Asphalt driveway cost in Longview, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,750 – $6,600
- Per sq ft
- $4.50 – $10.50
- before permit
- Versus US midpoint
- −11%
- US $5,250
- Rank of 300 metros
- #275
- 1 = most expensive
If you want to pave a driveway in Longview, plan on $2,750 to $6,600 for 600 sq ft, all in. Per sq ft, that is $4.50 to $10.50 for materials and labor, with the permit on top. The local midpoint runs 11% lower than the national one. Paving, surfacing and tamping equipment operators earn a median of $22.63 an hour in the Longview area, 12% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Longview, TX, standard level
$3,900 to $5,450
About $6.35 to $8.85 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $3,150 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $85 | $140 |
| Total | $3,900 | $5,450 |
Cost breakdown for 600 sq ft in Longview, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,850 | $2,800 | $3,700 | 60% |
| Labor | $850 | $1,800 | $2,700 | 38% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $2,750 | $4,650 | $6,600 | 100% |
Why Longview prices look the way they do
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $22.63 an hour. Add the other trades involved and the blended wage index for Longview is 0.83 (US = 1.00), which puts labor at 38% of the total. BLS does not publish this trade for the metro, so we used the Texas statewide median.
On the materials line, the BEA goods price index for the Longview metro is 93.8 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,800, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (89.5) and land at $45 to $180.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Longview. The wage table below marks each row.
Longview against nearby metros and the rest of Texas
Same job, same size (600 sq ft), priced for the nearest metros. Dallas is the priciest of the group at $5,100. Tyler is the cheapest at $4,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Longview, TXthis page | $2,750 – $6,600 | $4,650 | |
| Tyler, TX35 miles | $2,650 – $6,350 | $4,500 | −4% |
| Shreveport, LA55 miles | $2,800 – $6,700 | $4,750 | +1% |
| Texarkana, TX75 miles | $2,750 – $6,550 | $4,650 | −1% |
| Dallas, TX135 miles | $3,000 – $7,250 | $5,100 | +10% |
| Alexandria, LA145 miles | $2,750 – $6,550 | $4,650 | −1% |
| Texas (statewide) | $2,850 – $6,900 | $4,900 | +4% |
| United States | $3,050 – $7,400 | $5,250 | +12% |
Across 300 US metros, Longview comes in at #275 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Longview is 4% below the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $3,000 – $7,250 | $5,100 | +10% |
| Houston, TX | 3,289,720 jobs | $2,950 – $7,000 | $4,950 | +6% |
| Austin, TX | 1,293,690 jobs | $2,800 – $6,850 | $4,850 | +3% |
| San Antonio, TX | 1,126,880 jobs | $2,750 – $6,650 | $4,700 | +1% |
| El Paso, TX | 339,120 jobs | $2,650 – $6,350 | $4,500 | −4% |
| McAllen, TX | 296,700 jobs | $2,650 – $6,250 | $4,450 | −5% |
Cities with a workforce like Longview's
Big cities and small ones price differently, so here is Longview against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Utica, NY | 118,390 jobs | $3,150 – $7,650 | $5,400 | +16% |
| Columbus, GA | 116,380 jobs | $2,800 – $6,600 | $4,700 | level |
| Greeley, CO | 119,540 jobs | $3,050 – $7,500 | $5,250 | +13% |
| Topeka, KS | 115,750 jobs | $2,850 – $6,950 | $4,900 | +5% |
Add-ons priced for Longview
Extras are quoted nationally and then scaled to Longview by the average of the local wage index (0.83) and goods index (0.94), a factor of 0.89. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $530 – $1,050 |
Climate in Longview: timing your asphalt driveway job
We use NOAA's 1991-2020 climate normals for Longview #2 (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Longview (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Longview gets about 51 inches of precipitation in a normal year. The wettest months are March, April and December (5.3 inches in December). Inside the workable window, January and November are the driest, at 4.2 and 3.4 inches. The station averages about 112 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 36 | 4.2 | Workable |
| Feb | 62 | 40 | 4.3 | Workable |
| Mar | 71 | 47 | 5.0 | Workable |
| Apr | 78 | 54 | 5.0 | Workable |
| May | 85 | 63 | 4.7 | Workable |
| Jun | 92 | 71 | 4.0 | Hot |
| Jul | 95 | 74 | 3.3 | Hot |
| Aug | 96 | 74 | 2.9 | Hot |
| Sep | 90 | 67 | 3.9 | Hot |
| Oct | 80 | 56 | 4.5 | Workable |
| Nov | 68 | 45 | 3.4 | Workable |
| Dec | 60 | 38 | 5.3 | Workable |
Cost by quality level and size in Longview
Three bands are cut from the same cited range and localized for Longview wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,750 to $4,300
New topcoat over a sound base, flat lot
Standard
$3,900 to $5,450
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,050 to $6,600
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,750 | $1,600 – $2,250 | $2,100 – $2,750 |
| 20x20 (400 sq ft) | $1,850 – $2,900 | $2,650 – $3,650 | $3,400 – $4,450 |
| 2-car (20x30), 600 sq ft | $2,750 – $4,300 | $3,900 – $5,450 | $5,050 – $6,600 |
| long rural (10x100), 1,000 sq ft | $4,550 – $7,100 | $6,450 – $9,000 | $8,350 – $10,900 |
What nearby projects cost in Longview
Because every project leans on different trades, Longview's wage level does not move all prices equally. Against the US midpoint, paver patio runs −12% and concrete driveway −16%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,100 – $7,650 | −16% |
| Gravel driveway | 1,000 sq ft | $2,150 – $8,900 | −13% |
| Paver patio | 300 sq ft | $2,650 – $4,800 | −12% |
| French drain | 60 linear ft | $520 – $1,850 | −13% |
| Concrete slab | 400 sq ft | $2,100 – $4,550 | −13% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
Why two Longview quotes can differ
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Longview labor market for asphalt driveway
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Longview is 0.83 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Longview metro, so we used the Texas statewide median: $22.63 an hour against $25.64 for the US. The middle half of them earn between $20.01 and $26.25 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $18.19 an hour, 20% below the US median of $22.66. The middle half of them earn between $16.53 and $22.15 an hour. About 1,610 work in the metro. That is 136.4 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.09 an hour, which is 20% below the national $28.78. The middle half of them earn between $21.75 and $26.79 an hour. BLS counts 750 of them working in the area, 63.5 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($26.25 an hour) instead of the median, the labor line grows by about $120. At the 25th percentile ($20.01) it shrinks by about $85. The total moves by 2.6% or 1.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 118,060 jobs in the Longview area. That makes it the 186th largest of the 300 metros we cover, with 0.08% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $20.01 | $22.63 | $26.25 | $25.64 | 0.88 | state |
| Construction laborers (47-2061) | 30% | $16.53 | $18.19 | $22.15 | $22.66 | 0.80 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $21.75 | $23.09 | $26.79 | $28.78 | 0.80 | metro |
| Blended | 100% | 0.83 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,900 to $5,450 for Longview, TX is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Longview, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Longview: your questions
+How much does it cost to pave a driveway in Longview?
For 600 sq ft, expect $2,750 to $6,600 in the Longview area. A standard-spec job lands at $3,900 to $5,450. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Longview?
About $4.50 to $10.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Longview or Tyler?
Tyler is 35 miles away. The midpoint for 600 sq ft there is $4,500, which is 4% less than Longview ($4,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Longview?
About 38% at the midpoint, or $1,800 out of $4,650. Materials are 60% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Longview?
$2,750 to $6,600. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Longview?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Longview area (our national range of $50 to $200 scaled by the local price level).
+Is Longview expensive for asphalt driveway compared with the rest of Texas?
Longview is 4% below the Texas statewide estimate ($4,900 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Longview?
BLS has no published metro figure here, so we use the statewide median of $22.63 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $20.01 to $26.25.
+What do basic and premium asphalt driveway work cost in Longview?
For 600 sq ft, basic work runs $2,750 to $4,300 and premium work $5,050 to $6,600. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Longview?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. January and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Longview?
$530 to $1,050 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Longview
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.