Vinyl siding cost in Atlanta, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,850 – $23,500
- Per sq ft of wall
- $3.75 – $11
- before permit
- Versus US midpoint
- −7%
- US $16,800
- Rank of 300 metros
- #175
- 1 = most expensive
If you want to install vinyl siding in Atlanta, plan on $7,850 to $23,500 for 2,100 sq ft of wall, all in. Per sq ft of wall, that is $3.75 to $11 for materials and labor, with the permit on top. The local midpoint runs 7% lower than the national one. Carpenters earn a median of $24.37 an hour in the Atlanta area, 16% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Atlanta, GA, standard level
$12,500 to $18,800
About $5.95 to $8.95 per sq ft of wall before permits. Labor is about 46% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,750 | $10,100 |
| Labor | $5,800 | $8,700 |
| Permits and fees | $0 | $0 |
| Total | $12,500 | $18,800 |
Cost breakdown for 2,100 sq ft of wall in Atlanta, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,200 | $8,450 | $12,700 | 54% |
| Labor | $3,600 | $7,250 | $10,900 | 46% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,850 | $15,700 | $23,500 | 100% |
Why Atlanta prices look the way they do
Labor is 46% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Atlanta the blended ratio comes out at 0.86.
On the materials line, the BEA goods price index for the Atlanta metro is 100.4 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,450, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (100.1) and land at $0 to $0.
Atlanta labor market for vinyl siding
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Atlanta is 0.86 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $24.37 an hour, which is 16% below the national $29.12. The middle half of them earn between $21.71 and $28.29 an hour. BLS counts 6,380 of them working in the area, 22.1 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 30% of the weighting: a median of $20.20 an hour, 11% below the US median of $22.66. The middle half of them earn between $17.61 and $23.07 an hour. About 16,460 work in the metro. That is 57.0 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 10%) the local median is $27.28 an hour, which is 8% below the national $29.71. The middle half of them earn between $22.23 and $36.73 an hour. BLS counts 1,550 of them working in the area, 5.4 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.29 an hour) instead of the median, the labor line grows by about $680. At the 25th percentile ($21.71) it shrinks by about $460. The total moves by 4.3% or 2.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 2,889,670 jobs in the Atlanta-Sandy Springs-Roswell area. That makes it the 8th largest of the 300 metros we cover, with 1.86% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $21.71 | $24.37 | $28.29 | $29.12 | 0.84 | metro |
| Construction laborers (47-2061) | 30% | $17.61 | $20.20 | $23.07 | $22.66 | 0.89 | metro |
| Sheet metal workers (47-2211) | 10% | $22.23 | $27.28 | $36.73 | $29.71 | 0.92 | metro |
| Blended | 100% | 0.86 | |||||
Cost by quality level and size in Atlanta
Three bands are cut from the same cited range and localized for Atlanta wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$7,850 to $14,100
Basic clapboard siding, simple house
Standard
$12,500 to $18,800
Mid-grade panels, standard trim and corners
Premium
$17,200 to $23,500
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,500 – $8,050 | $7,150 – $10,700 | $9,850 – $13,400 |
| average house (2,100 sq ft of wall) | $7,850 – $14,100 | $12,500 – $18,800 | $17,200 – $23,500 |
| large house (3,000 sq ft of wall) | $11,200 – $20,100 | $17,900 – $26,900 | $24,600 – $33,600 |
Atlanta against nearby metros and the rest of Georgia
Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Atlanta is the priciest of the group. Dalton is the cheapest at $14,300.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Atlanta, GAthis page | $7,850 – $23,500 | $15,700 | |
| Gainesville, GA50 miles | $7,300 – $21,900 | $14,600 | −7% |
| Athens, GA70 miles | $7,200 – $21,700 | $14,400 | −8% |
| Macon, GA70 miles | $7,200 – $21,600 | $14,400 | −8% |
| Dalton, GA80 miles | $7,150 – $21,500 | $14,300 | −9% |
| Warner Robins, GA95 miles | $7,500 – $22,600 | $15,000 | −4% |
| Georgia (statewide) | $7,650 – $22,900 | $15,300 | −3% |
| United States | $8,400 – $25,200 | $16,800 | +7% |
Across 300 US metros, Atlanta comes in at #175 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Atlanta is 3% above the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Augusta, GA | 231,930 jobs | $7,850 – $23,600 | $15,700 | level |
| Savannah, GA | 198,360 jobs | $7,250 – $21,800 | $14,500 | −7% |
| Columbus, GA | 116,380 jobs | $7,200 – $21,600 | $14,400 | −8% |
| Gainesville, GA | 103,870 jobs | $7,300 – $21,900 | $14,600 | −7% |
| Athens, GA | 95,800 jobs | $7,200 – $21,700 | $14,400 | −8% |
| Macon, GA | 95,030 jobs | $7,200 – $21,600 | $14,400 | −8% |
Cities with a workforce like Atlanta's
Big cities and small ones price differently, so here is Atlanta against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $8,650 – $25,900 | $17,300 | +10% |
| Miami, FL | 2,819,940 jobs | $8,050 – $24,200 | $16,100 | +3% |
| Washington, DC | 3,136,190 jobs | $8,600 – $25,900 | $17,200 | +10% |
| Boston, MA | 2,703,890 jobs | $9,550 – $28,700 | $19,100 | +22% |
What nearby projects cost in Atlanta
Because every project leans on different trades, Atlanta's wage level does not move all prices equally. Against the US midpoint, attic insulation runs +3% and roof replacement −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,600 – $11,700 | −7% |
| Gutters | 160 linear ft | $1,200 – $4,050 | −4% |
| Window replacement | 10 windows | $4,200 – $14,400 | −5% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,100 | +3% |
| Metal roof | 2,000 sq ft of roof | $9,300 – $30,900 | −6% |
Climate in Atlanta: timing your vinyl siding job
We use NOAA's 1991-2020 climate normals for Atlanta Fulton Co Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
August through June is the stretch where exterior installation runs into the fewest weather problems in Atlanta (11 of 12 months). July has an average daytime high of 90°F or more.
Atlanta gets about 48 inches of precipitation in a normal year. The wettest months are February, March and July (5.0 inches in July). Inside the workable window, September and October are the driest, at 3.4 and 3.6 inches. The station averages about 54 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 54 | 34 | 4.3 | Workable |
| Feb | 58 | 37 | 4.3 | Workable |
| Mar | 66 | 43 | 4.5 | Workable |
| Apr | 74 | 50 | 3.6 | Workable |
| May | 81 | 58 | 3.6 | Workable |
| Jun | 87 | 67 | 3.8 | Workable |
| Jul | 90 | 70 | 5.0 | Hot |
| Aug | 89 | 69 | 4.0 | Workable |
| Sep | 84 | 63 | 3.4 | Workable |
| Oct | 75 | 51 | 3.6 | Workable |
| Nov | 64 | 41 | 3.8 | Workable |
| Dec | 56 | 36 | 4.2 | Workable |
Specs and site conditions that change a Atlanta bid
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,500 to $18,800 for Atlanta, GA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Atlanta, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Atlanta: your questions
+How much does it cost to install vinyl siding in Atlanta?
For 2,100 sq ft of wall, expect $7,850 to $23,500 in the Atlanta area. A standard-spec job lands at $12,500 to $18,800. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Atlanta?
About $3.75 to $11 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Atlanta or Gainesville?
Gainesville is 50 miles away. The midpoint for 2,100 sq ft of wall there is $14,600, which is 7% less than Atlanta ($15,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Atlanta?
About 46% at the midpoint, or $7,250 out of $15,700. Materials are 54% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Atlanta?
$7,850 to $23,500. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Atlanta?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Atlanta area (our national range of $0 to $0 scaled by the local price level).
+Is Atlanta expensive for vinyl siding compared with the rest of Georgia?
Atlanta is 3% above the Georgia statewide estimate ($15,300 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Atlanta?
The BLS median is $24.37 an hour in the Atlanta area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.71 to $28.29.
+What do basic and premium vinyl siding work cost in Atlanta?
For 2,100 sq ft of wall, basic work runs $7,850 to $14,100 and premium work $17,200 to $23,500. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Atlanta?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Atlanta
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.