Skip to content
CostLocal

French drain cost in Sioux City, IA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (60 linear ft)
$590 – $2,100
Per linear ft
$9.90 – $34.50
before permit
Versus US midpoint
−1%
US $1,350
Rank of 300 metros
#156
1 = most expensive

A French drain in Sioux City, IA usually costs $590 to $2,100 for 60 linear ft. That works out to about $9.90 to $34.50 per linear ft before permits. That is within a few percent of the national midpoint, so there is little local premium or discount. Building materials run about 6% below the US average here (BEA goods price index 94.0).

Estimate your french drain cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard drain with fabric, gravel and a pop-up outlet

Estimated cost for 60 linear ft in Sioux City, IA, standard level

$1,050 to $1,650

About $17.50 to $27 per linear ft before permits. Labor is about 54% of the bill.

Cost breakdown
PartLowHigh
Materials$470$740
Labor$560$890
Permits and fees$0$0
Total$1,050$1,650
Save and get a PDF report

Cost breakdown for 60 linear ft in Sioux City, IA

Part of the jobLowMidpointHighShare
Materials$270$610$95046%
Labor$320$720$1,15054%
Permits and fees$0$0$00%
Total$590$1,350$2,100100%

Where the Sioux City price comes from

The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $23.38 an hour. Add the other trades involved and the blended wage index for Sioux City is 1.03 (US = 1.00), which puts labor at 54% of the total.

Materials are scaled with BEA's regional price parity for goods. Sioux City is at 94.0 against 100 for the US, so a materials line of $650 nationally becomes $610 here (midpoint, 60 linear ft). Permits follow the all-items index of 86.5: $0 to $0.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Sioux City. The wage table below marks each row.

Sioux City against nearby metros and the rest of Iowa

Same job, same size (60 linear ft), priced for the nearest metros. Waterloo is the priciest of the group at $1,500. Lincoln is the cheapest at $1,300.

Comparison with nearby areas
AreaRangeMidpointvs. here
Sioux City, IAthis page$590 – $2,100$1,350
Sioux Falls, SD75 miles$590 – $2,050$1,300−1%
Omaha, NE85 miles$590 – $2,100$1,350level
Lincoln, NE120 miles$580 – $2,000$1,300−2%
Des Moines, IA145 miles$600 – $2,100$1,350+2%
Waterloo, IA195 miles$660 – $2,300$1,500+11%
Iowa (statewide)$590 – $2,100$1,350level
United States$600 – $2,100$1,350+1%

Out of the 300 metros we cover, Sioux City ranks #156 for the cost of this job (#1 is the most expensive). Statewide, Sioux City is 0% below the Iowa figure.

Elsewhere in Iowa

Iowa metros compared with Sioux City
MetroSizeRangeMidpointvs. here
Des Moines, IA404,130 jobs$600 – $2,100$1,350+2%
Davenport, IA180,450 jobs$620 – $2,150$1,400+5%
Cedar Rapids, IA139,260 jobs$600 – $2,100$1,350+1%
Iowa City, IA93,760 jobs$590 – $2,050$1,350level
Waterloo, IA84,260 jobs$660 – $2,300$1,500+11%
Dubuque, IA58,470 jobs$600 – $2,100$1,350+1%

Metros of a similar size

Big cities and small ones price differently, so here is Sioux City against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Abilene, TX75,070 jobs$530 – $1,850$1,200−10%
Blacksburg, VA74,070 jobs$560 – $1,950$1,250−6%
Kenosha, WI75,450 jobs$700 – $2,450$1,550+17%
Rapid City, SD73,820 jobs$590 – $2,050$1,300−1%

What nearby projects cost in Sioux City

Jobs that often go together with French drain are priced below at their usual sizes, using the same Sioux City wage and price inputs. Compared with national midpoints, retaining wall comes out highest (level) and concrete slab lowest (−4%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Retaining wall200 sq ft of wall face$7,150 – $13,300level
Gravel driveway1,000 sq ft$2,450 – $9,900−3%
Sod installation1,500 sq ft$1,450 – $3,150−4%
Concrete slab400 sq ft$2,350 – $4,950−4%
Sprinkler system4,000 sq ft of lawn$3,850 – $9,650−3%
Inground pool450 sq ft$35,600 – $111,000−1%

Why two Sioux City quotes can differ

  • Crawl space drains

    A crawl space French drain is $2,000-$8,000 installed.

  • Exterior versus interior

    A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).

  • Where the water goes

    A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.

What local crews earn in Sioux City

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Sioux City the blend is 1.03.

For construction laborers (47-2061, weighted 50%) the local median is $23.38 an hour, which is 3% above the national $22.66. The middle half of them earn between $21.71 and $28.72 an hour. BLS counts 560 of them working in the area, 74.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $28.43 an hour, in line with the US median of $28.78. The middle half of them earn between $24.63 and $30.32 an hour. About 200 work in the metro. That is 26.7 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Sioux City metro, so we used the Iowa statewide median: $25.96 an hour against $23.56 for the US. The middle half of them earn between $24.13 and $27.79 an hour.

A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $85 to the midpoint estimate; the 25th percentile takes off about $25. That is a swing of roughly 1.9% to 6.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Sioux City has 75,010 jobs in total (BLS, May 2025), ranking 247th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$21.71$23.38$28.72$22.661.03metro
Operating engineers and other construction equipment operators (47-2073)30%$24.63$28.43$30.32$28.780.99metro
Pipelayers (47-2151)20%$24.13$25.96$27.79$23.561.10state
Blended100%1.03

Pick a size, pick a tier: french drain pricing in Sioux City

The cited range is split into basic, standard and premium bands, then scaled to Sioux City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from short run (30 linear ft) to long run (120 linear ft).

Basic

$590 to $1,200

Shallow yard drain, easy digging

Standard

$1,050 to $1,650

Standard drain with fabric, gravel and a pop-up outlet

Premium

$1,500 to $2,100

Deep or long drain, hard soil, dry well or sump discharge

Cost by size and quality level
SizeBasicStandardPremium
short run (30 linear ft)$300 – $590$520 – $820$740 – $1,050
side yard (60 linear ft)$590 – $1,200$1,050 – $1,650$1,500 – $2,100
long run (120 linear ft)$1,200 – $2,350$2,100 – $3,250$2,950 – $4,150

Sioux City weather and the french drain calendar

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Sioux City Gateway Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For digging, grading and setting material in the ground, the comfortable months in Sioux City are April through October: 7 of 12. Outside them, January, February, March, November and December have an average overnight low at or below freezing (32°F).

In January, February, March, November and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 154 days a year with a low at or below 32°F at this station.

Sioux City gets about 29 inches of precipitation in a normal year, including roughly 36 inches of snow. The wettest months are May, June and August (4.3 inches in June). Inside the workable window, September and October are the driest, at 2.8 and 2.2 inches. The station averages about 25 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Sioux City Gateway Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan30100.7Cold
Feb34150.9Cold
Mar48261.8Cold
Apr61373.1Workable
May72493.9Workable
Jun82594.3Workable
Jul85633.4Workable
Aug83613.9Workable
Sep77512.8Workable
Oct63382.2Workable
Nov47251.3Cold
Dec33151.0Cold

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,050 to $1,650 for Sioux City, IA is attached.

Detailed french drain report for Sioux City, IA, $9

The report lays out the french drain numbers for Sioux City, IA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

French drain in Sioux City: your questions

+How much does it cost to install a French drain in Sioux City?

For 60 linear ft, expect $590 to $2,100 in the Sioux City area. A standard-spec job lands at $1,050 to $1,650. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for French drain in Sioux City?

About $9.90 to $34.50 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.

+Is French drain cheaper in Sioux City or Sioux Falls?

Sioux Falls is 75 miles away. The midpoint for 60 linear ft there is $1,300, which is 1% less than Sioux City ($1,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Sioux City?

About 54% at the midpoint, or $720 out of $1,350. Materials are 46% and permits 0%. Nationally, labor is 52%.

+What would side yard (60 linear ft) cost in Sioux City?

$590 to $2,100. Pick a different size in the estimator above to get your own number.

+Does French drain need a permit in Sioux City?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Sioux City area (our national range of $0 to $0 scaled by the local price level).

+Is Sioux City expensive for French drain compared with the rest of Iowa?

Sioux City is 0% below the Iowa statewide estimate ($1,350 at the midpoint). We cover 7 metros in Iowa; see the state page to compare them.

+What do construction laborers earn in Sioux City?

The BLS median is $23.38 an hour in the Sioux City area, compared with $22.66 nationally. The 25th to 75th percentile range is $21.71 to $28.72.

+What do basic and premium French drain work cost in Sioux City?

For 60 linear ft, basic work runs $590 to $1,200 and premium work $1,500 to $2,100. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.

+When is the best time to install a French drain in Sioux City?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

French drain near Sioux City

French drain: all pricesFrench drain in IowaAll projects in Sioux CityIowa cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.