Skip to content
CostLocal

Gutters cost in Vallejo, CA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (160 linear ft)
$1,400 – $4,600
Per linear ft
$8.85 – $27.50
before permit
Versus US midpoint
+9%
US $2,750
Rank of 300 metros
#43
1 = most expensive

Local price for new gutters in the Vallejo area: $1,400 to $4,600 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% higher than the US figure. Sheet metal workers earn a median of $31.61 an hour in the Vallejo area, 6% above the US median of $29.71.

Estimate your gutters cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Seamless aluminum K-style, standard downspouts

Estimated cost for 160 linear ft in Vallejo, CA, standard level

$2,350 to $3,650

About $14.50 to $21.50 per linear ft before permits. Labor is about 40% of the bill.

Cost breakdown
PartLowHigh
Materials$1,300$2,100
Labor$1,000$1,400
Permits and fees$65$150
Total$2,350$3,650
Save and get a PDF report

Cost breakdown for 160 linear ft in Vallejo, CA

Part of the jobLowMidpointHighShare
Materials$670$1,700$2,70056%
Labor$740$1,200$1,65040%
Permits and fees$0$110$2204%
Total$1,400$3,000$4,600100%

What is behind the Vallejo number

The wage side of the estimate leans on sheet metal workers, who do 40% of the hours on a typical job. Their local median is $31.61 an hour. Add the other trades involved and the blended wage index for Vallejo is 1.16 (US = 1.00), which puts labor at 40% of the total.

Materials are scaled with BEA's regional price parity for goods. Vallejo is at 105.2 against 100 for the US, so a materials line of $1,600 nationally becomes $1,700 here (midpoint, 160 linear ft). Permits follow the all-items index of 108.5: $0 to $220.

What nearby projects cost in Vallejo

Jobs that often go together with gutters are priced below at their usual sizes, using the same Vallejo wage and price inputs. Compared with national midpoints, French drain comes out highest (+26%) and attic insulation lowest (+5%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,850 – $13,900+11%
Metal roof2,000 sq ft of roof$11,300 – $35,400+10%
Vinyl siding2,100 sq ft of wall$9,700 – $29,100+16%
French drain60 linear ft$760 – $2,650+26%
Attic insulation1,000 sq ft$1,050 – $4,200+5%

How Vallejo compares

Same job, same size (160 linear ft), priced for the nearest metros. San Francisco is the priciest of the group at $3,450. Stockton is the cheapest at $3,000.

Comparison with nearby areas
AreaRangeMidpointvs. here
Vallejo, CAthis page$1,400 – $4,600$3,000
Napa, CA25 miles$1,450 – $4,700$3,050+2%
San Francisco, CA40 miles$1,650 – $5,200$3,450+15%
Stockton, CA45 miles$1,400 – $4,550$3,000−1%
Santa Rosa, CA55 miles$1,450 – $4,650$3,050+2%
Sacramento, CA60 miles$1,450 – $4,650$3,050+2%
California (statewide)$1,450 – $4,700$3,100+3%
United States$1,300 – $4,200$2,750−9%

Out of the 300 metros we cover, Vallejo ranks #43 for the cost of this job (#1 is the most expensive). Statewide, Vallejo is 3% below the California figure.

Elsewhere in California

California metros compared with Vallejo
MetroSizeRangeMidpointvs. here
Los Angeles, CA6,271,560 jobs$1,450 – $4,650$3,050+2%
San Francisco, CA2,373,920 jobs$1,650 – $5,200$3,450+15%
Riverside, CA1,716,760 jobs$1,400 – $4,500$2,950−2%
San Diego, CA1,538,060 jobs$1,450 – $4,750$3,100+4%
San Jose, CA1,134,970 jobs$1,650 – $5,150$3,400+14%
Sacramento, CA1,080,590 jobs$1,450 – $4,650$3,050+2%

Metros of a similar size

Big cities and small ones price differently, so here is Vallejo against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Myrtle Beach, SC146,260 jobs$1,150 – $3,800$2,450−18%
Huntington, WV140,740 jobs$1,300 – $4,150$2,700−10%
Fargo, ND148,660 jobs$1,350 – $4,300$2,850−5%
Cedar Rapids, IA139,260 jobs$1,300 – $4,150$2,750−9%

Specs and site conditions that change a Vallejo bid

  • Permit

    Local building codes may add $50-$200, though most cities don't require one.

  • Material

    Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).

  • Seamless

    Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.

Who does the work: Vallejo trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Vallejo the blend is 1.16.

Sheet metal workers (47-2211), 40% of the weighting: a median of $31.61 an hour, 6% above the US median of $29.71. The middle half of them earn between $24.46 and $38.24 an hour. About 120 work in the metro. That is 8.3 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.

Roofers (47-2181), 30% of the weighting: a median of $29.85 an hour, 12% above the US median of $26.65. The middle half of them earn between $29.48 and $37.51 an hour. About 650 work in the metro. That is 45.1 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $30.05 an hour, which is 33% above the national $22.66. The middle half of them earn between $24.06 and $37.35 an hour. BLS counts 1,080 of them working in the area, 74.9 for every 10,000 jobs (US: 70.5), so the local bench is about average.

A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $95 to the midpoint estimate; the 25th percentile takes off about $100. That is a swing of roughly 3.3% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Vallejo has 144,130 jobs in total (BLS, May 2025), ranking 158th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Sheet metal workers (47-2211)40%$24.46$31.61$38.24$29.711.06metro
Roofers (47-2181)30%$29.48$29.85$37.51$26.651.12metro
Construction laborers (47-2061)30%$24.06$30.05$37.35$22.661.33metro
Blended100%1.16

Vallejo: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Vallejo. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).

Basic

$1,400 to $2,700

Vinyl or sectional aluminum, single story

Standard

$2,350 to $3,650

Seamless aluminum K-style, standard downspouts

Premium

$3,300 to $4,600

Steel or copper, two stories, custom length

Cost by size and quality level
SizeBasicStandardPremium
small house (120 linear ft)$1,050 – $2,050$1,800 – $2,750$2,500 – $3,500
average house (160 linear ft)$1,400 – $2,700$2,350 – $3,650$3,300 – $4,600
large house (240 linear ft)$2,100 – $4,000$3,500 – $5,350$4,900 – $6,750

The best months for gutters in Vallejo

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Napa Co Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

Weather is not a serious constraint for exterior installation in Vallejo: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.

Vallejo gets about 20 inches of precipitation in a normal year. The wettest months are January, February and December (4.2 inches in January). The station averages about 16 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Napa Co Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan57384.2Workable
Feb61404.0Workable
Mar64423.0Workable
Apr68441.3Workable
May73480.8Workable
Jun78520.2Workable
Jul79550.0Workable
Aug80540.0Workable
Sep80510.1Workable
Oct75460.9Workable
Nov65402.0Workable
Dec57383.8Workable

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,350 to $3,650 for Vallejo, CA is attached.

Take this estimate with you: PDF report, $9

The report lays out the gutters numbers for Vallejo, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Gutters in Vallejo: your questions

+How much does it cost to install gutters in Vallejo?

For 160 linear ft, expect $1,400 to $4,600 in the Vallejo area. A standard-spec job lands at $2,350 to $3,650. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for gutters in Vallejo?

About $8.85 to $27.50 per linear ft for materials and labor, plus $0 to $220 for the permit if one is needed. The US range is $8 to $25.

+Is gutters cheaper in Vallejo or Napa?

Napa is 25 miles away. The midpoint for 160 linear ft there is $3,050, which is 2% more than Vallejo ($3,000). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Vallejo?

About 40% at the midpoint, or $1,200 out of $3,000. Materials are 56% and permits 4%. Nationally, labor is 38%.

+What would average house (160 linear ft) cost in Vallejo?

$1,400 to $4,600. Pick a different size in the estimator above to get your own number.

+Does gutters need a permit in Vallejo?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $220 for fees in the Vallejo area (our national range of $0 to $200 scaled by the local price level).

+Is Vallejo expensive for gutters compared with the rest of California?

Vallejo is 3% below the California statewide estimate ($3,100 at the midpoint). We cover 23 metros in California; see the state page to compare them.

+What do sheet metal workers earn in Vallejo?

The BLS median is $31.61 an hour in the Vallejo area, compared with $29.71 nationally. The 25th to 75th percentile range is $24.46 to $38.24.

+What do basic and premium gutters work cost in Vallejo?

For 160 linear ft, basic work runs $1,400 to $2,700 and premium work $3,300 to $4,600. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.

+Is there a bad season to install gutters in Vallejo?

Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.

Gutters near Vallejo

Gutters: all pricesGutters in CaliforniaAll projects in VallejoCalifornia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.