Skip to content
CostLocal

Vinyl siding cost in Billings, MT

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (2,100 sq ft of wall)
$8,250 – $24,700
Per sq ft of wall
$3.90 – $12
before permit
Versus US midpoint
−2%
US $16,800
Rank of 300 metros
#132
1 = most expensive

Billings homeowners pay roughly $8,250 to $24,700 to install vinyl siding at 2,100 sq ft of wall, or $3.90 to $12 per sq ft of wall (permit not included). Against the US midpoint, Billings is almost level. Building materials run about 4% below the US average here (BEA goods price index 96.0).

Estimate your vinyl siding cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade panels, standard trim and corners

Estimated cost for 2,100 sq ft of wall in Billings, MT, standard level

$13,200 to $19,700

About $6.25 to $9.40 per sq ft of wall before permits. Labor is about 51% of the bill.

Cost breakdown
PartLowHigh
Materials$6,450$9,700
Labor$6,700$10,100
Permits and fees$0$0
Total$13,200$19,700
Save and get a PDF report

Cost breakdown for 2,100 sq ft of wall in Billings, MT

Part of the jobLowMidpointHighShare
Materials$4,050$8,050$12,10049%
Labor$4,200$8,400$12,60051%
Permits and fees$0$0$00%
Total$8,250$16,500$24,700100%

Why Billings prices look the way they do

Labor is 51% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Billings the blended ratio comes out at 1.00.

On the materials line, the BEA goods price index for the Billings metro is 96.0 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,050, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (93.5) and land at $0 to $0.

Vinyl siding: what moves the price in Billings

  • Wall area is not floor area

    A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.

  • Style

    Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).

  • Old siding removal

    Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.

Planning more than one job in Billings?

Because every project leans on different trades, Billings's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −2% and window replacement −5%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,850 – $11,900−4%
Gutters160 linear ft$1,250 – $4,100−3%
Window replacement10 windows$4,250 – $14,300−5%
Attic insulation1,000 sq ft$990 – $3,950−2%
Metal roof2,000 sq ft of roof$9,750 – $31,200−4%

Cost by quality level and size in Billings

Three bands are cut from the same cited range and localized for Billings wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$8,250 to $14,800

Basic clapboard siding, simple house

Standard

$13,200 to $19,700

Mid-grade panels, standard trim and corners

Premium

$18,100 to $24,700

Premium or board-and-batten, many corners and gables

Cost by size and quality level
SizeBasicStandardPremium
small house (1,200 sq ft of wall)$4,700 – $8,450$7,500 – $11,300$10,300 – $14,100
average house (2,100 sq ft of wall)$8,250 – $14,800$13,200 – $19,700$18,100 – $24,700
large house (3,000 sq ft of wall)$11,800 – $21,200$18,800 – $28,200$25,900 – $35,300

When to schedule vinyl siding in Billings

We use NOAA's 1991-2020 climate normals for Billings Logan Intl Ap (in the city). These are 30-year monthly averages, not forecasts.

March through November is the stretch where exterior installation runs into the fewest weather problems in Billings (9 of 12 months). January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Billings gets about 14 inches of precipitation in a normal year, including roughly 57 inches of snow. The wettest months are April, May and June (2.4 inches in May). Inside the workable window, August and November are the driest, at 0.9 and 0.6 inches. The station averages about 32 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Billings Logan Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan36180.6Cold
Feb39200.6Cold
Mar49270.9Workable
Apr57351.7Workable
May67442.4Workable
Jun77522.2Workable
Jul87591.2Workable
Aug86580.9Workable
Sep74491.4Workable
Oct59371.4Workable
Nov46270.6Workable
Dec36190.6Cold

Billings against nearby metros and the rest of Montana

Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Bozeman is the priciest of the group at $17,200. Rapid City is the cheapest at $15,100.

Comparison with nearby areas
AreaRangeMidpointvs. here
Billings, MTthis page$8,250 – $24,700$16,500
Bozeman, MT115 miles$8,600 – $25,800$17,200+5%
Idaho Falls, ID225 miles$7,750 – $23,300$15,500−6%
Missoula, MT275 miles$8,150 – $24,500$16,300−1%
Logan, UT300 miles$7,800 – $23,300$15,600−5%
Rapid City, SD305 miles$7,550 – $22,700$15,100−8%
Montana (statewide)$8,250 – $24,700$16,500level
United States$8,400 – $25,200$16,800+2%

Across 300 US metros, Billings comes in at #132 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Billings is 0% below the Montana figure.

Other Montana metros

Montana metros compared with Billings
MetroSizeRangeMidpointvs. here
Bozeman, MT72,210 jobs$8,600 – $25,800$17,200+5%
Missoula, MT67,070 jobs$8,150 – $24,500$16,300−1%

Cities with a workforce like Billings's

Big cities and small ones price differently, so here is Billings against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Barnstable, MA94,110 jobs$9,150 – $27,500$18,300+12%
Iowa City, IA93,760 jobs$7,750 – $23,200$15,500−6%
Macon, GA95,030 jobs$7,200 – $21,600$14,400−13%
Oshkosh, WI93,750 jobs$9,250 – $27,700$18,500+12%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Billings is 1.00 times the national level.

For carpenters (47-2031, weighted 60%) the local median is $28.34 an hour, which is in line with the national $29.12. The middle half of them earn between $23.84 and $30.83 an hour. BLS counts 530 of them working in the area, 56.5 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.

Construction laborers (47-2061), 30% of the weighting: a median of $23.68 an hour, 5% above the US median of $22.66. The middle half of them earn between $21.42 and $28.31 an hour. About 830 work in the metro. That is 88.5 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For sheet metal workers (47-2211, weighted 10%) the local median is $30.04 an hour, which is in line with the national $29.71. The middle half of them earn between $24.15 and $35.65 an hour. BLS counts 80 of them working in the area, 8.5 for every 10,000 jobs (US: 7.7), so the local bench is about average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($30.83 an hour) instead of the median, the labor line grows by about $430. At the 25th percentile ($23.84) it shrinks by about $780. The total moves by 2.6% or 4.7%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 93,800 jobs in the Billings area. That makes it the 213th largest of the 300 metros we cover, with 0.06% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$23.84$28.34$30.83$29.120.97metro
Construction laborers (47-2061)30%$21.42$23.68$28.31$22.661.05metro
Sheet metal workers (47-2211)10%$24.15$30.04$35.65$29.711.01metro
Blended100%1.00

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,200 to $19,700 for Billings, MT is attached.

Detailed vinyl siding report for Billings, MT, $9

Multi-page report for Billings, MT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Vinyl siding in Billings: your questions

+How much does it cost to install vinyl siding in Billings?

For 2,100 sq ft of wall, expect $8,250 to $24,700 in the Billings area. A standard-spec job lands at $13,200 to $19,700. Small jobs usually cost more per sq ft of wall and large ones less.

+What is the price per sq ft of wall for vinyl siding in Billings?

About $3.90 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.

+Is vinyl siding cheaper in Billings or Bozeman?

Bozeman is 115 miles away. The midpoint for 2,100 sq ft of wall there is $17,200, which is 5% more than Billings ($16,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Billings?

About 51% at the midpoint, or $8,400 out of $16,500. Materials are 49% and permits 0%. Nationally, labor is 50%.

+What would average house (2,100 sq ft of wall) cost in Billings?

$8,250 to $24,700. Pick a different size in the estimator above to get your own number.

+Does vinyl siding need a permit in Billings?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Billings area (our national range of $0 to $0 scaled by the local price level).

+Is Billings expensive for vinyl siding compared with the rest of Montana?

Billings is 0% below the Montana statewide estimate ($16,500 at the midpoint). We cover 3 metros in Montana; see the state page to compare them.

+What do carpenters earn in Billings?

The BLS median is $28.34 an hour in the Billings area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.84 to $30.83.

+What do basic and premium vinyl siding work cost in Billings?

For 2,100 sq ft of wall, basic work runs $8,250 to $14,800 and premium work $18,100 to $24,700. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.

+When is the best time to install vinyl siding in Billings?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. August and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Vinyl siding near Billings

Vinyl siding: all pricesVinyl siding in MontanaAll projects in BillingsMontana cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.