Gutters cost in Rockford, IL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,400 – $4,350
- Per linear ft
- $8.70 – $26
- before permit
- Versus US midpoint
- +5%
- US $2,750
- Rank of 300 metros
- #62
- 1 = most expensive
Local price for new gutters in the Rockford area: $1,400 to $4,350 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% higher than the US figure. Sheet metal workers earn a median of $37.81 an hour in the Rockford area, 27% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Rockford, IL, standard level
$2,300 to $3,450
About $14 to $21 per linear ft before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,850 |
| Labor | $1,100 | $1,500 |
| Permits and fees | $55 | $130 |
| Total | $2,300 | $3,450 |
Cost breakdown for 160 linear ft in Rockford, IL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $600 | $1,500 | $2,400 | 52% |
| Labor | $790 | $1,300 | $1,800 | 45% |
| Permits and fees | $0 | $90 | $180 | 3% |
| Total | $1,400 | $2,850 | $4,350 | 100% |
Where the Rockford price comes from
Labor is 45% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Rockford the blended ratio comes out at 1.23.
Materials are scaled with BEA's regional price parity for goods. Rockford is at 93.6 against 100 for the US, so a materials line of $1,600 nationally becomes $1,500 here (midpoint, 160 linear ft). Permits follow the all-items index of 92.2: $0 to $180.
The best months for gutters in Rockford
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Rockford Gtr Rockford Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Rockford are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Rockford gets about 37 inches of precipitation in a normal year, including roughly 37 inches of snow. The wettest months are May, June and August (5.2 inches in June). Inside the workable window, March and November are the driest, at 2.4 and 2.3 inches. The station averages about 15 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 29 | 15 | 1.6 | Cold |
| Feb | 33 | 18 | 1.6 | Cold |
| Mar | 47 | 28 | 2.4 | Workable |
| Apr | 60 | 39 | 3.8 | Workable |
| May | 71 | 50 | 4.2 | Workable |
| Jun | 81 | 60 | 5.2 | Workable |
| Jul | 84 | 64 | 3.8 | Workable |
| Aug | 82 | 62 | 4.2 | Workable |
| Sep | 75 | 54 | 3.6 | Workable |
| Oct | 62 | 42 | 2.6 | Workable |
| Nov | 47 | 31 | 2.3 | Workable |
| Dec | 34 | 20 | 1.9 | Cold |
Rockford against nearby metros and the rest of Illinois
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,800 to $3,000 across Rockford and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rockford, ILthis page | $1,400 – $4,350 | $2,850 | |
| Janesville, WI25 miles | $1,350 – $4,250 | $2,800 | −3% |
| Madison, WI60 miles | $1,350 – $4,300 | $2,800 | −2% |
| Kenosha, WI60 miles | $1,400 – $4,550 | $3,000 | +4% |
| Racine, WI70 miles | $1,350 – $4,300 | $2,800 | −2% |
| Milwaukee, WI70 miles | $1,350 – $4,300 | $2,850 | −1% |
| Illinois (statewide) | $1,550 – $4,850 | $3,200 | +11% |
| United States | $1,300 – $4,200 | $2,750 | −5% |
Out of the 300 metros we cover, Rockford ranks #62 for the cost of this job (#1 is the most expensive). Statewide, Rockford is 10% below the Illinois figure.
Elsewhere in Illinois
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chicago, IL | 4,513,280 jobs | $1,600 – $5,050 | $3,350 | +16% |
| Peoria, IL | 166,020 jobs | $1,500 – $4,550 | $3,000 | +5% |
| Champaign, IL | 105,500 jobs | $1,450 – $4,450 | $2,950 | +3% |
| Springfield, IL | 100,810 jobs | $1,500 – $4,600 | $3,050 | +6% |
| Bloomington, IL | 88,110 jobs | $1,500 – $4,550 | $3,000 | +5% |
Metros of a similar size
Big cities and small ones price differently, so here is Rockford against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Cedar Rapids, IA | 139,260 jobs | $1,300 – $4,150 | $2,750 | −5% |
| Evansville, IN | 135,250 jobs | $1,350 – $4,250 | $2,800 | −3% |
| Huntington, WV | 140,740 jobs | $1,300 – $4,150 | $2,700 | −6% |
| Flint, MI | 135,040 jobs | $1,400 – $4,400 | $2,900 | +2% |
Who does the work: Rockford trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Rockford the blend is 1.23.
Sheet metal workers (47-2211), 40% of the weighting: a median of $37.81 an hour, 27% above the US median of $29.71. The middle half of them earn between $29.13 and $51.71 an hour. About 150 work in the metro. That is 10.9 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $31.30 an hour, 17% above the US median of $26.65. The middle half of them earn between $23.18 and $41.67 an hour. About 180 work in the metro. That is 13.1 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $28.07 an hour, which is 24% above the national $22.66. The middle half of them earn between $22.55 and $38.91 an hour. BLS counts 830 of them working in the area, 60.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $190 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 4.2% to 6.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Rockford has 137,650 jobs in total (BLS, May 2025), ranking 161st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $29.13 | $37.81 | $51.71 | $29.71 | 1.27 | metro |
| Roofers (47-2181) | 30% | $23.18 | $31.30 | $41.67 | $26.65 | 1.17 | metro |
| Construction laborers (47-2061) | 30% | $22.55 | $28.07 | $38.91 | $22.66 | 1.24 | metro |
| Blended | 100% | 1.23 | |||||
What nearby projects cost in Rockford
Jobs that often go together with gutters are priced below at their usual sizes, using the same Rockford wage and price inputs. Compared with national midpoints, French drain comes out highest (+13%) and attic insulation lowest (−2%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,800 – $13,400 | +9% |
| Metal roof | 2,000 sq ft of roof | $11,600 – $34,700 | +8% |
| Vinyl siding | 2,100 sq ft of wall | $9,050 – $27,200 | +8% |
| French drain | 60 linear ft | $680 – $2,350 | +13% |
| Attic insulation | 1,000 sq ft | $1,000 – $3,900 | −2% |
Specs and site conditions that change a Rockford bid
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Cost by quality level and size in Rockford
The cited range is split into basic, standard and premium bands, then scaled to Rockford. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,400 to $2,600
Vinyl or sectional aluminum, single story
Standard
$2,300 to $3,450
Seamless aluminum K-style, standard downspouts
Premium
$3,150 to $4,350
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,050 – $1,950 | $1,700 – $2,650 | $2,400 – $3,300 |
| average house (160 linear ft) | $1,400 – $2,600 | $2,300 – $3,450 | $3,150 – $4,350 |
| large house (240 linear ft) | $2,100 – $3,850 | $3,400 – $5,150 | $4,700 – $6,450 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,300 to $3,450 for Rockford, IL is attached.
Detailed gutters report for Rockford, IL, $9
The report lays out the gutters numbers for Rockford, IL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Rockford: your questions
+How much does it cost to install gutters in Rockford?
For 160 linear ft, expect $1,400 to $4,350 in the Rockford area. A standard-spec job lands at $2,300 to $3,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Rockford?
About $8.70 to $26 per linear ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Rockford or Janesville?
Janesville is 25 miles away. The midpoint for 160 linear ft there is $2,800, which is 3% less than Rockford ($2,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rockford?
About 45% at the midpoint, or $1,300 out of $2,850. Materials are 52% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Rockford?
$1,400 to $4,350. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Rockford?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Rockford area (our national range of $0 to $200 scaled by the local price level).
+Is Rockford expensive for gutters compared with the rest of Illinois?
Rockford is 10% below the Illinois statewide estimate ($3,200 at the midpoint). We cover 6 metros in Illinois; see the state page to compare them.
+What do sheet metal workers earn in Rockford?
The BLS median is $37.81 an hour in the Rockford area, compared with $29.71 nationally. The 25th to 75th percentile range is $29.13 to $51.71.
+What do basic and premium gutters work cost in Rockford?
For 160 linear ft, basic work runs $1,400 to $2,600 and premium work $3,150 to $4,350. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Rockford?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Rockford
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.