French drain cost in Lubbock, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $520 – $1,850
- Per linear ft
- $8.70 – $30.50
- before permit
- Versus US midpoint
- −13%
- US $1,350
- Rank of 300 metros
- #284
- 1 = most expensive
Local price for a French drain in the Lubbock area: $520 to $1,850 for 60 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 13% lower than the US figure. Construction laborers earn a median of $17.78 an hour in the Lubbock area, 22% below the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Lubbock, TX, standard level
$920 to $1,450
About $15.50 to $24 per linear ft before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $470 | $740 |
| Labor | $440 | $700 |
| Permits and fees | $0 | $0 |
| Total | $920 | $1,450 |
Cost breakdown for 60 linear ft in Lubbock, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $270 | $610 | $950 | 52% |
| Labor | $250 | $570 | $890 | 48% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $520 | $1,200 | $1,850 | 100% |
What is behind the Lubbock number
We price the labor side from BLS wage data for 3 trades: construction laborers at 50%, operating engineers and other construction equipment operators at 30%, pipelayers at 20%. Weighted together, Lubbock wages are 0.81 times the national level. Labor makes up about 48% of the midpoint estimate (52% at national prices).
Materials are scaled with BEA's regional price parity for goods. Lubbock is at 93.8 against 100 for the US, so a materials line of $650 nationally becomes $610 here (midpoint, 60 linear ft). Permits follow the all-items index of 91.3: $0 to $0.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Lubbock. The wage table below marks each row.
Is Lubbock cheap or dear? The local comparison
Same job, same size (60 linear ft), priced for the nearest metros. Midland is the priciest of the group at $1,250. El Paso is the cheapest at $1,150.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lubbock, TXthis page | $520 – $1,850 | $1,200 | |
| Midland, TX95 miles | $550 – $1,900 | $1,250 | +5% |
| Odessa, TX115 miles | $540 – $1,900 | $1,200 | +3% |
| Amarillo, TX125 miles | $530 – $1,850 | $1,200 | +1% |
| Abilene, TX145 miles | $530 – $1,850 | $1,200 | +2% |
| El Paso, TX250 miles | $510 – $1,800 | $1,150 | −3% |
| Texas (statewide) | $550 – $1,950 | $1,250 | +6% |
| United States | $600 – $2,100 | $1,350 | +15% |
Out of the 300 metros we cover, Lubbock ranks #284 for the cost of this job (#1 is the most expensive). Statewide, Lubbock is 6% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $580 – $2,050 | $1,300 | +11% |
| Houston, TX | 3,289,720 jobs | $560 – $1,950 | $1,250 | +8% |
| Austin, TX | 1,293,690 jobs | $560 – $1,950 | $1,250 | +6% |
| San Antonio, TX | 1,126,880 jobs | $530 – $1,850 | $1,200 | +2% |
| El Paso, TX | 339,120 jobs | $510 – $1,800 | $1,150 | −3% |
| McAllen, TX | 296,700 jobs | $490 – $1,750 | $1,100 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Lubbock against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlantic City, NJ | 168,700 jobs | $690 – $2,400 | $1,550 | +32% |
| Peoria, IL | 166,020 jobs | $680 – $2,350 | $1,500 | +29% |
| Fort Collins, CO | 169,430 jobs | $610 – $2,150 | $1,400 | +17% |
| Montgomery, AL | 165,550 jobs | $530 – $1,850 | $1,200 | level |
Planning more than one job in Lubbock?
Jobs that often go together with French drain are priced below at their usual sizes, using the same Lubbock wage and price inputs. Compared with national midpoints, sod installation comes out highest (−10%) and sprinkler system lowest (−15%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $6,000 – $11,800 | −13% |
| Gravel driveway | 1,000 sq ft | $2,150 – $8,750 | −14% |
| Sod installation | 1,500 sq ft | $1,350 – $2,950 | −10% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Sprinkler system | 4,000 sq ft of lawn | $3,400 – $8,550 | −15% |
| Inground pool | 450 sq ft | $30,900 – $96,700 | −14% |
Specs and site conditions that change a Lubbock bid
Crawl space drains
A crawl space French drain is $2,000-$8,000 installed.
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Who does the work: Lubbock trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lubbock the blend is 0.81.
For construction laborers (47-2061, weighted 50%) the local median is $17.78 an hour, which is 22% below the national $22.66. The middle half of them earn between $16.45 and $21.13 an hour. BLS counts 980 of them working in the area, 58.8 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $22.35 an hour, 22% below the US median of $28.78. The middle half of them earn between $21.37 and $27.40 an hour. About 550 work in the metro. That is 33.0 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Lubbock metro, so we used the Texas statewide median: $21.93 an hour against $23.56 for the US. The middle half of them earn between $19.17 and $23.79 an hour.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $50 to the midpoint estimate; the 25th percentile takes off about $20. That is a swing of roughly 1.8% to 4.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lubbock has 166,780 jobs in total (BLS, May 2025), ranking 140th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $16.45 | $17.78 | $21.13 | $22.66 | 0.78 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $21.37 | $22.35 | $27.40 | $28.78 | 0.78 | metro |
| Pipelayers (47-2151) | 20% | $19.17 | $21.93 | $23.79 | $23.56 | 0.93 | state |
| Blended | 100% | 0.81 | |||||
The best months for French drain in Lubbock
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Lubbock Wfo (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Lubbock are March through May and September through November: 6 of 12. Outside them, January, February and December have an average overnight low at or below freezing (32°F), and June, July and August have an average daytime high of 90°F or more.
In January, February and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 61 days a year with a low at or below 32°F at this station.
Lubbock gets about 19 inches of precipitation in a normal year. The wettest months are May, June and September (2.7 inches in June). Inside the workable window, March and November are the driest, at 1.2 and 0.8 inches. The station averages about 91 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 55 | 30 | 0.7 | Cold |
| Feb | 59 | 32 | 0.6 | Cold |
| Mar | 68 | 39 | 1.2 | Workable |
| Apr | 76 | 48 | 1.4 | Workable |
| May | 84 | 57 | 2.6 | Workable |
| Jun | 91 | 66 | 2.7 | Hot |
| Jul | 93 | 70 | 2.2 | Hot |
| Aug | 91 | 69 | 2.0 | Hot |
| Sep | 84 | 61 | 2.6 | Workable |
| Oct | 76 | 50 | 1.7 | Workable |
| Nov | 64 | 38 | 0.8 | Workable |
| Dec | 55 | 30 | 0.8 | Cold |
Lubbock: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Lubbock. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from short run (30 linear ft) to long run (120 linear ft).
Basic
$520 to $1,050
Shallow yard drain, easy digging
Standard
$920 to $1,450
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,300 to $1,850
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $260 – $520 | $460 – $720 | $650 – $920 |
| side yard (60 linear ft) | $520 – $1,050 | $920 – $1,450 | $1,300 – $1,850 |
| long run (120 linear ft) | $1,050 – $2,100 | $1,850 – $2,900 | $2,600 – $3,650 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $920 to $1,450 for Lubbock, TX is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Lubbock, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Lubbock: your questions
+How much does it cost to install a French drain in Lubbock?
For 60 linear ft, expect $520 to $1,850 in the Lubbock area. A standard-spec job lands at $920 to $1,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Lubbock?
About $8.70 to $30.50 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Lubbock or Midland?
Midland is 95 miles away. The midpoint for 60 linear ft there is $1,250, which is 5% more than Lubbock ($1,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lubbock?
About 48% at the midpoint, or $570 out of $1,200. Materials are 52% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Lubbock?
$520 to $1,850. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Lubbock?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Lubbock area (our national range of $0 to $0 scaled by the local price level).
+Is Lubbock expensive for French drain compared with the rest of Texas?
Lubbock is 6% below the Texas statewide estimate ($1,250 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do construction laborers earn in Lubbock?
The BLS median is $17.78 an hour in the Lubbock area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.45 to $21.13.
+What do basic and premium French drain work cost in Lubbock?
For 60 linear ft, basic work runs $520 to $1,050 and premium work $1,300 to $1,850. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Lubbock?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through May and September through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Lubbock
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.