French drain cost in Abilene, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $530 – $1,850
- Per linear ft
- $8.85 – $31
- before permit
- Versus US midpoint
- −11%
- US $1,350
- Rank of 300 metros
- #270
- 1 = most expensive
A French drain in Abilene, TX usually costs $530 to $1,850 for 60 linear ft. That works out to about $8.85 to $31 per linear ft before permits. Compared with the national midpoint that is $150 less. Construction laborers earn a median of $18.35 an hour in the Abilene area, 19% below the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Abilene, TX, standard level
$930 to $1,450
About $15.50 to $24.50 per linear ft before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $470 | $740 |
| Labor | $460 | $720 |
| Permits and fees | $0 | $0 |
| Total | $930 | $1,450 |
Cost breakdown for 60 linear ft in Abilene, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $270 | $610 | $950 | 51% |
| Labor | $260 | $590 | $920 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $530 | $1,200 | $1,850 | 100% |
What is behind the Abilene number
The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $18.35 an hour. Add the other trades involved and the blended wage index for Abilene is 0.84 (US = 1.00), which puts labor at 49% of the total.
Materials are scaled with BEA's regional price parity for goods. Abilene is at 93.8 against 100 for the US, so a materials line of $650 nationally becomes $610 here (midpoint, 60 linear ft). Permits follow the all-items index of 90.4: $0 to $0.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Abilene. The wage table below marks each row.
Abilene: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Abilene. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from short run (30 linear ft) to long run (120 linear ft).
Basic
$530 to $1,050
Shallow yard drain, easy digging
Standard
$930 to $1,450
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,350 to $1,850
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $270 – $530 | $470 – $730 | $660 – $930 |
| side yard (60 linear ft) | $530 – $1,050 | $930 – $1,450 | $1,350 – $1,850 |
| long run (120 linear ft) | $1,050 – $2,150 | $1,850 – $2,950 | $2,650 – $3,700 |
What local crews earn in Abilene
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Abilene the blend is 0.84.
For construction laborers (47-2061, weighted 50%) the local median is $18.35 an hour, which is 19% below the national $22.66. The middle half of them earn between $16.82 and $22.01 an hour. BLS counts 570 of them working in the area, 75.9 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $23.80 an hour, 17% below the US median of $28.78. The middle half of them earn between $21.07 and $28.74 an hour. About 230 work in the metro. That is 30.6 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Abilene metro, so we used the Texas statewide median: $21.93 an hour against $23.56 for the US. The middle half of them earn between $19.17 and $23.79 an hour.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $55 to the midpoint estimate; the 25th percentile takes off about $25. That is a swing of roughly 2.0% to 4.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Abilene has 75,070 jobs in total (BLS, May 2025), ranking 246th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $16.82 | $18.35 | $22.01 | $22.66 | 0.81 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $21.07 | $23.80 | $28.74 | $28.78 | 0.83 | metro |
| Pipelayers (47-2151) | 20% | $19.17 | $21.93 | $23.79 | $23.56 | 0.93 | state |
| Blended | 100% | 0.84 | |||||
Abilene weather and the french drain calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Abilene Rgnl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Abilene are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Abilene gets about 25 inches of precipitation in a normal year, including roughly 4 inches of snow. The wettest months are May, June and October (3.4 inches in June). Inside the workable window, January and December are the driest, at 1.1 and 1.3 inches. The station averages about 102 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 34 | 1.1 | Workable |
| Feb | 63 | 37 | 1.3 | Workable |
| Mar | 71 | 45 | 1.7 | Workable |
| Apr | 79 | 53 | 1.9 | Workable |
| May | 86 | 62 | 3.2 | Workable |
| Jun | 93 | 70 | 3.4 | Hot |
| Jul | 96 | 73 | 1.9 | Hot |
| Aug | 96 | 72 | 2.5 | Hot |
| Sep | 89 | 65 | 2.7 | Workable |
| Oct | 79 | 55 | 2.8 | Workable |
| Nov | 68 | 43 | 1.4 | Workable |
| Dec | 59 | 35 | 1.3 | Workable |
Related projects, priced for Abilene
Jobs that often go together with French drain are priced below at their usual sizes, using the same Abilene wage and price inputs. Compared with national midpoints, sod installation comes out highest (−9%) and sprinkler system lowest (−13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $6,300 – $12,200 | −10% |
| Gravel driveway | 1,000 sq ft | $2,200 – $8,950 | −12% |
| Sod installation | 1,500 sq ft | $1,350 – $3,000 | −9% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Sprinkler system | 4,000 sq ft of lawn | $3,500 – $8,750 | −13% |
| Inground pool | 450 sq ft | $31,900 – $99,700 | −12% |
How Abilene compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 60 linear ft range from $1,200 to $1,300 across Abilene and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Abilene, TXthis page | $530 – $1,850 | $1,200 | |
| Midland, TX135 miles | $550 – $1,900 | $1,250 | +3% |
| Killeen, TX140 miles | $530 – $1,850 | $1,200 | −1% |
| Lubbock, TX145 miles | $520 – $1,850 | $1,200 | −2% |
| Waco, TX155 miles | $530 – $1,850 | $1,200 | −1% |
| Dallas, TX160 miles | $580 – $2,050 | $1,300 | +9% |
| Texas (statewide) | $550 – $1,950 | $1,250 | +4% |
| United States | $600 – $2,100 | $1,350 | +13% |
Out of the 300 metros we cover, Abilene ranks #270 for the cost of this job (#1 is the most expensive). Statewide, Abilene is 4% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $580 – $2,050 | $1,300 | +9% |
| Houston, TX | 3,289,720 jobs | $560 – $1,950 | $1,250 | +6% |
| Austin, TX | 1,293,690 jobs | $560 – $1,950 | $1,250 | +5% |
| San Antonio, TX | 1,126,880 jobs | $530 – $1,850 | $1,200 | level |
| El Paso, TX | 339,120 jobs | $510 – $1,800 | $1,150 | −4% |
| McAllen, TX | 296,700 jobs | $490 – $1,750 | $1,100 | −7% |
Metros of a similar size
Big cities and small ones price differently, so here is Abilene against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Kenosha, WI | 75,450 jobs | $700 – $2,450 | $1,550 | +31% |
| Sioux City, IA | 75,010 jobs | $590 – $2,100 | $1,350 | +11% |
| Warner Robins, GA | 76,050 jobs | $540 – $1,900 | $1,200 | +1% |
| Blacksburg, VA | 74,070 jobs | $560 – $1,950 | $1,250 | +5% |
Why two Abilene quotes can differ
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Depth and soil
Rocky or clay soil and long trenches raise excavation time.
Crawl space drains
A crawl space French drain is $2,000-$8,000 installed.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $930 to $1,450 for Abilene, TX is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Abilene, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Abilene: your questions
+How much does it cost to install a French drain in Abilene?
For 60 linear ft, expect $530 to $1,850 in the Abilene area. A standard-spec job lands at $930 to $1,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Abilene?
About $8.85 to $31 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Abilene or Midland?
Midland is 135 miles away. The midpoint for 60 linear ft there is $1,250, which is 3% more than Abilene ($1,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Abilene?
About 49% at the midpoint, or $590 out of $1,200. Materials are 51% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Abilene?
$530 to $1,850. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Abilene?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Abilene area (our national range of $0 to $0 scaled by the local price level).
+Is Abilene expensive for French drain compared with the rest of Texas?
Abilene is 4% below the Texas statewide estimate ($1,250 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do construction laborers earn in Abilene?
The BLS median is $18.35 an hour in the Abilene area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.82 to $22.01.
+What do basic and premium French drain work cost in Abilene?
For 60 linear ft, basic work runs $530 to $1,050 and premium work $1,350 to $1,850. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Abilene?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. January and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Abilene
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.