Gutters cost in Gainesville, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,150 – $3,800
- Per linear ft
- $7.10 – $22.50
- before permit
- Versus US midpoint
- −10%
- US $2,750
- Rank of 300 metros
- #253
- 1 = most expensive
New gutters in Gainesville, GA usually costs $1,150 to $3,800 for 160 linear ft. That works out to about $7.10 to $22.50 per linear ft before permits. Compared with the national midpoint that is $260 less. Sheet metal workers earn a median of $23.02 an hour in the Gainesville area, 23% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Gainesville, GA, standard level
$1,950 to $3,000
About $12 to $18 per linear ft before permits. Labor is about 34% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $710 | $970 |
| Permits and fees | $60 | $140 |
| Total | $1,950 | $3,000 |
Cost breakdown for 160 linear ft in Gainesville, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 62% |
| Labor | $520 | $840 | $1,150 | 34% |
| Permits and fees | $0 | $95 | $190 | 4% |
| Total | $1,150 | $2,500 | $3,800 | 100% |
Where the Gainesville price comes from
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Gainesville wages are 0.81 times the national level. Labor makes up about 34% of the midpoint estimate (38% at national prices).
Materials are scaled with BEA's regional price parity for goods. Gainesville is at 96.3 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 160 linear ft). Permits follow the all-items index of 96.8: $0 to $190.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Gainesville. The wage table below marks each row.
Gainesville weather and the gutters calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Gainesville Gilmer Ap (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Gainesville: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Gainesville gets about 52 inches of precipitation in a normal year. The wettest months are January, March and August (5.0 inches in January). The station averages about 35 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 51 | 34 | 5.0 | Workable |
| Feb | 55 | 36 | 4.7 | Workable |
| Mar | 63 | 43 | 4.8 | Workable |
| Apr | 72 | 50 | 4.0 | Workable |
| May | 79 | 58 | 4.0 | Workable |
| Jun | 85 | 66 | 4.2 | Workable |
| Jul | 88 | 70 | 4.4 | Workable |
| Aug | 87 | 69 | 4.7 | Workable |
| Sep | 81 | 63 | 3.9 | Workable |
| Oct | 72 | 52 | 3.9 | Workable |
| Nov | 62 | 42 | 4.2 | Workable |
| Dec | 53 | 36 | 4.7 | Workable |
What local crews earn in Gainesville
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Gainesville the blend is 0.81.
Sheet metal workers (47-2211), 40% of the weighting: a median of $23.02 an hour, 23% below the US median of $29.71. The middle half of them earn between $18.50 and $24.21 an hour. About 50 work in the metro. That is 4.8 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the Gainesville metro, so we used the Georgia statewide median: $22.57 an hour against $26.65 for the US. The middle half of them earn between $18.69 and $26.36 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $18.40 an hour, which is 19% below the national $22.66. The middle half of them earn between $17.16 and $22.24 an hour. BLS counts 600 of them working in the area, 57.8 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $15 to the midpoint estimate; the 25th percentile takes off about $65. That is a swing of roughly 2.6% to 0.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Gainesville has 103,870 jobs in total (BLS, May 2025), ranking 198th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $18.50 | $23.02 | $24.21 | $29.71 | 0.77 | metro |
| Roofers (47-2181) | 30% | $18.69 | $22.57 | $26.36 | $26.65 | 0.85 | state |
| Construction laborers (47-2061) | 30% | $17.16 | $18.40 | $22.24 | $22.66 | 0.81 | metro |
| Blended | 100% | 0.81 | |||||
Pick a size, pick a tier: gutters pricing in Gainesville
The cited range is split into basic, standard and premium bands, then scaled to Gainesville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,150 to $2,200
Vinyl or sectional aluminum, single story
Standard
$1,950 to $3,000
Seamless aluminum K-style, standard downspouts
Premium
$2,750 to $3,800
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $850 – $1,700 | $1,450 – $2,300 | $2,100 – $2,900 |
| average house (160 linear ft) | $1,150 – $2,200 | $1,950 – $3,000 | $2,750 – $3,800 |
| large house (240 linear ft) | $1,700 – $3,250 | $2,900 – $4,450 | $4,050 – $5,650 |
Is Gainesville cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Gainesville. Athens is the lowest at about $2,450 (midpoint, 160 linear ft), 45 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Gainesville, GAthis page | $1,150 – $3,800 | $2,500 | |
| Athens, GA45 miles | $1,150 – $3,800 | $2,450 | level |
| Atlanta, GA50 miles | $1,200 – $4,050 | $2,650 | +7% |
| Dalton, GA70 miles | $1,150 – $3,850 | $2,500 | +1% |
| Greenville, SC85 miles | $1,150 – $3,850 | $2,500 | +1% |
| Macon, GA100 miles | $1,150 – $3,850 | $2,500 | level |
| Georgia (statewide) | $1,200 – $4,000 | $2,600 | +4% |
| United States | $1,300 – $4,200 | $2,750 | +11% |
Out of the 300 metros we cover, Gainesville ranks #253 for the cost of this job (#1 is the most expensive). Statewide, Gainesville is 4% below the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $1,200 – $4,050 | $2,650 | +7% |
| Augusta, GA | 231,930 jobs | $1,100 – $3,800 | $2,450 | −1% |
| Savannah, GA | 198,360 jobs | $1,150 – $3,850 | $2,500 | +1% |
| Columbus, GA | 116,380 jobs | $1,100 – $3,750 | $2,400 | −3% |
| Athens, GA | 95,800 jobs | $1,150 – $3,800 | $2,450 | level |
| Macon, GA | 95,030 jobs | $1,150 – $3,850 | $2,500 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Gainesville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Cloud, MN | 103,920 jobs | $1,400 – $4,450 | $2,950 | +18% |
| Charleston, WV | 103,450 jobs | $1,250 – $4,100 | $2,700 | +9% |
| Champaign, IL | 105,500 jobs | $1,450 – $4,450 | $2,950 | +19% |
| Clarksville, TN | 103,220 jobs | $1,150 – $3,800 | $2,450 | level |
Gutters: what moves the price in Gainesville
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Related projects, priced for Gainesville
Jobs that often go together with gutters are priced below at their usual sizes, using the same Gainesville wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−5%) and vinyl siding lowest (−13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,350 – $11,200 | −11% |
| Metal roof | 2,000 sq ft of roof | $8,700 – $29,200 | −11% |
| Vinyl siding | 2,100 sq ft of wall | $7,300 – $21,900 | −13% |
| French drain | 60 linear ft | $530 – $1,850 | −11% |
| Attic insulation | 1,000 sq ft | $950 – $3,800 | −5% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,950 to $3,000 for Gainesville, GA is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Gainesville, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Gainesville: your questions
+How much does it cost to install gutters in Gainesville?
For 160 linear ft, expect $1,150 to $3,800 in the Gainesville area. A standard-spec job lands at $1,950 to $3,000. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Gainesville?
About $7.10 to $22.50 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Gainesville or Athens?
Athens is 45 miles away. The midpoint for 160 linear ft there is $2,450, which is 0% less than Gainesville ($2,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Gainesville?
About 34% at the midpoint, or $840 out of $2,500. Materials are 62% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Gainesville?
$1,150 to $3,800. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Gainesville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Gainesville area (our national range of $0 to $200 scaled by the local price level).
+Is Gainesville expensive for gutters compared with the rest of Georgia?
Gainesville is 4% below the Georgia statewide estimate ($2,600 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do sheet metal workers earn in Gainesville?
The BLS median is $23.02 an hour in the Gainesville area, compared with $29.71 nationally. The 25th to 75th percentile range is $18.50 to $24.21.
+What do basic and premium gutters work cost in Gainesville?
For 160 linear ft, basic work runs $1,150 to $2,200 and premium work $2,750 to $3,800. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+Is there a bad season to install gutters in Gainesville?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Gutters near Gainesville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.