Skip to content
CostLocal

Gutters cost in Napa, CA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (160 linear ft)
$1,450 – $4,700
Per linear ft
$9.10 – $28
before permit
Versus US midpoint
+12%
US $2,750
Rank of 300 metros
#20
1 = most expensive

If you want to install gutters in Napa, plan on $1,450 to $4,700 for 160 linear ft, all in. Per linear ft, that is $9.10 to $28 for materials and labor, with the permit on top. The local midpoint runs 12% higher than the national one. Sheet metal workers earn a median of $36.82 an hour in the Napa area, 24% above the US median of $29.71.

Estimate your gutters cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Seamless aluminum K-style, standard downspouts

Estimated cost for 160 linear ft in Napa, CA, standard level

$2,400 to $3,700

About $14.50 to $22 per linear ft before permits. Labor is about 41% of the bill.

Cost breakdown
PartLowHigh
Materials$1,300$2,100
Labor$1,050$1,450
Permits and fees$70$160
Total$2,400$3,700
Save and get a PDF report

Cost breakdown for 160 linear ft in Napa, CA

Part of the jobLowMidpointHighShare
Materials$670$1,700$2,70055%
Labor$780$1,250$1,75041%
Permits and fees$0$110$2304%
Total$1,450$3,050$4,700100%

Where the Napa price comes from

We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Napa wages are 1.22 times the national level. Labor makes up about 41% of the midpoint estimate (38% at national prices). BLS does not publish this trade for the metro, so we used the California statewide median.

On the materials line, the BEA goods price index for the Napa metro is 105.2 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,700, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (112.6) and land at $0 to $230.

Data note: 70% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Napa. The wage table below marks each row.

Cost by quality level and size in Napa

Three bands are cut from the same cited range and localized for Napa wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$1,450 to $2,750

Vinyl or sectional aluminum, single story

Standard

$2,400 to $3,700

Seamless aluminum K-style, standard downspouts

Premium

$3,400 to $4,700

Steel or copper, two stories, custom length

Cost by size and quality level
SizeBasicStandardPremium
small house (120 linear ft)$1,100 – $2,100$1,850 – $2,800$2,550 – $3,550
average house (160 linear ft)$1,450 – $2,750$2,400 – $3,700$3,400 – $4,700
large house (240 linear ft)$2,200 – $4,050$3,600 – $5,500$5,000 – $6,900

Gutters: what moves the price in Napa

  • Material

    Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).

  • Seamless

    Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.

  • Stories

    Two-story homes add $1-$3 per linear foot for ladders and fall protection.

Napa labor market for gutters

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Napa is 1.22 times the national level.

Sheet metal workers (47-2211) carry 40% of the labor weighting. BLS does not publish this trade for the Napa metro, so we used the California statewide median: $36.82 an hour against $29.71 for the US. The middle half of them earn between $28.47 and $51.62 an hour.

Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the Napa metro, so we used the California statewide median: $30.58 an hour against $26.65 for the US. The middle half of them earn between $28.57 and $36.27 an hour.

Construction laborers (47-2061), 30% of the weighting: a median of $28.75 an hour, 27% above the US median of $22.66. The middle half of them earn between $23.80 and $36.35 an hour. About 540 work in the metro. That is 69.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($51.62 an hour) instead of the median, the labor line grows by about $210. At the 25th percentile ($28.47) it shrinks by about $120. The total moves by 6.8% or 3.8%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 77,860 jobs in the Napa area. That makes it the 242nd largest of the 300 metros we cover, with 0.05% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Sheet metal workers (47-2211)40%$28.47$36.82$51.62$29.711.24state
Roofers (47-2181)30%$28.57$30.58$36.27$26.651.15state
Construction laborers (47-2061)30%$23.80$28.75$36.35$22.661.27metro
Blended100%1.22

What nearby projects cost in Napa

Because every project leans on different trades, Napa's wage level does not move all prices equally. Against the US midpoint, French drain runs +23% and attic insulation +5%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,900 – $14,000+12%
Metal roof2,000 sq ft of roof$11,700 – $36,200+12%
Vinyl siding2,100 sq ft of wall$9,900 – $29,700+18%
French drain60 linear ft$740 – $2,600+23%
Attic insulation1,000 sq ft$1,050 – $4,200+5%

Is Napa cheap or dear? The local comparison

Same job, same size (160 linear ft), priced for the nearest metros. San Francisco is the priciest of the group at $3,450. Stockton is the cheapest at $3,000.

Comparison with nearby areas
AreaRangeMidpointvs. here
Napa, CAthis page$1,450 – $4,700$3,050
Vallejo, CA25 miles$1,400 – $4,600$3,000−2%
Santa Rosa, CA30 miles$1,450 – $4,650$3,050level
San Francisco, CA50 miles$1,650 – $5,200$3,450+12%
Stockton, CA70 miles$1,400 – $4,550$3,000−3%
Sacramento, CA75 miles$1,450 – $4,650$3,050level
California (statewide)$1,450 – $4,700$3,100+1%
United States$1,300 – $4,200$2,750−11%

Across 300 US metros, Napa comes in at #20 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Napa is 1% below the California figure.

Other California metros

California metros compared with Napa
MetroSizeRangeMidpointvs. here
Los Angeles, CA6,271,560 jobs$1,450 – $4,650$3,050level
San Francisco, CA2,373,920 jobs$1,650 – $5,200$3,450+12%
Riverside, CA1,716,760 jobs$1,400 – $4,500$2,950−4%
San Diego, CA1,538,060 jobs$1,450 – $4,750$3,100+1%
San Jose, CA1,134,970 jobs$1,650 – $5,150$3,400+11%
Sacramento, CA1,080,590 jobs$1,450 – $4,650$3,050level

Cities with a workforce like Napa's

Big cities and small ones price differently, so here is Napa against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Chico, CA78,220 jobs$1,400 – $4,600$3,000−2%
Racine, WI76,280 jobs$1,350 – $4,300$2,800−8%
Merced, CA79,510 jobs$1,400 – $4,600$3,000−2%
Warner Robins, GA76,050 jobs$1,250 – $4,050$2,650−14%

Climate in Napa: timing your gutters job

We use NOAA's 1991-2020 climate normals for Napa State Hospital (5 miles from the city center). These are 30-year monthly averages, not forecasts.

Weather is not a serious constraint for exterior installation in Napa: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.

Napa gets about 27 inches of precipitation in a normal year. The wettest months are January, February and December (5.5 inches in December). The station averages about 33 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Napa State Hospital (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan59405.0Workable
Feb63425.1Workable
Mar68443.7Workable
Apr72461.7Workable
May77501.1Workable
Jun82540.3Workable
Jul83560.0Workable
Aug84560.1Workable
Sep84530.1Workable
Oct78491.3Workable
Nov66442.8Workable
Dec59405.5Workable

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,400 to $3,700 for Napa, CA is attached.

Detailed gutters report for Napa, CA, $9

The report lays out the gutters numbers for Napa, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Gutters in Napa: your questions

+How much does it cost to install gutters in Napa?

For 160 linear ft, expect $1,450 to $4,700 in the Napa area. A standard-spec job lands at $2,400 to $3,700. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for gutters in Napa?

About $9.10 to $28 per linear ft for materials and labor, plus $0 to $230 for the permit if one is needed. The US range is $8 to $25.

+Is gutters cheaper in Napa or Vallejo?

Vallejo is 25 miles away. The midpoint for 160 linear ft there is $3,000, which is 2% less than Napa ($3,050). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Napa?

About 41% at the midpoint, or $1,250 out of $3,050. Materials are 55% and permits 4%. Nationally, labor is 38%.

+What would average house (160 linear ft) cost in Napa?

$1,450 to $4,700. Pick a different size in the estimator above to get your own number.

+Does gutters need a permit in Napa?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $230 for fees in the Napa area (our national range of $0 to $200 scaled by the local price level).

+Is Napa expensive for gutters compared with the rest of California?

Napa is 1% below the California statewide estimate ($3,100 at the midpoint). We cover 23 metros in California; see the state page to compare them.

+What do sheet metal workers earn in Napa?

BLS has no published metro figure here, so we use the statewide median of $36.82 an hour, compared with $29.71 nationally. The 25th to 75th percentile range is $28.47 to $51.62.

+What do basic and premium gutters work cost in Napa?

For 160 linear ft, basic work runs $1,450 to $2,750 and premium work $3,400 to $4,700. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.

+Is there a bad season to install gutters in Napa?

Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.

Gutters near Napa

Gutters: all pricesGutters in CaliforniaAll projects in NapaCalifornia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.