Vinyl siding cost in Lexington Park, MD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,450 – $25,400
- Per sq ft of wall
- $4.05 – $12
- before permit
- Versus US midpoint
- +1%
- US $16,800
- Rank of 300 metros
- #100
- 1 = most expensive
Local price for new vinyl siding in the Lexington Park area: $8,450 to $25,400 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $30.23 an hour in the Lexington Park area, 4% above the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Lexington Park, MD, standard level
$13,500 to $20,300
About $6.45 to $9.65 per sq ft of wall before permits. Labor is about 50% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,700 | $10,000 |
| Labor | $6,850 | $10,200 |
| Permits and fees | $0 | $0 |
| Total | $13,500 | $20,300 |
Cost breakdown for 2,100 sq ft of wall in Lexington Park, MD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,200 | $8,350 | $12,600 | 50% |
| Labor | $4,250 | $8,550 | $12,800 | 50% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,450 | $16,900 | $25,400 | 100% |
Where the Lexington Park price comes from
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Lexington Park wages are 1.02 times the national level. Labor makes up about 50% of the midpoint estimate (50% at national prices).
Materials are scaled with BEA's regional price parity for goods. Lexington Park is at 99.7 against 100 for the US, so a materials line of $8,400 nationally becomes $8,350 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 100.8: $0 to $0.
Who does the work: Lexington Park trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lexington Park the blend is 1.02.
Carpenters (47-2031), 60% of the weighting: a median of $30.23 an hour, 4% above the US median of $29.12. The middle half of them earn between $26.36 and $35.38 an hour. About 210 work in the metro. That is 29.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $21.88 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.05 and $23.85 an hour. BLS counts 450 of them working in the area, 63.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $30.84 an hour, 4% above the US median of $29.71. The middle half of them earn between $23.00 and $38.12 an hour. About 30 work in the metro. That is 4.2 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $890 to the midpoint estimate; the 25th percentile takes off about $670. That is a swing of roughly 4.0% to 5.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lexington Park has 70,650 jobs in total (BLS, May 2025), ranking 259th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $26.36 | $30.23 | $35.38 | $29.12 | 1.04 | metro |
| Construction laborers (47-2061) | 30% | $18.05 | $21.88 | $23.85 | $22.66 | 0.97 | metro |
| Sheet metal workers (47-2211) | 10% | $23.00 | $30.84 | $38.12 | $29.71 | 1.04 | metro |
| Blended | 100% | 1.02 | |||||
Related projects, priced for Lexington Park
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Lexington Park wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+5%) and gutters lowest (+1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,400 – $13,000 | +4% |
| Gutters | 160 linear ft | $1,300 – $4,250 | +1% |
| Window replacement | 10 windows | $4,550 – $15,100 | +1% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,200 | +5% |
| Metal roof | 2,000 sq ft of roof | $10,600 – $33,500 | +3% |
Is Lexington Park cheap or dear? The local comparison
Of the five closest metros, 3 are cheaper than Lexington Park. Virginia Beach is the lowest at about $15,300 (midpoint, 2,100 sq ft of wall), 100 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lexington Park, MDthis page | $8,450 – $25,400 | $16,900 | |
| Washington, DC65 miles | $8,600 – $25,900 | $17,200 | +2% |
| Baltimore, MD70 miles | $8,550 – $25,600 | $17,100 | +1% |
| Dover, DE75 miles | $7,850 – $23,600 | $15,700 | −7% |
| Richmond, VA80 miles | $7,700 – $23,000 | $15,400 | −9% |
| Virginia Beach, VA100 miles | $7,650 – $23,000 | $15,300 | −9% |
| Maryland (statewide) | $8,600 – $25,800 | $17,200 | +2% |
| United States | $8,400 – $25,200 | $16,800 | −1% |
Out of the 300 metros we cover, Lexington Park ranks #100 for the cost of this job (#1 is the most expensive). Statewide, Lexington Park is 2% below the Maryland figure.
Elsewhere in Maryland
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Baltimore, MD | 1,356,680 jobs | $8,550 – $25,600 | $17,100 | +1% |
| Hagerstown, MD | 107,170 jobs | $7,950 – $23,900 | $15,900 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Lexington Park against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bismarck, ND | 71,270 jobs | $8,050 – $24,200 | $16,100 | −5% |
| Janesville, WI | 69,870 jobs | $9,050 – $27,100 | $18,100 | +7% |
| Redding, CA | 71,550 jobs | $9,400 – $28,200 | $18,800 | +11% |
| Wausau, WI | 69,530 jobs | $7,950 – $23,900 | $15,900 | −6% |
Cost by quality level and size in Lexington Park
The cited range is split into basic, standard and premium bands, then scaled to Lexington Park. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,450 to $15,200
Basic clapboard siding, simple house
Standard
$13,500 to $20,300
Mid-grade panels, standard trim and corners
Premium
$18,600 to $25,400
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,850 – $8,700 | $7,750 – $11,600 | $10,600 – $14,500 |
| average house (2,100 sq ft of wall) | $8,450 – $15,200 | $13,500 – $20,300 | $18,600 – $25,400 |
| large house (3,000 sq ft of wall) | $12,100 – $21,700 | $19,300 – $29,000 | $26,600 – $36,200 |
Specs and site conditions that change a Lexington Park bid
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
The best months for vinyl siding in Lexington Park
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Patuxent River Nas (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Lexington Park: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Lexington Park gets about 45 inches of precipitation in a normal year, including roughly 13 inches of snow. The wettest months are June, July and August (4.7 inches in August). The station averages about 26 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 45 | 30 | 2.9 | Workable |
| Feb | 48 | 31 | 2.8 | Workable |
| Mar | 55 | 37 | 4.0 | Workable |
| Apr | 66 | 47 | 3.7 | Workable |
| May | 75 | 57 | 3.7 | Workable |
| Jun | 83 | 66 | 4.3 | Workable |
| Jul | 87 | 71 | 4.5 | Workable |
| Aug | 85 | 69 | 4.7 | Workable |
| Sep | 79 | 63 | 4.2 | Workable |
| Oct | 69 | 52 | 4.0 | Workable |
| Nov | 58 | 41 | 3.1 | Workable |
| Dec | 50 | 34 | 3.5 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,500 to $20,300 for Lexington Park, MD is attached.
Detailed vinyl siding report for Lexington Park, MD, $9
The report lays out the vinyl siding numbers for Lexington Park, MD line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Lexington Park: your questions
+How much does it cost to install vinyl siding in Lexington Park?
For 2,100 sq ft of wall, expect $8,450 to $25,400 in the Lexington Park area. A standard-spec job lands at $13,500 to $20,300. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Lexington Park?
About $4.05 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Lexington Park or Washington?
Washington is 65 miles away. The midpoint for 2,100 sq ft of wall there is $17,200, which is 2% more than Lexington Park ($16,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lexington Park?
About 50% at the midpoint, or $8,550 out of $16,900. Materials are 50% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Lexington Park?
$8,450 to $25,400. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Lexington Park?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Lexington Park area (our national range of $0 to $0 scaled by the local price level).
+Is Lexington Park expensive for vinyl siding compared with the rest of Maryland?
Lexington Park is 2% below the Maryland statewide estimate ($17,200 at the midpoint). We cover 3 metros in Maryland; see the state page to compare them.
+What do carpenters earn in Lexington Park?
The BLS median is $30.23 an hour in the Lexington Park area, compared with $29.12 nationally. The 25th to 75th percentile range is $26.36 to $35.38.
+What do basic and premium vinyl siding work cost in Lexington Park?
For 2,100 sq ft of wall, basic work runs $8,450 to $15,200 and premium work $18,600 to $25,400. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+Is there a bad season to install vinyl siding in Lexington Park?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Vinyl siding near Lexington Park
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.