Gutters cost in Huntington, WV
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,300 – $4,150
- Per linear ft
- $8 – $24.50
- before permit
- Versus US midpoint
- −1%
- US $2,750
- Rank of 300 metros
- #127
- 1 = most expensive
Local price for new gutters in the Huntington area: $1,300 to $4,150 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.3).
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Huntington, WV, standard level
$2,150 to $3,250
About $13 to $19.50 per linear ft before permits. Labor is about 40% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $910 | $1,250 |
| Permits and fees | $55 | $120 |
| Total | $2,150 | $3,250 |
Cost breakdown for 160 linear ft in Huntington, WV
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 57% |
| Labor | $660 | $1,050 | $1,500 | 40% |
| Permits and fees | $0 | $90 | $180 | 3% |
| Total | $1,300 | $2,700 | $4,150 | 100% |
Where the Huntington price comes from
The wage side of the estimate leans on sheet metal workers, who do 40% of the hours on a typical job. Their local median is $35.56 an hour. Add the other trades involved and the blended wage index for Huntington is 1.03 (US = 1.00), which puts labor at 40% of the total.
Materials are scaled with BEA's regional price parity for goods. Huntington is at 96.3 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 160 linear ft). Permits follow the all-items index of 88.4: $0 to $180.
Planning more than one job in Huntington?
Jobs that often go together with gutters are priced below at their usual sizes, using the same Huntington wage and price inputs. Compared with national midpoints, French drain comes out highest (−2%) and attic insulation lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,550 – $11,500 | −8% |
| Metal roof | 2,000 sq ft of roof | $9,700 – $31,100 | −4% |
| Vinyl siding | 2,100 sq ft of wall | $7,900 – $23,800 | −6% |
| French drain | 60 linear ft | $590 – $2,050 | −2% |
| Attic insulation | 1,000 sq ft | $870 – $3,600 | −11% |
Huntington against nearby metros and the rest of West Virginia
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,550 to $2,800 across Huntington and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Huntington, WVthis page | $1,300 – $4,150 | $2,700 | |
| Charleston, WV60 miles | $1,250 – $4,100 | $2,700 | level |
| Lexington, KY100 miles | $1,200 – $4,000 | $2,600 | −3% |
| Columbus, OH110 miles | $1,350 – $4,250 | $2,800 | +3% |
| Cincinnati, OH115 miles | $1,300 – $4,150 | $2,750 | +1% |
| Kingsport, TN120 miles | $1,200 – $3,900 | $2,550 | −6% |
| West Virginia (statewide) | $1,250 – $4,100 | $2,700 | level |
| United States | $1,300 – $4,200 | $2,750 | +1% |
Out of the 300 metros we cover, Huntington ranks #127 for the cost of this job (#1 is the most expensive). Statewide, Huntington is 0% above the West Virginia figure.
Elsewhere in West Virginia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charleston, WV | 103,450 jobs | $1,250 – $4,100 | $2,700 | level |
| Morgantown, WV | 67,370 jobs | $1,250 – $4,150 | $2,700 | level |
| Wheeling, WV | 58,130 jobs | $1,300 – $4,200 | $2,750 | +3% |
Metros of a similar size
Big cities and small ones price differently, so here is Huntington against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Vallejo, CA | 144,130 jobs | $1,400 – $4,600 | $3,000 | +11% |
| Cedar Rapids, IA | 139,260 jobs | $1,300 – $4,150 | $2,750 | +1% |
| Myrtle Beach, SC | 146,260 jobs | $1,150 – $3,800 | $2,450 | −9% |
| Rockford, IL | 137,650 jobs | $1,400 – $4,350 | $2,850 | +6% |
Gutters: what moves the price in Huntington
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Who does the work: Huntington trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Huntington the blend is 1.03.
Sheet metal workers (47-2211), 40% of the weighting: a median of $35.56 an hour, 20% above the US median of $29.71. The middle half of them earn between $22.48 and $35.78 an hour. About 130 work in the metro. That is 9.2 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $23.54 an hour, 12% below the US median of $26.65. The middle half of them earn between $17.50 and $31.51 an hour. About 110 work in the metro. That is 7.8 per 10,000 jobs, compared with 8.7 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $21.72 an hour, which is 4% below the national $22.66. The middle half of them earn between $17.76 and $28.49 an hour. BLS counts 1,580 of them working in the area, 112.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $5 to the midpoint estimate; the 25th percentile takes off about $180. That is a swing of roughly 6.8% to 0.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Huntington-Ashland has 140,740 jobs in total (BLS, May 2025), ranking 159th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.48 | $35.56 | $35.78 | $29.71 | 1.20 | metro |
| Roofers (47-2181) | 30% | $17.50 | $23.54 | $31.51 | $26.65 | 0.88 | metro |
| Construction laborers (47-2061) | 30% | $17.76 | $21.72 | $28.49 | $22.66 | 0.96 | metro |
| Blended | 100% | 1.03 | |||||
Cost by quality level and size in Huntington
The cited range is split into basic, standard and premium bands, then scaled to Huntington. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,300 to $2,400
Vinyl or sectional aluminum, single story
Standard
$2,150 to $3,250
Seamless aluminum K-style, standard downspouts
Premium
$3,000 to $4,150
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $960 – $1,850 | $1,600 – $2,500 | $2,250 – $3,150 |
| average house (160 linear ft) | $1,300 – $2,400 | $2,150 – $3,250 | $3,000 – $4,150 |
| large house (240 linear ft) | $1,900 – $3,600 | $3,150 – $4,850 | $4,450 – $6,100 |
The best months for gutters in Huntington
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Huntington Tri State Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Huntington are February through December: 11 of 12. Outside them, January has an average daytime high under 45°F.
In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Huntington gets about 45 inches of precipitation in a normal year, including roughly 20 inches of snow. The wettest months are May, June and July (5.1 inches in July). Inside the workable window, October and November are the driest, at 3.0 and 3.1 inches. The station averages about 25 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 43 | 26 | 3.1 | Cold |
| Feb | 47 | 29 | 3.4 | Workable |
| Mar | 57 | 36 | 4.2 | Workable |
| Apr | 69 | 46 | 3.9 | Workable |
| May | 76 | 54 | 4.5 | Workable |
| Jun | 83 | 62 | 4.2 | Workable |
| Jul | 86 | 66 | 5.1 | Workable |
| Aug | 86 | 65 | 4.0 | Workable |
| Sep | 80 | 58 | 3.2 | Workable |
| Oct | 69 | 46 | 3.0 | Workable |
| Nov | 57 | 37 | 3.1 | Workable |
| Dec | 47 | 30 | 3.6 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,150 to $3,250 for Huntington, WV is attached.
Detailed gutters report for Huntington, WV, $9
The report lays out the gutters numbers for Huntington, WV line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Huntington: your questions
+How much does it cost to install gutters in Huntington?
For 160 linear ft, expect $1,300 to $4,150 in the Huntington area. A standard-spec job lands at $2,150 to $3,250. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Huntington?
About $8 to $24.50 per linear ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Huntington or Charleston?
Charleston is 60 miles away. The midpoint for 160 linear ft there is $2,700, which is 0% less than Huntington ($2,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Huntington?
About 40% at the midpoint, or $1,050 out of $2,700. Materials are 57% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Huntington?
$1,300 to $4,150. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Huntington?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Huntington area (our national range of $0 to $200 scaled by the local price level).
+Is Huntington expensive for gutters compared with the rest of West Virginia?
Huntington is 0% above the West Virginia statewide estimate ($2,700 at the midpoint). We cover 4 metros in West Virginia; see the state page to compare them.
+What do sheet metal workers earn in Huntington?
The BLS median is $35.56 an hour in the Huntington area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.48 to $35.78.
+What do basic and premium gutters work cost in Huntington?
For 160 linear ft, basic work runs $1,300 to $2,400 and premium work $3,000 to $4,150. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Huntington?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Huntington
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.