Gutters cost in Wheeling, WV
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,300 – $4,200
- Per linear ft
- $8.25 – $25.50
- before permit
- Versus US midpoint
- +1%
- US $2,750
- Rank of 300 metros
- #105
- 1 = most expensive
If you want to install gutters in Wheeling, plan on $1,300 to $4,200 for 160 linear ft, all in. Per linear ft, that is $8.25 to $25.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Sheet metal workers earn a median of $35.52 an hour in the Wheeling area, 20% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Wheeling, WV, standard level
$2,200 to $3,350
About $13.50 to $20 per linear ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $960 | $1,300 |
| Permits and fees | $55 | $120 |
| Total | $2,200 | $3,350 |
Cost breakdown for 160 linear ft in Wheeling, WV
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 56% |
| Labor | $700 | $1,150 | $1,600 | 41% |
| Permits and fees | $0 | $90 | $180 | 3% |
| Total | $1,300 | $2,750 | $4,200 | 100% |
Where the Wheeling price comes from
Labor is 41% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Wheeling the blended ratio comes out at 1.10.
On the materials line, the BEA goods price index for the Wheeling metro is 96.4 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (88.3) and land at $0 to $180.
Climate in Wheeling: timing your gutters job
We use NOAA's 1991-2020 climate normals for Wheeling (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Wheeling (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Wheeling gets about 42 inches of precipitation in a normal year. The wettest months are May, June and July (4.3 inches in June). Inside the workable window, October and November are the driest, at 2.9 and 2.9 inches. The station averages about 18 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 39 | 22 | 3.4 | Cold |
| Feb | 42 | 23 | 2.7 | Cold |
| Mar | 51 | 30 | 3.8 | Workable |
| Apr | 65 | 40 | 3.5 | Workable |
| May | 74 | 50 | 4.2 | Workable |
| Jun | 81 | 59 | 4.3 | Workable |
| Jul | 85 | 64 | 4.1 | Workable |
| Aug | 85 | 63 | 3.2 | Workable |
| Sep | 79 | 56 | 3.5 | Workable |
| Oct | 66 | 44 | 2.9 | Workable |
| Nov | 54 | 34 | 2.9 | Workable |
| Dec | 43 | 27 | 3.4 | Cold |
Wheeling labor market for gutters
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Wheeling is 1.10 times the national level.
For sheet metal workers (47-2211, weighted 40%) the local median is $35.52 an hour, which is 20% above the national $29.71. The middle half of them earn between $23.09 and $36.94 an hour. BLS counts 60 of them working in the area, 10.3 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
For roofers (47-2181, weighted 30%) the local median is $28.96 an hour, which is 9% above the national $26.65. The middle half of them earn between $22.05 and $33.57 an hour. BLS counts 110 of them working in the area, 18.9 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $22.02 an hour, in line with the US median of $22.66. The middle half of them earn between $17.93 and $29.72 an hour. About 450 work in the metro. That is 77.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($36.94 an hour) instead of the median, the labor line grows by about $20. At the 25th percentile ($23.09) it shrinks by about $170. The total moves by 0.7% or 6.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 58,130 jobs in the Wheeling area. That makes it the 294th largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $23.09 | $35.52 | $36.94 | $29.71 | 1.20 | metro |
| Roofers (47-2181) | 30% | $22.05 | $28.96 | $33.57 | $26.65 | 1.09 | metro |
| Construction laborers (47-2061) | 30% | $17.93 | $22.02 | $29.72 | $22.66 | 0.97 | metro |
| Blended | 100% | 1.10 | |||||
Specs and site conditions that change a Wheeling bid
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
What nearby projects cost in Wheeling
Because every project leans on different trades, Wheeling's wage level does not move all prices equally. Against the US midpoint, metal roof runs +4% and attic insulation −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,350 – $12,700 | +3% |
| Metal roof | 2,000 sq ft of roof | $10,800 – $33,400 | +4% |
| Vinyl siding | 2,100 sq ft of wall | $7,850 – $23,600 | −6% |
| French drain | 60 linear ft | $570 – $2,000 | −5% |
| Attic insulation | 1,000 sq ft | $870 – $3,600 | −11% |
How Wheeling compares
Same job, same size (160 linear ft), priced for the nearest metros. Akron is the priciest of the group at $2,800. Youngstown is the cheapest at $2,600.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Wheeling, WVthis page | $1,300 – $4,200 | $2,750 | |
| Canton, OH55 miles | $1,350 – $4,250 | $2,800 | level |
| Pittsburgh, PA60 miles | $1,250 – $4,200 | $2,750 | −2% |
| Morgantown, WV65 miles | $1,250 – $4,150 | $2,700 | −2% |
| Youngstown, OH85 miles | $1,200 – $3,950 | $2,600 | −6% |
| Akron, OH85 miles | $1,350 – $4,250 | $2,800 | +1% |
| West Virginia (statewide) | $1,250 – $4,100 | $2,700 | −3% |
| United States | $1,300 – $4,200 | $2,750 | −1% |
Across 300 US metros, Wheeling comes in at #105 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Wheeling is 3% above the West Virginia figure.
Other West Virginia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Huntington, WV | 140,740 jobs | $1,300 – $4,150 | $2,700 | −2% |
| Charleston, WV | 103,450 jobs | $1,250 – $4,100 | $2,700 | −3% |
| Morgantown, WV | 67,370 jobs | $1,250 – $4,150 | $2,700 | −2% |
Cities with a workforce like Wheeling's
Big cities and small ones price differently, so here is Wheeling against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albany, GA | 58,390 jobs | $1,100 – $3,700 | $2,400 | −14% |
| Sebastian, FL | 57,620 jobs | $1,200 – $3,900 | $2,550 | −8% |
| Dubuque, IA | 58,470 jobs | $1,250 – $4,000 | $2,650 | −5% |
| Texarkana, TX | 57,580 jobs | $1,100 – $3,700 | $2,400 | −13% |
Wheeling: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Wheeling wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,300 to $2,500
Vinyl or sectional aluminum, single story
Standard
$2,200 to $3,350
Seamless aluminum K-style, standard downspouts
Premium
$3,050 to $4,200
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $990 – $1,900 | $1,650 – $2,550 | $2,300 – $3,200 |
| average house (160 linear ft) | $1,300 – $2,500 | $2,200 – $3,350 | $3,050 – $4,200 |
| large house (240 linear ft) | $2,000 – $3,700 | $3,250 – $4,950 | $4,550 – $6,250 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,200 to $3,350 for Wheeling, WV is attached.
Take this estimate with you: PDF report, $9
The report lays out the gutters numbers for Wheeling, WV line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Wheeling: your questions
+How much does it cost to install gutters in Wheeling?
For 160 linear ft, expect $1,300 to $4,200 in the Wheeling area. A standard-spec job lands at $2,200 to $3,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Wheeling?
About $8.25 to $25.50 per linear ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Wheeling or Canton?
Canton is 55 miles away. The midpoint for 160 linear ft there is $2,800, which is 0% more than Wheeling ($2,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Wheeling?
About 41% at the midpoint, or $1,150 out of $2,750. Materials are 56% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Wheeling?
$1,300 to $4,200. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Wheeling?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Wheeling area (our national range of $0 to $200 scaled by the local price level).
+Is Wheeling expensive for gutters compared with the rest of West Virginia?
Wheeling is 3% above the West Virginia statewide estimate ($2,700 at the midpoint). We cover 4 metros in West Virginia; see the state page to compare them.
+What do sheet metal workers earn in Wheeling?
The BLS median is $35.52 an hour in the Wheeling area, compared with $29.71 nationally. The 25th to 75th percentile range is $23.09 to $36.94.
+What do basic and premium gutters work cost in Wheeling?
For 160 linear ft, basic work runs $1,300 to $2,500 and premium work $3,050 to $4,200. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Wheeling?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Wheeling
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.