Vinyl siding cost in Macon, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,200 – $21,600
- Per sq ft of wall
- $3.40 – $10.50
- before permit
- Versus US midpoint
- −14%
- US $16,800
- Rank of 300 metros
- #285
- 1 = most expensive
Local price for new vinyl siding in the Macon area: $7,200 to $21,600 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 14% lower than the US figure. Carpenters earn a median of $20.03 an hour in the Macon area, 31% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Macon, GA, standard level
$11,500 to $17,200
About $5.45 to $8.20 per sq ft of wall before permits. Labor is about 44% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,450 | $9,700 |
| Labor | $5,050 | $7,550 |
| Permits and fees | $0 | $0 |
| Total | $11,500 | $17,200 |
Cost breakdown for 2,100 sq ft of wall in Macon, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,050 | $8,100 | $12,100 | 56% |
| Labor | $3,150 | $6,300 | $9,450 | 44% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,200 | $14,400 | $21,600 | 100% |
Why Macon prices look the way they do
The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $20.03 an hour. Add the other trades involved and the blended wage index for Macon is 0.75 (US = 1.00), which puts labor at 44% of the total.
Materials are scaled with BEA's regional price parity for goods. Macon is at 96.3 against 100 for the US, so a materials line of $8,400 nationally becomes $8,100 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 88.5: $0 to $0.
How Macon compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $13,700 to $15,700 across Macon and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Macon, GAthis page | $7,200 – $21,600 | $14,400 | |
| Warner Robins, GA25 miles | $7,500 – $22,600 | $15,000 | +5% |
| Atlanta, GA70 miles | $7,850 – $23,500 | $15,700 | +9% |
| Columbus, GA70 miles | $7,200 – $21,600 | $14,400 | level |
| Athens, GA80 miles | $7,200 – $21,700 | $14,400 | +1% |
| Albany, GA85 miles | $6,850 – $20,600 | $13,700 | −4% |
| Georgia (statewide) | $7,650 – $22,900 | $15,300 | +6% |
| United States | $8,400 – $25,200 | $16,800 | +17% |
Out of the 300 metros we cover, Macon ranks #285 for the cost of this job (#1 is the most expensive). Statewide, Macon is 6% below the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $7,850 – $23,500 | $15,700 | +9% |
| Augusta, GA | 231,930 jobs | $7,850 – $23,600 | $15,700 | +9% |
| Savannah, GA | 198,360 jobs | $7,250 – $21,800 | $14,500 | +1% |
| Columbus, GA | 116,380 jobs | $7,200 – $21,600 | $14,400 | level |
| Gainesville, GA | 103,870 jobs | $7,300 – $21,900 | $14,600 | +2% |
| Athens, GA | 95,800 jobs | $7,200 – $21,700 | $14,400 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Macon against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fort Smith, AR | 95,560 jobs | $7,000 – $21,000 | $14,000 | −3% |
| Barnstable, MA | 94,110 jobs | $9,150 – $27,500 | $18,300 | +28% |
| Athens, GA | 95,800 jobs | $7,200 – $21,700 | $14,400 | +1% |
| Billings, MT | 93,800 jobs | $8,250 – $24,700 | $16,500 | +14% |
Specs and site conditions that change a Macon bid
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
The best months for vinyl siding in Macon
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Macon Middle Ga Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Macon are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Macon gets about 47 inches of precipitation in a normal year. The wettest months are June, July and December (4.8 inches in July). Inside the workable window, May and October are the driest, at 2.6 and 2.6 inches. The station averages about 85 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 36 | 4.3 | Workable |
| Feb | 63 | 39 | 4.2 | Workable |
| Mar | 71 | 45 | 4.3 | Workable |
| Apr | 78 | 51 | 3.6 | Workable |
| May | 86 | 60 | 2.6 | Workable |
| Jun | 91 | 68 | 4.4 | Hot |
| Jul | 94 | 72 | 4.8 | Hot |
| Aug | 92 | 71 | 4.4 | Hot |
| Sep | 88 | 65 | 3.7 | Workable |
| Oct | 79 | 53 | 2.6 | Workable |
| Nov | 69 | 43 | 3.4 | Workable |
| Dec | 61 | 38 | 4.6 | Workable |
Related projects, priced for Macon
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Macon wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−4%) and roof replacement lowest (−12%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,300 – $11,100 | −12% |
| Gutters | 160 linear ft | $1,150 – $3,850 | −9% |
| Window replacement | 10 windows | $4,000 – $13,600 | −10% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
| Metal roof | 2,000 sq ft of roof | $8,700 – $29,100 | −11% |
Who does the work: Macon trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Macon the blend is 0.75.
Carpenters (47-2031), 60% of the weighting: a median of $20.03 an hour, 31% below the US median of $29.12. The middle half of them earn between $16.47 and $27.05 an hour. About 70 work in the metro. That is 7.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $19.23 an hour, which is 15% below the national $22.66. The middle half of them earn between $17.05 and $20.66 an hour. BLS counts 420 of them working in the area, 44.2 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $24.03 an hour, 19% below the US median of $29.71. The middle half of them earn between $19.73 and $28.77 an hour. About 40 work in the metro. That is 4.2 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,200 to the midpoint estimate; the 25th percentile takes off about $620. That is a swing of roughly 4.3% to 8.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Macon-Bibb County has 95,030 jobs in total (BLS, May 2025), ranking 211th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $16.47 | $20.03 | $27.05 | $29.12 | 0.69 | metro |
| Construction laborers (47-2061) | 30% | $17.05 | $19.23 | $20.66 | $22.66 | 0.85 | metro |
| Sheet metal workers (47-2211) | 10% | $19.73 | $24.03 | $28.77 | $29.71 | 0.81 | metro |
| Blended | 100% | 0.75 | |||||
Cost by quality level and size in Macon
The cited range is split into basic, standard and premium bands, then scaled to Macon. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$7,200 to $12,900
Basic clapboard siding, simple house
Standard
$11,500 to $17,200
Mid-grade panels, standard trim and corners
Premium
$15,800 to $21,600
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,100 – $7,400 | $6,550 – $9,850 | $9,050 – $12,300 |
| average house (2,100 sq ft of wall) | $7,200 – $12,900 | $11,500 – $17,200 | $15,800 – $21,600 |
| large house (3,000 sq ft of wall) | $10,300 – $18,500 | $16,400 – $24,600 | $22,600 – $30,800 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $11,500 to $17,200 for Macon, GA is attached.
Detailed vinyl siding report for Macon, GA, $9
Multi-page report for Macon, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Macon: your questions
+How much does it cost to install vinyl siding in Macon?
For 2,100 sq ft of wall, expect $7,200 to $21,600 in the Macon area. A standard-spec job lands at $11,500 to $17,200. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Macon?
About $3.40 to $10.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Macon or Warner Robins?
Warner Robins is 25 miles away. The midpoint for 2,100 sq ft of wall there is $15,000, which is 5% more than Macon ($14,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Macon?
About 44% at the midpoint, or $6,300 out of $14,400. Materials are 56% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Macon?
$7,200 to $21,600. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Macon?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Macon area (our national range of $0 to $0 scaled by the local price level).
+Is Macon expensive for vinyl siding compared with the rest of Georgia?
Macon is 6% below the Georgia statewide estimate ($15,300 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Macon?
The BLS median is $20.03 an hour in the Macon area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.47 to $27.05.
+What do basic and premium vinyl siding work cost in Macon?
For 2,100 sq ft of wall, basic work runs $7,200 to $12,900 and premium work $15,800 to $21,600. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Macon?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Macon
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.