Skip to content
CostLocal

French drain cost in Amarillo, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (60 linear ft)
$530 – $1,850
Per linear ft
$8.85 – $31
before permit
Versus US midpoint
−12%
US $1,350
Rank of 300 metros
#271
1 = most expensive

If you want to install a French drain in Amarillo, plan on $530 to $1,850 for 60 linear ft, all in. Per linear ft, that is $8.85 to $31 for materials and labor, with the permit on top. The local midpoint runs 12% lower than the national one. Construction laborers earn a median of $18.35 an hour in the Amarillo area, 19% below the US median of $22.66.

Estimate your french drain cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard drain with fabric, gravel and a pop-up outlet

Estimated cost for 60 linear ft in Amarillo, TX, standard level

$930 to $1,450

About $15.50 to $24.50 per linear ft before permits. Labor is about 49% of the bill.

Cost breakdown
PartLowHigh
Materials$470$740
Labor$460$720
Permits and fees$0$0
Total$930$1,450
Save and get a PDF report

Cost breakdown for 60 linear ft in Amarillo, TX

Part of the jobLowMidpointHighShare
Materials$270$610$95051%
Labor$260$590$91049%
Permits and fees$0$0$00%
Total$530$1,200$1,850100%

Why Amarillo prices look the way they do

The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $18.35 an hour. Add the other trades involved and the blended wage index for Amarillo is 0.84 (US = 1.00), which puts labor at 49% of the total.

On the materials line, the BEA goods price index for the Amarillo metro is 93.8 (US = 100). The midpoint materials bill for 60 linear ft comes to $610, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (91.8) and land at $0 to $0.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Amarillo. The wage table below marks each row.

French drain: what moves the price in Amarillo

  • Exterior versus interior

    A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).

  • Where the water goes

    A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.

  • Depth and soil

    Rocky or clay soil and long trenches raise excavation time.

Cost by quality level and size in Amarillo

Three bands are cut from the same cited range and localized for Amarillo wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$530 to $1,050

Shallow yard drain, easy digging

Standard

$930 to $1,450

Standard drain with fabric, gravel and a pop-up outlet

Premium

$1,350 to $1,850

Deep or long drain, hard soil, dry well or sump discharge

Cost by size and quality level
SizeBasicStandardPremium
short run (30 linear ft)$270 – $530$460 – $730$660 – $930
side yard (60 linear ft)$530 – $1,050$930 – $1,450$1,350 – $1,850
long run (120 linear ft)$1,050 – $2,100$1,850 – $2,900$2,650 – $3,700

Amarillo labor market for French drain

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Amarillo is 0.84 times the national level.

Construction laborers (47-2061), 50% of the weighting: a median of $18.35 an hour, 19% below the US median of $22.66. The middle half of them earn between $16.77 and $21.85 an hour. About 970 work in the metro. That is 78.3 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.48 an hour, which is 18% below the national $28.78. The middle half of them earn between $21.41 and $28.73 an hour. BLS counts 490 of them working in the area, 39.5 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Amarillo metro, so we used the Texas statewide median: $21.93 an hour against $23.56 for the US. The middle half of them earn between $19.17 and $23.79 an hour.

Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($21.85 an hour) instead of the median, the labor line grows by about $55. At the 25th percentile ($16.77) it shrinks by about $25. The total moves by 4.5% or 2.0%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 123,930 jobs in the Amarillo area. That makes it the 175th largest of the 300 metros we cover, with 0.08% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$16.77$18.35$21.85$22.660.81metro
Operating engineers and other construction equipment operators (47-2073)30%$21.41$23.48$28.73$28.780.82metro
Pipelayers (47-2151)20%$19.17$21.93$23.79$23.560.93state
Blended100%0.84

Planning more than one job in Amarillo?

Because every project leans on different trades, Amarillo's wage level does not move all prices equally. Against the US midpoint, sod installation runs −10% and gravel driveway −12%.

Related projects with local prices
ProjectSizeRangevs. US
Retaining wall200 sq ft of wall face$6,300 – $12,200−10%
Gravel driveway1,000 sq ft$2,200 – $8,950−12%
Sod installation1,500 sq ft$1,350 – $3,000−10%
Concrete slab400 sq ft$2,150 – $4,600−12%
Sprinkler system4,000 sq ft of lawn$3,550 – $8,850−11%
Inground pool450 sq ft$32,000 – $99,900−11%

Amarillo against nearby metros and the rest of Texas

Same job, same size (60 linear ft), priced for the nearest metros. Santa Fe is the priciest of the group at $1,250. Lubbock is the cheapest at $1,200.

Comparison with nearby areas
AreaRangeMidpointvs. here
Amarillo, TXthis page$530 – $1,850$1,200
Lubbock, TX125 miles$520 – $1,850$1,200−1%
Midland, TX220 miles$550 – $1,900$1,250+3%
Santa Fe, NM230 miles$560 – $1,950$1,250+5%
Abilene, TX230 miles$530 – $1,850$1,200level
Odessa, TX235 miles$540 – $1,900$1,200+1%
Texas (statewide)$550 – $1,950$1,250+4%
United States$600 – $2,100$1,350+13%

Across 300 US metros, Amarillo comes in at #271 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Amarillo is 4% below the Texas figure.

Other Texas metros

Texas metros compared with Amarillo
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$580 – $2,050$1,300+10%
Houston, TX3,289,720 jobs$560 – $1,950$1,250+6%
Austin, TX1,293,690 jobs$560 – $1,950$1,250+5%
San Antonio, TX1,126,880 jobs$530 – $1,850$1,200level
El Paso, TX339,120 jobs$510 – $1,800$1,150−4%
McAllen, TX296,700 jobs$490 – $1,750$1,100−7%

Cities with a workforce like Amarillo's

Big cities and small ones price differently, so here is Amarillo against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Appleton, WI124,230 jobs$710 – $2,450$1,600+33%
Rochester, MN122,980 jobs$700 – $2,450$1,600+32%
Duluth, MN124,710 jobs$700 – $2,450$1,550+32%
Midland, TX122,180 jobs$550 – $1,900$1,250+3%

Climate in Amarillo: timing your French drain job

We use NOAA's 1991-2020 climate normals for Amarillo (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through May and September through November are the stretches where digging, grading and setting material in the ground runs into the fewest weather problems in Amarillo (6 of 12 months). January, February and December have an average overnight low at or below freezing (32°F); June, July and August have an average daytime high of 90°F or more.

In January, February and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 108 days a year with a low at or below 32°F at this station.

Amarillo gets about 20 inches of precipitation in a normal year, including roughly 17 inches of snow. The wettest months are June, July and August (2.9 inches in August). Inside the workable window, March and November are the driest, at 1.3 and 0.8 inches. The station averages about 72 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Amarillo (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan52250.7Cold
Feb56280.5Cold
Mar65351.3Workable
Apr72431.4Workable
May81532.3Workable
Jun90622.9Hot
Jul93662.8Hot
Aug91652.9Hot
Sep84581.7Workable
Oct73451.8Workable
Nov61340.8Workable
Dec52260.7Cold

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $930 to $1,450 for Amarillo, TX is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Amarillo, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

French drain in Amarillo: your questions

+How much does it cost to install a French drain in Amarillo?

For 60 linear ft, expect $530 to $1,850 in the Amarillo area. A standard-spec job lands at $930 to $1,450. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for French drain in Amarillo?

About $8.85 to $31 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.

+Is French drain cheaper in Amarillo or Lubbock?

Lubbock is 125 miles away. The midpoint for 60 linear ft there is $1,200, which is 1% less than Amarillo ($1,200). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Amarillo?

About 49% at the midpoint, or $590 out of $1,200. Materials are 51% and permits 0%. Nationally, labor is 52%.

+What would side yard (60 linear ft) cost in Amarillo?

$530 to $1,850. Pick a different size in the estimator above to get your own number.

+Does French drain need a permit in Amarillo?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Amarillo area (our national range of $0 to $0 scaled by the local price level).

+Is Amarillo expensive for French drain compared with the rest of Texas?

Amarillo is 4% below the Texas statewide estimate ($1,250 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do construction laborers earn in Amarillo?

The BLS median is $18.35 an hour in the Amarillo area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.77 to $21.85.

+What do basic and premium French drain work cost in Amarillo?

For 60 linear ft, basic work runs $530 to $1,050 and premium work $1,350 to $1,850. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.

+When is the best time to install a French drain in Amarillo?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through May and September through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

French drain near Amarillo

French drain: all pricesFrench drain in TexasAll projects in AmarilloTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.