Asphalt driveway cost in Tyler, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,650 – $6,350
- Per sq ft
- $4.40 – $10.50
- before permit
- Versus US midpoint
- −14%
- US $5,250
- Rank of 300 metros
- #297
- 1 = most expensive
An asphalt driveway in Tyler, TX usually costs $2,650 to $6,350 for 600 sq ft. That works out to about $4.40 to $10.50 per sq ft before permits. Compared with the national midpoint that is $710 less. Paving, surfacing and tamping equipment operators earn a median of $18.09 an hour in the Tyler area, 29% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Tyler, TX, standard level
$3,800 to $5,250
About $6.15 to $8.50 per sq ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $3,150 |
| Labor | $1,250 | $1,950 |
| Permits and fees | $90 | $140 |
| Total | $3,800 | $5,250 |
Cost breakdown for 600 sq ft in Tyler, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,850 | $2,800 | $3,700 | 62% |
| Labor | $770 | $1,600 | $2,450 | 36% |
| Permits and fees | $45 | $120 | $180 | 3% |
| Total | $2,650 | $4,500 | $6,350 | 100% |
Where the Tyler price comes from
Labor is 36% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Tyler the blended ratio comes out at 0.76.
Materials are scaled with BEA's regional price parity for goods. Tyler is at 93.8 against 100 for the US, so a materials line of $2,950 nationally becomes $2,800 here (midpoint, 600 sq ft). Permits follow the all-items index of 92.2: $45 to $180.
What nearby projects cost in Tyler
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Tyler wage and price inputs. Compared with national midpoints, paver patio comes out highest (−11%) and concrete driveway lowest (−16%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,100 – $7,650 | −16% |
| Gravel driveway | 1,000 sq ft | $2,150 – $8,800 | −14% |
| Paver patio | 300 sq ft | $2,650 – $4,850 | −11% |
| French drain | 60 linear ft | $530 – $1,850 | −12% |
| Concrete slab | 400 sq ft | $2,100 – $4,600 | −12% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
Pick a size, pick a tier: asphalt driveway pricing in Tyler
The cited range is split into basic, standard and premium bands, then scaled to Tyler. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$2,650 to $4,150
New topcoat over a sound base, flat lot
Standard
$3,800 to $5,250
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$4,900 to $6,350
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,100 – $1,700 | $1,550 – $2,200 | $2,050 – $2,650 |
| 20x20 (400 sq ft) | $1,800 – $2,800 | $2,550 – $3,550 | $3,300 – $4,300 |
| 2-car (20x30), 600 sq ft | $2,650 – $4,150 | $3,800 – $5,250 | $4,900 – $6,350 |
| long rural (10x100), 1,000 sq ft | $4,450 – $6,850 | $6,250 – $8,650 | $8,050 – $10,500 |
Tyler weather and the asphalt driveway calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Tyler (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Tyler are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Tyler gets about 48 inches of precipitation in a normal year. The wettest months are June, October and December (4.8 inches in June). Inside the workable window, September and November are the driest, at 3.2 and 3.8 inches. The station averages about 96 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 39 | 4.0 | Workable |
| Feb | 63 | 42 | 4.3 | Workable |
| Mar | 70 | 49 | 4.3 | Workable |
| Apr | 77 | 55 | 4.0 | Workable |
| May | 84 | 64 | 4.3 | Workable |
| Jun | 90 | 71 | 4.8 | Hot |
| Jul | 93 | 74 | 2.7 | Hot |
| Aug | 94 | 73 | 2.9 | Hot |
| Sep | 88 | 67 | 3.2 | Workable |
| Oct | 78 | 57 | 4.7 | Workable |
| Nov | 66 | 47 | 3.8 | Workable |
| Dec | 59 | 40 | 4.7 | Workable |
Why two Tyler quotes can differ
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
What local crews earn in Tyler
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tyler the blend is 0.76.
Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $18.09 an hour, 29% below the US median of $25.64. The middle half of them earn between $18.09 and $24.48 an hour. About 40 work in the metro. That is 3.5 per 10,000 jobs, compared with 2.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $18.13 an hour, which is 20% below the national $22.66. The middle half of them earn between $16.50 and $21.54 an hour. BLS counts 650 of them working in the area, 56.4 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $22.44 an hour, 22% below the US median of $28.78. The middle half of them earn between $20.15 and $26.77 an hour. About 290 work in the metro. That is 25.2 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $210 to the midpoint estimate; the 25th percentile takes off about $0. That is a swing of roughly 0.0% to 4.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tyler has 115,220 jobs in total (BLS, May 2025), ranking 189th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $18.09 | $18.09 | $24.48 | $25.64 | 0.71 | metro |
| Construction laborers (47-2061) | 30% | $16.50 | $18.13 | $21.54 | $22.66 | 0.80 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $20.15 | $22.44 | $26.77 | $28.78 | 0.78 | metro |
| Blended | 100% | 0.76 | |||||
Optional extras in Tyler
Add-ons start from national price ranges and are scaled by 0.85 for Tyler, which is the average of the area's wage index (0.76) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $510 – $1,000 |
Is Tyler cheap or dear? The local comparison
Of the five closest metros, none is cheaper than Tyler. Texarkana comes closest at about $4,650.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tyler, TXthis page | $2,650 – $6,350 | $4,500 | |
| Longview, TX35 miles | $2,750 – $6,600 | $4,650 | +4% |
| Shreveport, LA90 miles | $2,800 – $6,700 | $4,750 | +5% |
| Texarkana, TX100 miles | $2,750 – $6,550 | $4,650 | +3% |
| Dallas, TX105 miles | $3,000 – $7,250 | $5,100 | +14% |
| Waco, TX130 miles | $2,750 – $6,550 | $4,650 | +3% |
| Texas (statewide) | $2,850 – $6,900 | $4,900 | +8% |
| United States | $3,050 – $7,400 | $5,250 | +16% |
Out of the 300 metros we cover, Tyler ranks #297 for the cost of this job (#1 is the most expensive). Statewide, Tyler is 7% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $3,000 – $7,250 | $5,100 | +14% |
| Houston, TX | 3,289,720 jobs | $2,950 – $7,000 | $4,950 | +10% |
| Austin, TX | 1,293,690 jobs | $2,800 – $6,850 | $4,850 | +7% |
| San Antonio, TX | 1,126,880 jobs | $2,750 – $6,650 | $4,700 | +4% |
| El Paso, TX | 339,120 jobs | $2,650 – $6,350 | $4,500 | level |
| McAllen, TX | 296,700 jobs | $2,650 – $6,250 | $4,450 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Tyler against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Topeka, KS | 115,750 jobs | $2,850 – $6,950 | $4,900 | +9% |
| Charlottesville, VA | 114,780 jobs | $2,950 – $7,100 | $5,000 | +11% |
| Columbus, GA | 116,380 jobs | $2,800 – $6,600 | $4,700 | +4% |
| Laredo, TX | 109,370 jobs | $2,700 – $6,450 | $4,600 | +2% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,800 to $5,250 for Tyler, TX is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Tyler, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Tyler: your questions
+How much does it cost to pave a driveway in Tyler?
For 600 sq ft, expect $2,650 to $6,350 in the Tyler area. A standard-spec job lands at $3,800 to $5,250. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Tyler?
About $4.40 to $10.50 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Tyler or Longview?
Longview is 35 miles away. The midpoint for 600 sq ft there is $4,650, which is 4% more than Tyler ($4,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tyler?
About 36% at the midpoint, or $1,600 out of $4,500. Materials are 62% and permits 3%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Tyler?
$2,650 to $6,350. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Tyler?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Tyler area (our national range of $50 to $200 scaled by the local price level).
+Is Tyler expensive for asphalt driveway compared with the rest of Texas?
Tyler is 7% below the Texas statewide estimate ($4,900 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Tyler?
The BLS median is $18.09 an hour in the Tyler area, compared with $25.64 nationally. The 25th to 75th percentile range is $18.09 to $24.48.
+What do basic and premium asphalt driveway work cost in Tyler?
For 600 sq ft, basic work runs $2,650 to $4,150 and premium work $4,900 to $6,350. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Tyler?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Tyler?
$510 to $1,000 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Tyler
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.