Gutters cost in Charleston, WV
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,250 – $4,100
- Per linear ft
- $7.95 – $24.50
- before permit
- Versus US midpoint
- −2%
- US $2,750
- Rank of 300 metros
- #128
- 1 = most expensive
If you want to install gutters in Charleston, plan on $1,250 to $4,100 for 160 linear ft, all in. Per linear ft, that is $7.95 to $24.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Building materials run about 4% below the US average here (BEA goods price index 96.3).
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Charleston, WV, standard level
$2,100 to $3,250
About $13 to $19.50 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $900 | $1,250 |
| Permits and fees | $55 | $120 |
| Total | $2,100 | $3,250 |
Cost breakdown for 160 linear ft in Charleston, WV
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 57% |
| Labor | $650 | $1,050 | $1,450 | 39% |
| Permits and fees | $0 | $90 | $180 | 3% |
| Total | $1,250 | $2,700 | $4,100 | 100% |
Why Charleston prices look the way they do
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Charleston wages are 1.02 times the national level. Labor makes up about 39% of the midpoint estimate (38% at national prices).
On the materials line, the BEA goods price index for the Charleston metro is 96.3 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (88.7) and land at $0 to $180.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Charleston. The wage table below marks each row.
Charleston against nearby metros and the rest of West Virginia
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,450 to $2,750 across Charleston and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Charleston, WVthis page | $1,250 – $4,100 | $2,700 | |
| Huntington, WV60 miles | $1,300 – $4,150 | $2,700 | level |
| Blacksburg, VA95 miles | $1,100 – $3,750 | $2,450 | −9% |
| Roanoke, VA110 miles | $1,150 – $3,800 | $2,450 | −8% |
| Wheeling, WV120 miles | $1,300 – $4,200 | $2,750 | +3% |
| Morgantown, WV125 miles | $1,250 – $4,150 | $2,700 | level |
| West Virginia (statewide) | $1,250 – $4,100 | $2,700 | level |
| United States | $1,300 – $4,200 | $2,750 | +2% |
Across 300 US metros, Charleston comes in at #128 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Charleston is 0% below the West Virginia figure.
Other West Virginia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Huntington, WV | 140,740 jobs | $1,300 – $4,150 | $2,700 | level |
| Morgantown, WV | 67,370 jobs | $1,250 – $4,150 | $2,700 | level |
| Wheeling, WV | 58,130 jobs | $1,300 – $4,200 | $2,750 | +3% |
Cities with a workforce like Charleston's
Big cities and small ones price differently, so here is Charleston against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Gainesville, GA | 103,870 jobs | $1,150 – $3,800 | $2,500 | −8% |
| Clarksville, TN | 103,220 jobs | $1,150 – $3,800 | $2,450 | −8% |
| St. Cloud, MN | 103,920 jobs | $1,400 – $4,450 | $2,950 | +9% |
| Lafayette, IN | 102,200 jobs | $1,200 – $4,000 | $2,600 | −3% |
Cost by quality level and size in Charleston
Three bands are cut from the same cited range and localized for Charleston wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,250 to $2,400
Vinyl or sectional aluminum, single story
Standard
$2,100 to $3,250
Seamless aluminum K-style, standard downspouts
Premium
$3,000 to $4,100
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $950 – $1,800 | $1,600 – $2,500 | $2,250 – $3,150 |
| average house (160 linear ft) | $1,250 – $2,400 | $2,100 – $3,250 | $3,000 – $4,100 |
| large house (240 linear ft) | $1,900 – $3,550 | $3,150 – $4,850 | $4,400 – $6,100 |
Charleston labor market for gutters
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Charleston is 1.02 times the national level.
For sheet metal workers (47-2211, weighted 40%) the local median is $32.69 an hour, which is 10% above the national $29.71. The middle half of them earn between $22.57 and $35.94 an hour. BLS counts 80 of them working in the area, 7.7 for every 10,000 jobs (US: 7.7), so the local bench is about average.
Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the Charleston metro, so we used the West Virginia statewide median: $24.60 an hour against $26.65 for the US. The middle half of them earn between $17.44 and $32.09 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $22.97 an hour, in line with the US median of $22.66. The middle half of them earn between $17.31 and $28.79 an hour. About 660 work in the metro. That is 63.8 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($35.94 an hour) instead of the median, the labor line grows by about $45. At the 25th percentile ($22.57) it shrinks by about $140. The total moves by 1.7% or 5.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 103,450 jobs in the Charleston area. That makes it the 199th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.57 | $32.69 | $35.94 | $29.71 | 1.10 | metro |
| Roofers (47-2181) | 30% | $17.44 | $24.60 | $32.09 | $26.65 | 0.92 | state |
| Construction laborers (47-2061) | 30% | $17.31 | $22.97 | $28.79 | $22.66 | 1.01 | metro |
| Blended | 100% | 1.02 | |||||
Related projects, priced for Charleston
Because every project leans on different trades, Charleston's wage level does not move all prices equally. Against the US midpoint, metal roof runs −4% and attic insulation −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,750 – $11,800 | −6% |
| Metal roof | 2,000 sq ft of roof | $9,800 – $31,300 | −4% |
| Vinyl siding | 2,100 sq ft of wall | $7,800 – $23,500 | −7% |
| French drain | 60 linear ft | $580 – $2,000 | −4% |
| Attic insulation | 1,000 sq ft | $870 – $3,600 | −10% |
Specs and site conditions that change a Charleston bid
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Climate in Charleston: timing your gutters job
We use NOAA's 1991-2020 climate normals for Charleston Yeager Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
February through December is the stretch where exterior installation runs into the fewest weather problems in Charleston (11 of 12 months). January has an average daytime high under 45°F.
In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Charleston gets about 46 inches of precipitation in a normal year, including roughly 32 inches of snow. The wettest months are May, June and July (5.4 inches in July). Inside the workable window, October and November are the driest, at 2.9 and 3.2 inches. The station averages about 24 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 44 | 26 | 3.3 | Cold |
| Feb | 48 | 29 | 3.4 | Workable |
| Mar | 57 | 35 | 4.1 | Workable |
| Apr | 69 | 45 | 3.6 | Workable |
| May | 76 | 53 | 4.9 | Workable |
| Jun | 83 | 62 | 4.7 | Workable |
| Jul | 86 | 66 | 5.4 | Workable |
| Aug | 85 | 64 | 3.8 | Workable |
| Sep | 80 | 57 | 3.5 | Workable |
| Oct | 69 | 45 | 2.9 | Workable |
| Nov | 57 | 36 | 3.2 | Workable |
| Dec | 48 | 30 | 3.6 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,100 to $3,250 for Charleston, WV is attached.
Take this estimate with you: PDF report, $9
The report lays out the gutters numbers for Charleston, WV line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Charleston: your questions
+How much does it cost to install gutters in Charleston?
For 160 linear ft, expect $1,250 to $4,100 in the Charleston area. A standard-spec job lands at $2,100 to $3,250. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Charleston?
About $7.95 to $24.50 per linear ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Charleston or Huntington?
Huntington is 60 miles away. The midpoint for 160 linear ft there is $2,700, which is 0% more than Charleston ($2,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Charleston?
About 39% at the midpoint, or $1,050 out of $2,700. Materials are 57% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Charleston?
$1,250 to $4,100. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Charleston?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Charleston area (our national range of $0 to $200 scaled by the local price level).
+Is Charleston expensive for gutters compared with the rest of West Virginia?
Charleston is 0% below the West Virginia statewide estimate ($2,700 at the midpoint). We cover 4 metros in West Virginia; see the state page to compare them.
+What do sheet metal workers earn in Charleston?
The BLS median is $32.69 an hour in the Charleston area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.57 to $35.94.
+What do basic and premium gutters work cost in Charleston?
For 160 linear ft, basic work runs $1,250 to $2,400 and premium work $3,000 to $4,100. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Charleston?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Charleston
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.