10,300+11%

Across 300 US metros, Abilene comes in at #246 from the top. The priciest is Kahului, HI at $13,500; the cheapest is El Paso, TX at $8,850 (midpoints, 200 sq ft of wall face). Statewide, Abilene is 3% below the Texas figure.

Other Texas metros

Texas metros compared with Abilene
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$6,850 – $13,300$10,100+9%
Houston, TX3,289,720 jobs$6,600 – $12,900$9,750+5%
Austin, TX1,293,690 jobs$6,600 – $12,600$9,600+4%
San Antonio, TX1,126,880 jobs$6,300 – $12,300$9,300level
El Paso, TX339,120 jobs$5,900 – $11,700$8,850−5%
McAllen, TX296,700 jobs$6,050 – $11,900$8,950−3%

Cities with a workforce like Abilene's

Big cities and small ones price differently, so here is Abilene against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Kenosha, WI75,450 jobs$8,100 – $15,000$11,600+25%
Sioux City, IA75,010 jobs$7,150 – $13,300$10,200+10%
Warner Robins, GA76,050 jobs$6,200 – $12,200$9,200−1%
Blacksburg, VA74,070 jobs$6,400 – $12,500$9,450+2%

Why two Abilene quotes can differ

  • Height

    Walls over 4 feet need engineering, deeper excavation and more skilled labor; many cities require permits over 3-4 feet (HomeGuide).

  • Material

    Block, poured concrete and natural stone are priced differently; concrete and stone walls run higher than the segmental block default.

  • Drainage

    Every wall needs drainage behind it. A French drain adds $10-$85+ per linear foot.

When to schedule retaining wall in Abilene

We use NOAA's 1991-2020 climate normals for Abilene Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

September through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Abilene (9 of 12 months). June, July and August have an average daytime high of 90°F or more.

Abilene gets about 25 inches of precipitation in a normal year, including roughly 4 inches of snow. The wettest months are May, June and October (3.4 inches in June). Inside the workable window, January and December are the driest, at 1.1 and 1.3 inches. The station averages about 102 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Abilene Rgnl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan59341.1Workable
Feb63371.3Workable
Mar71451.7Workable
Apr79531.9Workable
May86623.2Workable
Jun93703.4Hot
Jul96731.9Hot
Aug96722.5Hot
Sep89652.7Workable
Oct79552.8Workable
Nov68431.4Workable
Dec59351.3Workable

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $8,050 to $10,400 for Abilene, TX is attached.

A detailed PDF report of this estimate, $9

The report lays out the retaining wall numbers for Abilene, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Retaining wall in Abilene: your questions

+How much does it cost to build a retaining wall in Abilene?

For 200 sq ft of wall face, expect $6,300 to $12,200 in the Abilene area. A standard-spec job lands at $8,050 to $10,400. Small jobs usually cost more per sq ft of wall face and large ones less.

+What is the price per sq ft of wall face for retaining wall in Abilene?

About $31 to $59 per sq ft of wall face for materials and labor, plus $45 to $410 for the permit if one is needed. The US range is $35 to $65.

+Is retaining wall cheaper in Abilene or Midland?

Midland is 135 miles away. The midpoint for 200 sq ft of wall face there is $9,450, which is 2% more than Abilene ($9,250). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Abilene?

About 44% at the midpoint, or $4,050 out of $9,250. Materials are 54% and permits 2%. Nationally, labor is 46%.

+What would 40 ft x 4 ft (160 sq ft of wall face) cost in Abilene?

$5,050 to $9,850. Pick a different size in the estimator above to get your own number.

+Does retaining wall need a permit in Abilene?

Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $410 for fees in the Abilene area (our national range of $50 to $450 scaled by the local price level).

+Is Abilene expensive for retaining wall compared with the rest of Texas?

Abilene is 3% below the Texas statewide estimate ($9,600 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do brickmasons and blockmasons earn in Abilene?

BLS has no published metro figure here, so we use the statewide median of $27.12 an hour, compared with $29.87 nationally. The 25th to 75th percentile range is $23.31 to $28.57.

+What do basic and premium retaining wall work cost in Abilene?

For 200 sq ft of wall face, basic work runs $6,300 to $8,650 and premium work $9,850 to $12,200. Basic means: short block wall, easy access. Premium means: tall or stone wall, engineered, hard access.

+When is the best time to build a retaining wall in Abilene?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. January and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Retaining wall near Abilene

Retaining wall: all pricesRetaining wall in TexasAll projects in AbileneTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 40% of the low installed price and 60% of the high one, since HomeGuide says labor is 40-60% of the total project cost.