Gutters cost in Columbus, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,350 – $4,250
- Per linear ft
- $8.35 – $25.50
- before permit
- Versus US midpoint
- +2%
- US $2,750
- Rank of 300 metros
- #90
- 1 = most expensive
Local price for new gutters in the Columbus area: $1,350 to $4,250 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Sheet metal workers earn a median of $37.39 an hour in the Columbus area, 26% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Columbus, OH, standard level
$2,200 to $3,400
About $13.50 to $20.50 per linear ft before permits. Labor is about 43% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,850 |
| Labor | $1,000 | $1,400 |
| Permits and fees | $55 | $130 |
| Total | $2,200 | $3,400 |
Cost breakdown for 160 linear ft in Columbus, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $600 | $1,500 | $2,400 | 54% |
| Labor | $740 | $1,200 | $1,650 | 43% |
| Permits and fees | $0 | $95 | $190 | 3% |
| Total | $1,350 | $2,800 | $4,250 | 100% |
Where the Columbus price comes from
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Columbus wages are 1.16 times the national level. Labor makes up about 43% of the midpoint estimate (38% at national prices).
Materials are scaled with BEA's regional price parity for goods. Columbus is at 93.6 against 100 for the US, so a materials line of $1,600 nationally becomes $1,500 here (midpoint, 160 linear ft). Permits follow the all-items index of 95.5: $0 to $190.
The best months for gutters in Columbus
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Columbus Port Columbus Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Columbus are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Columbus gets about 42 inches of precipitation in a normal year, including roughly 28 inches of snow. The wettest months are May, June and July (4.7 inches in July). Inside the workable window, October and November are the driest, at 2.9 and 2.8 inches. The station averages about 21 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 22 | 3.0 | Cold |
| Feb | 41 | 24 | 2.4 | Cold |
| Mar | 51 | 32 | 3.6 | Workable |
| Apr | 64 | 42 | 3.9 | Workable |
| May | 74 | 52 | 4.0 | Workable |
| Jun | 82 | 62 | 4.3 | Workable |
| Jul | 85 | 65 | 4.7 | Workable |
| Aug | 84 | 64 | 3.7 | Workable |
| Sep | 78 | 57 | 3.1 | Workable |
| Oct | 66 | 45 | 2.9 | Workable |
| Nov | 52 | 35 | 2.8 | Workable |
| Dec | 42 | 27 | 3.1 | Cold |
Columbus: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Columbus. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,350 to $2,500
Vinyl or sectional aluminum, single story
Standard
$2,200 to $3,400
Seamless aluminum K-style, standard downspouts
Premium
$3,100 to $4,250
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,000 – $1,900 | $1,650 – $2,550 | $2,350 – $3,250 |
| average house (160 linear ft) | $1,350 – $2,500 | $2,200 – $3,400 | $3,100 – $4,250 |
| large house (240 linear ft) | $2,000 – $3,700 | $3,300 – $5,000 | $4,550 – $6,300 |
Related projects, priced for Columbus
Jobs that often go together with gutters are priced below at their usual sizes, using the same Columbus wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+16%) and roof replacement lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,800 – $11,800 | −5% |
| Metal roof | 2,000 sq ft of roof | $10,000 – $31,500 | −3% |
| Vinyl siding | 2,100 sq ft of wall | $8,850 – $26,500 | +5% |
| French drain | 60 linear ft | $680 – $2,400 | +14% |
| Attic insulation | 1,000 sq ft | $1,250 – $4,550 | +16% |
Is Columbus cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Columbus. Huntington is the lowest at about $2,700 (midpoint, 160 linear ft), 110 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Columbus, OHthis page | $1,350 – $4,250 | $2,800 | |
| Dayton, OH70 miles | $1,300 – $4,150 | $2,700 | −3% |
| Canton, OH100 miles | $1,350 – $4,250 | $2,800 | level |
| Wheeling, WV105 miles | $1,300 – $4,200 | $2,750 | −1% |
| Cincinnati, OH105 miles | $1,300 – $4,150 | $2,750 | −2% |
| Huntington, WV110 miles | $1,300 – $4,150 | $2,700 | −3% |
| Ohio (statewide) | $1,300 – $4,200 | $2,750 | −2% |
| United States | $1,300 – $4,200 | $2,750 | −2% |
Out of the 300 metros we cover, Columbus ranks #90 for the cost of this job (#1 is the most expensive). Statewide, Columbus is 2% above the Ohio figure.
Elsewhere in Ohio
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Cincinnati, OH | 1,101,030 jobs | $1,300 – $4,150 | $2,750 | −2% |
| Cleveland, OH | 1,031,130 jobs | $1,350 – $4,250 | $2,800 | level |
| Dayton, OH | 372,660 jobs | $1,300 – $4,150 | $2,700 | −3% |
| Akron, OH | 319,560 jobs | $1,350 – $4,250 | $2,800 | level |
| Toledo, OH | 291,530 jobs | $1,350 – $4,250 | $2,800 | +1% |
| Canton, OH | 163,080 jobs | $1,350 – $4,250 | $2,800 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Columbus against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Pittsburgh, PA | 1,114,490 jobs | $1,250 – $4,200 | $2,750 | −3% |
| Indianapolis, IN | 1,105,170 jobs | $1,250 – $4,100 | $2,700 | −4% |
| San Antonio, TX | 1,126,880 jobs | $1,150 – $3,850 | $2,500 | −11% |
| Cincinnati, OH | 1,101,030 jobs | $1,300 – $4,150 | $2,750 | −2% |
Why two Columbus quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Who does the work: Columbus trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Columbus the blend is 1.16.
Sheet metal workers (47-2211), 40% of the weighting: a median of $37.39 an hour, 26% above the US median of $29.71. The middle half of them earn between $27.81 and $40.60 an hour. About 760 work in the metro. That is 6.9 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
Roofers (47-2181), 30% of the weighting: a median of $23.76 an hour, 11% below the US median of $26.65. The middle half of them earn between $22.33 and $30.02 an hour. About 700 work in the metro. That is 6.3 per 10,000 jobs, compared with 8.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $29.11 an hour, which is 28% above the national $22.66. The middle half of them earn between $22.96 and $37.18 an hour. BLS counts 5,590 of them working in the area, 50.6 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $45 to the midpoint estimate; the 25th percentile takes off about $130. That is a swing of roughly 4.8% to 1.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Columbus has 1,105,580 jobs in total (BLS, May 2025), ranking 30th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $27.81 | $37.39 | $40.60 | $29.71 | 1.26 | metro |
| Roofers (47-2181) | 30% | $22.33 | $23.76 | $30.02 | $26.65 | 0.89 | metro |
| Construction laborers (47-2061) | 30% | $22.96 | $29.11 | $37.18 | $22.66 | 1.28 | metro |
| Blended | 100% | 1.16 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,200 to $3,400 for Columbus, OH is attached.
Detailed gutters report for Columbus, OH, $9
The report lays out the gutters numbers for Columbus, OH line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Columbus: your questions
+How much does it cost to install gutters in Columbus?
For 160 linear ft, expect $1,350 to $4,250 in the Columbus area. A standard-spec job lands at $2,200 to $3,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Columbus?
About $8.35 to $25.50 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Columbus or Dayton?
Dayton is 70 miles away. The midpoint for 160 linear ft there is $2,700, which is 3% less than Columbus ($2,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Columbus?
About 43% at the midpoint, or $1,200 out of $2,800. Materials are 54% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Columbus?
$1,350 to $4,250. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Columbus?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Columbus area (our national range of $0 to $200 scaled by the local price level).
+Is Columbus expensive for gutters compared with the rest of Ohio?
Columbus is 2% above the Ohio statewide estimate ($2,750 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do sheet metal workers earn in Columbus?
The BLS median is $37.39 an hour in the Columbus area, compared with $29.71 nationally. The 25th to 75th percentile range is $27.81 to $40.60.
+What do basic and premium gutters work cost in Columbus?
For 160 linear ft, basic work runs $1,350 to $2,500 and premium work $3,100 to $4,250. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Columbus?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Columbus
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.