Vinyl siding cost in Washington, DC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,600 – $25,900
- Per sq ft of wall
- $4.10 – $12.50
- before permit
- Versus US midpoint
- +3%
- US $16,800
- Rank of 300 metros
- #76
- 1 = most expensive
If you want to install vinyl siding in Washington, plan on $8,600 to $25,900 for 2,100 sq ft of wall, all in. Per sq ft of wall, that is $4.10 to $12.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Building materials run about 5% above the US average here (BEA goods price index 104.8).
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Washington, DC, standard level
$13,800 to $20,700
About $6.55 to $9.85 per sq ft of wall before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $7,050 | $10,600 |
| Labor | $6,750 | $10,100 |
| Permits and fees | $0 | $0 |
| Total | $13,800 | $20,700 |
Cost breakdown for 2,100 sq ft of wall in Washington, DC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,400 | $8,800 | $13,200 | 51% |
| Labor | $4,200 | $8,450 | $12,600 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,600 | $17,200 | $25,900 | 100% |
Where the Washington price comes from
Labor is 49% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Washington the blended ratio comes out at 1.00.
On the materials line, the BEA goods price index for the Washington metro is 104.8 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,800, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (108.9) and land at $0 to $0.
Is Washington cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Washington. Winchester is the lowest at about $15,200 (midpoint, 2,100 sq ft of wall), 60 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Washington, DCthis page | $8,600 – $25,900 | $17,200 | |
| Hagerstown, MD55 miles | $7,950 – $23,900 | $15,900 | −8% |
| Baltimore, MD60 miles | $8,550 – $25,600 | $17,100 | −1% |
| Winchester, VA60 miles | $7,600 – $22,700 | $15,200 | −12% |
| Lexington Park, MD65 miles | $8,450 – $25,400 | $16,900 | −2% |
| Chambersburg, PA75 miles | $7,950 – $23,800 | $15,900 | −8% |
| District of Columbia (statewide) | $8,800 – $26,400 | $17,600 | +2% |
| United States | $8,400 – $25,200 | $16,800 | −3% |
Across 300 US metros, Washington comes in at #76 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Washington is 2% below the District of Columbia figure.
Washington is the only District of Columbia metro we cover, so the statewide page is the only in-state comparison. It uses statewide wages, which include rural areas.
Cities with a workforce like Washington's
Big cities and small ones price differently, so here is Washington against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Houston, TX | 3,289,720 jobs | $7,750 – $23,300 | $15,500 | −10% |
| Philadelphia, PA | 2,897,830 jobs | $8,650 – $25,900 | $17,300 | level |
| Dallas, TX | 4,049,800 jobs | $7,900 – $23,700 | $15,800 | −8% |
| Atlanta, GA | 2,889,670 jobs | $7,850 – $23,500 | $15,700 | −9% |
Washington labor market for vinyl siding
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Washington is 1.00 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $29.23 an hour, which is in line with the national $29.12. The middle half of them earn between $26.62 and $35.56 an hour. BLS counts 13,280 of them working in the area, 42.3 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $22.80 an hour, in line with the US median of $22.66. The middle half of them earn between $20.07 and $27.05 an hour. About 17,710 work in the metro. That is 56.5 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 10%) the local median is $29.46 an hour, which is in line with the national $29.71. The middle half of them earn between $24.28 and $35.57 an hour. BLS counts 1,840 of them working in the area, 5.9 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($35.56 an hour) instead of the median, the labor line grows by about $1,100. At the 25th percentile ($26.62) it shrinks by about $450. The total moves by 6.4% or 2.6%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 3,136,190 jobs in the Washington-Arlington-Alexandria area. That makes it the 6th largest of the 300 metros we cover, with 2.02% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $26.62 | $29.23 | $35.56 | $29.12 | 1.00 | metro |
| Construction laborers (47-2061) | 30% | $20.07 | $22.80 | $27.05 | $22.66 | 1.01 | metro |
| Sheet metal workers (47-2211) | 10% | $24.28 | $29.46 | $35.57 | $29.71 | 0.99 | metro |
| Blended | 100% | 1.00 | |||||
What nearby projects cost in Washington
Because every project leans on different trades, Washington's wage level does not move all prices equally. Against the US midpoint, window replacement runs +5% and attic insulation +1%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,400 – $13,100 | +5% |
| Gutters | 160 linear ft | $1,300 – $4,350 | +4% |
| Window replacement | 10 windows | $4,750 – $15,800 | +5% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,050 | +1% |
| Metal roof | 2,000 sq ft of roof | $10,500 – $33,900 | +4% |
Climate in Washington: timing your vinyl siding job
We use NOAA's 1991-2020 climate normals for Washington Reagan Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
August through June is the stretch where exterior installation runs into the fewest weather problems in Washington (11 of 12 months). July has an average daytime high of 90°F or more.
Washington gets about 42 inches of precipitation in a normal year, including roughly 14 inches of snow. The wettest months are May, June and July (4.3 inches in July). Inside the workable window, January and February are the driest, at 2.9 and 2.6 inches. The station averages about 40 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 45 | 30 | 2.9 | Workable |
| Feb | 48 | 32 | 2.6 | Workable |
| Mar | 57 | 39 | 3.5 | Workable |
| Apr | 68 | 48 | 3.2 | Workable |
| May | 77 | 58 | 3.9 | Workable |
| Jun | 85 | 68 | 4.2 | Workable |
| Jul | 90 | 72 | 4.3 | Hot |
| Aug | 88 | 71 | 3.3 | Workable |
| Sep | 81 | 64 | 3.9 | Workable |
| Oct | 69 | 52 | 3.7 | Workable |
| Nov | 58 | 42 | 2.9 | Workable |
| Dec | 49 | 35 | 3.4 | Workable |
Vinyl siding: what moves the price in Washington
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Washington: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Washington wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$8,600 to $15,500
Basic clapboard siding, simple house
Standard
$13,800 to $20,700
Mid-grade panels, standard trim and corners
Premium
$19,000 to $25,900
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,900 – $8,850 | $7,900 – $11,800 | $10,800 – $14,800 |
| average house (2,100 sq ft of wall) | $8,600 – $15,500 | $13,800 – $20,700 | $19,000 – $25,900 |
| large house (3,000 sq ft of wall) | $12,300 – $22,200 | $19,700 – $29,500 | $27,100 – $36,900 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,800 to $20,700 for Washington, DC is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Washington, DC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Washington: your questions
+How much does it cost to install vinyl siding in Washington?
For 2,100 sq ft of wall, expect $8,600 to $25,900 in the Washington area. A standard-spec job lands at $13,800 to $20,700. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Washington?
About $4.10 to $12.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Washington or Hagerstown?
Hagerstown is 55 miles away. The midpoint for 2,100 sq ft of wall there is $15,900, which is 8% less than Washington ($17,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Washington?
About 49% at the midpoint, or $8,450 out of $17,200. Materials are 51% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Washington?
$8,600 to $25,900. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Washington?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Washington area (our national range of $0 to $0 scaled by the local price level).
+Is Washington expensive for vinyl siding compared with the rest of District of Columbia?
Washington is 2% below the District of Columbia statewide estimate ($17,600 at the midpoint).
+What do carpenters earn in Washington?
The BLS median is $29.23 an hour in the Washington area, compared with $29.12 nationally. The 25th to 75th percentile range is $26.62 to $35.56.
+What do basic and premium vinyl siding work cost in Washington?
For 2,100 sq ft of wall, basic work runs $8,600 to $15,500 and premium work $19,000 to $25,900. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Washington?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. January and February are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Washington
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.