Asphalt driveway cost in Stockton, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,550 – $8,850
- Per sq ft
- $5.80 – $14.50
- before permit
- Versus US midpoint
- +18%
- US $5,250
- Rank of 300 metros
- #25
- 1 = most expensive
If you want to pave a driveway in Stockton, plan on $3,550 to $8,850 for 600 sq ft, all in. Per sq ft, that is $5.80 to $14.50 for materials and labor, with the permit on top. The local midpoint runs 18% higher than the national one. Paving, surfacing and tamping equipment operators earn a median of $39.97 an hour in the Stockton area, 56% above the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Stockton, CA, standard level
$5,150 to $7,250
About $8.40 to $12 per sq ft before permits. Labor is about 47% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,700 | $3,550 |
| Labor | $2,300 | $3,550 |
| Permits and fees | $100 | $160 |
| Total | $5,150 | $7,250 |
Cost breakdown for 600 sq ft in Stockton, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $3,100 | $4,150 | 50% |
| Labor | $1,400 | $2,950 | $4,450 | 47% |
| Permits and fees | $55 | $130 | $210 | 2% |
| Total | $3,550 | $6,200 | $8,850 | 100% |
Where the Stockton price comes from
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $39.97 an hour. Add the other trades involved and the blended wage index for Stockton is 1.38 (US = 1.00), which puts labor at 47% of the total. BLS does not publish this trade for the metro, so we used the California statewide median.
On the materials line, the BEA goods price index for the Stockton metro is 105.2 (US = 100). The midpoint materials bill for 600 sq ft comes to $3,100, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (105.1) and land at $55 to $210.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Stockton. The wage table below marks each row.
Why two Stockton quotes can differ
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Climate in Stockton: timing your asphalt driveway job
We use NOAA's 1991-2020 climate normals for Stockton Fire Stn 4 (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Stockton (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Stockton gets about 17 inches of precipitation in a normal year. The wettest months are January, February and December (3.6 inches in January). Inside the workable window, May and October are the driest, at 0.6 and 1.0 inches. The station averages about 90 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 39 | 3.6 | Workable |
| Feb | 65 | 42 | 3.1 | Workable |
| Mar | 70 | 46 | 2.4 | Workable |
| Apr | 75 | 49 | 1.4 | Workable |
| May | 83 | 54 | 0.6 | Workable |
| Jun | 91 | 58 | 0.1 | Hot |
| Jul | 95 | 61 | 0.0 | Hot |
| Aug | 95 | 60 | 0.0 | Hot |
| Sep | 92 | 57 | 0.1 | Hot |
| Oct | 82 | 51 | 1.0 | Workable |
| Nov | 69 | 44 | 1.8 | Workable |
| Dec | 59 | 39 | 3.1 | Workable |
What nearby projects cost in Stockton
Because every project leans on different trades, Stockton's wage level does not move all prices equally. Against the US midpoint, French drain runs +19% and concrete slab +8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,950 – $10,100 | +9% |
| Gravel driveway | 1,000 sq ft | $2,900 – $11,700 | +15% |
| Paver patio | 300 sq ft | $3,400 – $6,200 | +14% |
| French drain | 60 linear ft | $710 – $2,500 | +19% |
| Concrete slab | 400 sq ft | $2,650 – $5,600 | +8% |
| Concrete patio | 300 sq ft | $1,350 – $4,350 | +8% |
Cost by quality level and size in Stockton
Three bands are cut from the same cited range and localized for Stockton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$3,550 to $5,650
New topcoat over a sound base, flat lot
Standard
$5,150 to $7,250
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$6,700 to $8,850
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,450 – $2,350 | $2,100 – $3,000 | $2,800 – $3,650 |
| 20x20 (400 sq ft) | $2,400 – $3,800 | $3,450 – $4,900 | $4,550 – $5,950 |
| 2-car (20x30), 600 sq ft | $3,550 – $5,650 | $5,150 – $7,250 | $6,700 – $8,850 |
| long rural (10x100), 1,000 sq ft | $5,850 – $9,350 | $8,500 – $12,000 | $11,100 – $14,600 |
Stockton against nearby metros and the rest of California
Of the five closest metros, 1 is cheaper than Stockton. Merced is the lowest at about $6,100 (midpoint, 600 sq ft), 60 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Stockton, CAthis page | $3,550 – $8,850 | $6,200 | |
| Modesto, CA30 miles | $3,650 – $9,100 | $6,350 | +3% |
| Vallejo, CA45 miles | $3,650 – $9,250 | $6,450 | +4% |
| San Francisco, CA55 miles | $4,100 – $10,600 | $7,350 | +19% |
| Merced, CA60 miles | $3,500 – $8,700 | $6,100 | −1% |
| Sacramento, CA60 miles | $3,650 – $9,150 | $6,400 | +3% |
| California (statewide) | $3,650 – $9,100 | $6,350 | +3% |
| United States | $3,050 – $7,400 | $5,250 | −16% |
Across 300 US metros, Stockton comes in at #25 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Stockton is 3% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $3,650 – $9,200 | $6,450 | +4% |
| San Francisco, CA | 2,373,920 jobs | $4,100 – $10,600 | $7,350 | +19% |
| Riverside, CA | 1,716,760 jobs | $3,800 – $9,800 | $6,800 | +10% |
| San Diego, CA | 1,538,060 jobs | $3,500 – $8,600 | $6,050 | −2% |
| San Jose, CA | 1,134,970 jobs | $3,850 – $9,850 | $6,850 | +11% |
| Sacramento, CA | 1,080,590 jobs | $3,650 – $9,150 | $6,400 | +3% |
Cities with a workforce like Stockton's
Big cities and small ones price differently, so here is Stockton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Toledo, OH | 291,530 jobs | $3,000 – $7,400 | $5,200 | −16% |
| Portland, ME | 288,480 jobs | $3,050 – $7,500 | $5,250 | −15% |
| McAllen, TX | 296,700 jobs | $2,650 – $6,250 | $4,450 | −28% |
| Lexington, KY | 286,910 jobs | $2,900 – $7,000 | $4,950 | −20% |
Add-ons priced for Stockton
Extras are quoted nationally and then scaled to Stockton by the average of the local wage index (1.38) and goods index (1.05), a factor of 1.21. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $730 – $1,450 |
Stockton labor market for asphalt driveway
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Stockton is 1.38 times the national level.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Stockton metro, so we used the California statewide median: $39.97 an hour against $25.64 for the US. The middle half of them earn between $30.90 and $60.89 an hour.
Construction laborers (47-2061), 30% of the weighting: a median of $27.62 an hour, 22% above the US median of $22.66. The middle half of them earn between $22.65 and $37.23 an hour. About 1,470 work in the metro. That is 50.7 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $37.22 an hour, which is 29% above the national $28.78. The middle half of them earn between $29.54 and $57.72 an hour. BLS counts 760 of them working in the area, 26.2 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($60.89 an hour) instead of the median, the labor line grows by about $700. At the 25th percentile ($30.90) it shrinks by about $300. The total moves by 11.2% or 4.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 289,660 jobs in the Stockton-Lodi area. That makes it the 88th largest of the 300 metros we cover, with 0.19% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $30.90 | $39.97 | $60.89 | $25.64 | 1.56 | state |
| Construction laborers (47-2061) | 30% | $22.65 | $27.62 | $37.23 | $22.66 | 1.22 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $29.54 | $37.22 | $57.72 | $28.78 | 1.29 | metro |
| Blended | 100% | 1.38 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,150 to $7,250 for Stockton, CA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Stockton, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Stockton: your questions
+How much does it cost to pave a driveway in Stockton?
For 600 sq ft, expect $3,550 to $8,850 in the Stockton area. A standard-spec job lands at $5,150 to $7,250. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Stockton?
About $5.80 to $14.50 per sq ft for materials and labor, plus $55 to $210 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Stockton or Modesto?
Modesto is 30 miles away. The midpoint for 600 sq ft there is $6,350, which is 3% more than Stockton ($6,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Stockton?
About 47% at the midpoint, or $2,950 out of $6,200. Materials are 50% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Stockton?
$3,550 to $8,850. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Stockton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $55 to $210 for fees in the Stockton area (our national range of $50 to $200 scaled by the local price level).
+Is Stockton expensive for asphalt driveway compared with the rest of California?
Stockton is 3% below the California statewide estimate ($6,350 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Stockton?
BLS has no published metro figure here, so we use the statewide median of $39.97 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $30.90 to $60.89.
+What do basic and premium asphalt driveway work cost in Stockton?
For 600 sq ft, basic work runs $3,550 to $5,650 and premium work $6,700 to $8,850. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Stockton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Stockton?
$730 to $1,450 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Stockton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.