Asphalt driveway cost in Toledo, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,000 – $7,400
- Per sq ft
- $4.95 – $12
- before permit
- Versus US midpoint
- −1%
- US $5,250
- Rank of 300 metros
- #137
- 1 = most expensive
Local price for an asphalt driveway in the Toledo area: $3,000 to $7,400 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Toledo, OH, standard level
$4,300 to $6,100
About $7.05 to $9.90 per sq ft before permits. Labor is about 44% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $3,150 |
| Labor | $1,800 | $2,800 |
| Permits and fees | $85 | $140 |
| Total | $4,300 | $6,100 |
Cost breakdown for 600 sq ft in Toledo, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,850 | $2,800 | $3,700 | 54% |
| Labor | $1,100 | $2,300 | $3,500 | 44% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $3,000 | $5,200 | $7,400 | 100% |
Where the Toledo price comes from
We price the labor side from BLS wage data for 3 trades: paving, surfacing and tamping equipment operators at 40%, construction laborers at 30%, operating engineers and other construction equipment operators at 30%. Weighted together, Toledo wages are 1.08 times the national level. Labor makes up about 44% of the midpoint estimate (41% at national prices).
Materials are scaled with BEA's regional price parity for goods. Toledo is at 93.6 against 100 for the US, so a materials line of $2,950 nationally becomes $2,800 here (midpoint, 600 sq ft). Permits follow the all-items index of 91.5: $45 to $180.
Who does the work: Toledo trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Toledo the blend is 1.08.
Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $27.92 an hour, 9% above the US median of $25.64. The middle half of them earn between $21.33 and $31.71 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $24.38 an hour, which is 8% above the national $22.66. The middle half of them earn between $21.59 and $33.94 an hour. BLS counts 1,520 of them working in the area, 52.1 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $30.95 an hour, 8% above the US median of $28.78. The middle half of them earn between $26.86 and $44.97 an hour. About 780 work in the metro. That is 26.8 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $130 to the midpoint estimate; the 25th percentile takes off about $220. That is a swing of roughly 4.2% to 2.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Toledo has 291,530 jobs in total (BLS, May 2025), ranking 87th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $21.33 | $27.92 | $31.71 | $25.64 | 1.09 | metro |
| Construction laborers (47-2061) | 30% | $21.59 | $24.38 | $33.94 | $22.66 | 1.08 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $26.86 | $30.95 | $44.97 | $28.78 | 1.08 | metro |
| Blended | 100% | 1.08 | |||||
The best months for asphalt driveway in Toledo
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Toledo Metcalf Fld (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Toledo are April through November: 8 of 12. Outside them, January, February, March and December have an average overnight low at or below freezing (32°F).
In January, February, March and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 118 days a year with a low at or below 32°F at this station.
Toledo gets about 32 inches of precipitation in a normal year. The wettest months are April, May and August (3.5 inches in May). Inside the workable window, October and November are the driest, at 2.4 and 2.3 inches. The station averages about 18 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 34 | 20 | 1.8 | Cold |
| Feb | 36 | 22 | 1.8 | Cold |
| Mar | 47 | 29 | 2.3 | Cold |
| Apr | 60 | 40 | 3.3 | Workable |
| May | 71 | 51 | 3.5 | Workable |
| Jun | 81 | 61 | 3.2 | Workable |
| Jul | 85 | 65 | 3.2 | Workable |
| Aug | 82 | 63 | 3.5 | Workable |
| Sep | 76 | 55 | 3.1 | Workable |
| Oct | 64 | 45 | 2.4 | Workable |
| Nov | 50 | 34 | 2.3 | Workable |
| Dec | 38 | 26 | 2.1 | Cold |
Optional extras in Toledo
Add-ons start from national price ranges and are scaled by 1.01 for Toledo, which is the average of the area's wage index (1.08) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $610 – $1,200 |
Toledo: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Toledo. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$3,000 to $4,750
New topcoat over a sound base, flat lot
Standard
$4,300 to $6,100
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,650 to $7,400
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,250 – $1,950 | $1,800 – $2,500 | $2,350 – $3,050 |
| 20x20 (400 sq ft) | $2,000 – $3,200 | $2,900 – $4,100 | $3,800 – $5,000 |
| 2-car (20x30), 600 sq ft | $3,000 – $4,750 | $4,300 – $6,100 | $5,650 – $7,400 |
| long rural (10x100), 1,000 sq ft | $4,950 – $7,850 | $7,150 – $10,000 | $9,300 – $12,200 |
How Toledo compares
Of the five closest metros, 2 are cheaper than Toledo. Lansing is the lowest at about $5,150 (midpoint, 600 sq ft), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Toledo, OHthis page | $3,000 – $7,400 | $5,200 | |
| Ann Arbor, MI50 miles | $2,950 – $7,300 | $5,150 | −1% |
| Detroit, MI85 miles | $3,100 – $7,650 | $5,400 | +4% |
| Fort Wayne, IN85 miles | $3,350 – $8,500 | $5,900 | +14% |
| Lansing, MI95 miles | $2,950 – $7,300 | $5,150 | −1% |
| Flint, MI100 miles | $3,050 – $7,600 | $5,350 | +3% |
| Ohio (statewide) | $3,050 – $7,550 | $5,300 | +2% |
| United States | $3,050 – $7,400 | $5,250 | +1% |
Out of the 300 metros we cover, Toledo ranks #137 for the cost of this job (#1 is the most expensive). Statewide, Toledo is 2% below the Ohio figure.
Elsewhere in Ohio
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $3,200 – $7,950 | $5,550 | +7% |
| Cincinnati, OH | 1,101,030 jobs | $3,050 – $7,600 | $5,350 | +3% |
| Cleveland, OH | 1,031,130 jobs | $3,100 – $7,700 | $5,400 | +4% |
| Dayton, OH | 372,660 jobs | $2,950 – $7,250 | $5,100 | −2% |
| Akron, OH | 319,560 jobs | $3,100 – $7,700 | $5,400 | +4% |
| Canton, OH | 163,080 jobs | $3,000 – $7,450 | $5,250 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Toledo against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| McAllen, TX | 296,700 jobs | $2,650 – $6,250 | $4,450 | −14% |
| Stockton, CA | 289,660 jobs | $3,550 – $8,850 | $6,200 | +19% |
| Syracuse, NY | 300,130 jobs | $3,100 – $7,600 | $5,350 | +3% |
| Portland, ME | 288,480 jobs | $3,050 – $7,500 | $5,250 | +1% |
Planning more than one job in Toledo?
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Toledo wage and price inputs. Compared with national midpoints, French drain comes out highest (+6%) and concrete slab lowest (−1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,750 – $9,550 | +3% |
| Gravel driveway | 1,000 sq ft | $2,500 – $10,200 | +1% |
| Paver patio | 300 sq ft | $3,100 – $5,650 | +3% |
| French drain | 60 linear ft | $640 – $2,250 | +6% |
| Concrete slab | 400 sq ft | $2,450 – $5,150 | −1% |
| Concrete patio | 300 sq ft | $1,250 – $4,050 | +1% |
Asphalt driveway: what moves the price in Toledo
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,300 to $6,100 for Toledo, OH is attached.
Detailed asphalt driveway report for Toledo, OH, $9
Multi-page report for Toledo, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Toledo: your questions
+How much does it cost to pave a driveway in Toledo?
For 600 sq ft, expect $3,000 to $7,400 in the Toledo area. A standard-spec job lands at $4,300 to $6,100. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Toledo?
About $4.95 to $12 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Toledo or Ann Arbor?
Ann Arbor is 50 miles away. The midpoint for 600 sq ft there is $5,150, which is 1% less than Toledo ($5,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Toledo?
About 44% at the midpoint, or $2,300 out of $5,200. Materials are 54% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Toledo?
$3,000 to $7,400. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Toledo?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Toledo area (our national range of $50 to $200 scaled by the local price level).
+Is Toledo expensive for asphalt driveway compared with the rest of Ohio?
Toledo is 2% below the Ohio statewide estimate ($5,300 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Toledo?
The BLS median is $27.92 an hour in the Toledo area, compared with $25.64 nationally. The 25th to 75th percentile range is $21.33 to $31.71.
+What do basic and premium asphalt driveway work cost in Toledo?
For 600 sq ft, basic work runs $3,000 to $4,750 and premium work $5,650 to $7,400. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Toledo?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Toledo?
$610 to $1,200 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Toledo
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.