Vinyl siding cost in Gainesville, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,300 – $21,900
- Per sq ft of wall
- $3.50 – $10.50
- before permit
- Versus US midpoint
- −13%
- US $16,800
- Rank of 300 metros
- #271
- 1 = most expensive
Gainesville homeowners pay roughly $7,300 to $21,900 to install vinyl siding at 2,100 sq ft of wall, or $3.50 to $10.50 per sq ft of wall (permit not included). Against the US midpoint, Gainesville is 13% lower. Carpenters earn a median of $22.24 an hour in the Gainesville area, 24% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Gainesville, GA, standard level
$11,700 to $17,600
About $5.55 to $8.35 per sq ft of wall before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,450 | $9,700 |
| Labor | $5,250 | $7,850 |
| Permits and fees | $0 | $0 |
| Total | $11,700 | $17,600 |
Cost breakdown for 2,100 sq ft of wall in Gainesville, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,050 | $8,100 | $12,100 | 55% |
| Labor | $3,250 | $6,550 | $9,800 | 45% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,300 | $14,600 | $21,900 | 100% |
Why Gainesville prices look the way they do
The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $22.24 an hour. Add the other trades involved and the blended wage index for Gainesville is 0.78 (US = 1.00), which puts labor at 45% of the total.
On the materials line, the BEA goods price index for the Gainesville metro is 96.3 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,100, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (96.8) and land at $0 to $0.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Gainesville is 0.78 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $22.24 an hour, which is 24% below the national $29.12. The middle half of them earn between $18.85 and $26.44 an hour. BLS counts 180 of them working in the area, 17.3 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 30% of the weighting: a median of $18.40 an hour, 19% below the US median of $22.66. The middle half of them earn between $17.16 and $22.24 an hour. About 600 work in the metro. That is 57.8 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 10%) the local median is $23.02 an hour, which is 23% below the national $29.71. The middle half of them earn between $18.50 and $24.21 an hour. BLS counts 50 of them working in the area, 4.8 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($26.44 an hour) instead of the median, the labor line grows by about $730. At the 25th percentile ($18.85) it shrinks by about $590. The total moves by 5.0% or 4.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 103,870 jobs in the Gainesville area. That makes it the 198th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $18.85 | $22.24 | $26.44 | $29.12 | 0.76 | metro |
| Construction laborers (47-2061) | 30% | $17.16 | $18.40 | $22.24 | $22.66 | 0.81 | metro |
| Sheet metal workers (47-2211) | 10% | $18.50 | $23.02 | $24.21 | $29.71 | 0.77 | metro |
| Blended | 100% | 0.78 | |||||
Vinyl siding: what moves the price in Gainesville
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
How Gainesville compares
Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Atlanta is the priciest of the group at $15,700. Dalton is the cheapest at $14,300.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Gainesville, GAthis page | $7,300 – $21,900 | $14,600 | |
| Athens, GA45 miles | $7,200 – $21,700 | $14,400 | −1% |
| Atlanta, GA50 miles | $7,850 – $23,500 | $15,700 | +7% |
| Dalton, GA70 miles | $7,150 – $21,500 | $14,300 | −2% |
| Greenville, SC85 miles | $7,650 – $22,900 | $15,300 | +4% |
| Macon, GA100 miles | $7,200 – $21,600 | $14,400 | −2% |
| Georgia (statewide) | $7,650 – $22,900 | $15,300 | +4% |
| United States | $8,400 – $25,200 | $16,800 | +15% |
Across 300 US metros, Gainesville comes in at #271 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Gainesville is 4% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $7,850 – $23,500 | $15,700 | +7% |
| Augusta, GA | 231,930 jobs | $7,850 – $23,600 | $15,700 | +7% |
| Savannah, GA | 198,360 jobs | $7,250 – $21,800 | $14,500 | −1% |
| Columbus, GA | 116,380 jobs | $7,200 – $21,600 | $14,400 | −2% |
| Athens, GA | 95,800 jobs | $7,200 – $21,700 | $14,400 | −1% |
| Macon, GA | 95,030 jobs | $7,200 – $21,600 | $14,400 | −2% |
Cities with a workforce like Gainesville's
Big cities and small ones price differently, so here is Gainesville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Cloud, MN | 103,920 jobs | $8,550 – $25,700 | $17,100 | +17% |
| Charleston, WV | 103,450 jobs | $7,800 – $23,500 | $15,600 | +7% |
| Champaign, IL | 105,500 jobs | $8,950 – $26,800 | $17,900 | +22% |
| Clarksville, TN | 103,220 jobs | $7,500 – $22,500 | $15,000 | +3% |
Related projects, priced for Gainesville
Because every project leans on different trades, Gainesville's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −5% and metal roof −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,350 – $11,200 | −11% |
| Gutters | 160 linear ft | $1,150 – $3,800 | −10% |
| Window replacement | 10 windows | $4,100 – $13,900 | −7% |
| Attic insulation | 1,000 sq ft | $950 – $3,800 | −5% |
| Metal roof | 2,000 sq ft of roof | $8,700 – $29,200 | −11% |
When to schedule vinyl siding in Gainesville
We use NOAA's 1991-2020 climate normals for Gainesville Gilmer Ap (in the city). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Gainesville: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Gainesville gets about 52 inches of precipitation in a normal year. The wettest months are January, March and August (5.0 inches in January). The station averages about 35 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 51 | 34 | 5.0 | Workable |
| Feb | 55 | 36 | 4.7 | Workable |
| Mar | 63 | 43 | 4.8 | Workable |
| Apr | 72 | 50 | 4.0 | Workable |
| May | 79 | 58 | 4.0 | Workable |
| Jun | 85 | 66 | 4.2 | Workable |
| Jul | 88 | 70 | 4.4 | Workable |
| Aug | 87 | 69 | 4.7 | Workable |
| Sep | 81 | 63 | 3.9 | Workable |
| Oct | 72 | 52 | 3.9 | Workable |
| Nov | 62 | 42 | 4.2 | Workable |
| Dec | 53 | 36 | 4.7 | Workable |
Cost by quality level and size in Gainesville
Three bands are cut from the same cited range and localized for Gainesville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$7,300 to $13,200
Basic clapboard siding, simple house
Standard
$11,700 to $17,600
Mid-grade panels, standard trim and corners
Premium
$16,100 to $21,900
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,200 – $7,550 | $6,700 – $10,000 | $9,200 – $12,500 |
| average house (2,100 sq ft of wall) | $7,300 – $13,200 | $11,700 – $17,600 | $16,100 – $21,900 |
| large house (3,000 sq ft of wall) | $10,500 – $18,800 | $16,700 – $25,100 | $23,000 – $31,400 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $11,700 to $17,600 for Gainesville, GA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Gainesville, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Gainesville: your questions
+How much does it cost to install vinyl siding in Gainesville?
For 2,100 sq ft of wall, expect $7,300 to $21,900 in the Gainesville area. A standard-spec job lands at $11,700 to $17,600. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Gainesville?
About $3.50 to $10.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Gainesville or Athens?
Athens is 45 miles away. The midpoint for 2,100 sq ft of wall there is $14,400, which is 1% less than Gainesville ($14,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Gainesville?
About 45% at the midpoint, or $6,550 out of $14,600. Materials are 55% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Gainesville?
$7,300 to $21,900. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Gainesville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Gainesville area (our national range of $0 to $0 scaled by the local price level).
+Is Gainesville expensive for vinyl siding compared with the rest of Georgia?
Gainesville is 4% below the Georgia statewide estimate ($15,300 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Gainesville?
The BLS median is $22.24 an hour in the Gainesville area, compared with $29.12 nationally. The 25th to 75th percentile range is $18.85 to $26.44.
+What do basic and premium vinyl siding work cost in Gainesville?
For 2,100 sq ft of wall, basic work runs $7,300 to $13,200 and premium work $16,100 to $21,900. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+Is there a bad season to install vinyl siding in Gainesville?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Vinyl siding near Gainesville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.