Asphalt driveway cost in San Jose, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,850 – $9,850
- Per sq ft
- $6.35 – $16
- before permit
- Versus US midpoint
- +31%
- US $5,250
- Rank of 300 metros
- #4
- 1 = most expensive
Local price for an asphalt driveway in the San Jose area: $3,850 to $9,850 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 31% higher than the US figure. Paving, surfacing and tamping equipment operators earn a median of $39.97 an hour in the San Jose area, 56% above the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in San Jose, CA, standard level
$5,650 to $8,050
About $9.25 to $13 per sq ft before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,700 | $3,550 |
| Labor | $2,850 | $4,350 |
| Permits and fees | $100 | $170 |
| Total | $5,650 | $8,050 |
Cost breakdown for 600 sq ft in San Jose, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $3,100 | $4,150 | 46% |
| Labor | $1,700 | $3,600 | $5,450 | 52% |
| Permits and fees | $55 | $140 | $220 | 2% |
| Total | $3,850 | $6,850 | $9,850 | 100% |
Why San Jose prices look the way they do
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $39.97 an hour. Add the other trades involved and the blended wage index for San Jose is 1.68 (US = 1.00), which puts labor at 52% of the total. BLS does not publish this trade for the metro, so we used the California statewide median.
Materials are scaled with BEA's regional price parity for goods. San Jose is at 105.2 against 100 for the US, so a materials line of $2,950 nationally becomes $3,100 here (midpoint, 600 sq ft). Permits follow the all-items index of 110.4: $55 to $220.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in San Jose. The wage table below marks each row.
San Jose: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to San Jose. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$3,850 to $6,250
New topcoat over a sound base, flat lot
Standard
$5,650 to $8,050
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$7,450 to $9,850
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,550 – $2,550 | $2,300 – $3,300 | $3,050 – $4,050 |
| 20x20 (400 sq ft) | $2,600 – $4,200 | $3,800 – $5,400 | $5,000 – $6,650 |
| 2-car (20x30), 600 sq ft | $3,850 – $6,250 | $5,650 – $8,050 | $7,450 – $9,850 |
| long rural (10x100), 1,000 sq ft | $6,400 – $10,300 | $9,350 – $13,300 | $12,300 – $16,200 |
How San Jose compares
Same job, same size (600 sq ft), priced for the nearest metros. San Jose is the priciest of the group. Merced is the cheapest at $6,100.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| San Jose, CAthis page | $3,850 – $9,850 | $6,850 | |
| Santa Cruz, CA35 miles | $3,550 – $8,850 | $6,200 | −10% |
| Merced, CA40 miles | $3,500 – $8,700 | $6,100 | −11% |
| Salinas, CA45 miles | $3,600 – $9,000 | $6,300 | −8% |
| Modesto, CA50 miles | $3,650 – $9,100 | $6,350 | −7% |
| Stockton, CA70 miles | $3,550 – $8,850 | $6,200 | −10% |
| California (statewide) | $3,650 – $9,100 | $6,350 | −7% |
| United States | $3,050 – $7,400 | $5,250 | −24% |
Out of the 300 metros we cover, San Jose ranks #4 for the cost of this job (#1 is the most expensive). Statewide, San Jose is 8% above the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $3,650 – $9,200 | $6,450 | −6% |
| San Francisco, CA | 2,373,920 jobs | $4,100 – $10,600 | $7,350 | +7% |
| Riverside, CA | 1,716,760 jobs | $3,800 – $9,800 | $6,800 | level |
| San Diego, CA | 1,538,060 jobs | $3,500 – $8,600 | $6,050 | −12% |
| Sacramento, CA | 1,080,590 jobs | $3,650 – $9,150 | $6,400 | −7% |
| Fresno, CA | 476,890 jobs | $3,550 – $8,800 | $6,150 | −10% |
Metros of a similar size
Big cities and small ones price differently, so here is San Jose against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Las Vegas, NV | 1,136,960 jobs | $3,000 – $7,300 | $5,150 | −25% |
| San Antonio, TX | 1,126,880 jobs | $2,750 – $6,650 | $4,700 | −31% |
| Portland, OR | 1,208,410 jobs | $3,450 – $8,500 | $5,950 | −13% |
| Pittsburgh, PA | 1,114,490 jobs | $3,050 – $7,450 | $5,250 | −23% |
Asphalt driveway: what moves the price in San Jose
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Who does the work: San Jose trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For San Jose the blend is 1.68.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the San Jose metro, so we used the California statewide median: $39.97 an hour against $25.64 for the US. The middle half of them earn between $30.90 and $60.89 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $32.92 an hour, which is 45% above the national $22.66. The middle half of them earn between $27.33 and $38.90 an hour. BLS counts 4,420 of them working in the area, 38.9 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $59.78 an hour, 108% above the US median of $28.78. The middle half of them earn between $38.21 and $62.57 an hour. About 1,360 work in the metro. That is 12.0 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $700 to the midpoint estimate; the 25th percentile takes off about $300. That is a swing of roughly 4.4% to 10.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
San Jose-Sunnyvale-Santa Clara has 1,134,970 jobs in total (BLS, May 2025), ranking 27th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $30.90 | $39.97 | $60.89 | $25.64 | 1.56 | state |
| Construction laborers (47-2061) | 30% | $27.33 | $32.92 | $38.90 | $22.66 | 1.45 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $38.21 | $59.78 | $62.57 | $28.78 | 2.08 | metro |
| Blended | 100% | 1.68 | |||||
Optional extras in San Jose
Add-ons start from national price ranges and are scaled by 1.37 for San Jose, which is the average of the area's wage index (1.68) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $820 – $1,650 |
Planning more than one job in San Jose?
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same San Jose wage and price inputs. Compared with national midpoints, gravel driveway comes out highest (+41%) and concrete slab lowest (+22%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $4,700 – $12,200 | +32% |
| Gravel driveway | 1,000 sq ft | $3,550 – $14,300 | +41% |
| Paver patio | 300 sq ft | $3,650 – $6,700 | +23% |
| French drain | 60 linear ft | $820 – $2,850 | +37% |
| Concrete slab | 400 sq ft | $3,050 – $6,250 | +22% |
| Concrete patio | 300 sq ft | $1,500 – $5,100 | +26% |
The best months for asphalt driveway in San Jose
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, San Jose (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for digging, grading and setting material in the ground in San Jose: no month in the averages is cold enough (an average overnight low at or below freezing (32°F)) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
San Jose gets about 13 inches of precipitation in a normal year. The wettest months are January, February and December (2.8 inches in January). The station averages about 16 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 60 | 42 | 2.8 | Workable |
| Feb | 62 | 44 | 2.7 | Workable |
| Mar | 66 | 46 | 2.1 | Workable |
| Apr | 69 | 48 | 1.1 | Workable |
| May | 74 | 52 | 0.4 | Workable |
| Jun | 79 | 56 | 0.2 | Workable |
| Jul | 81 | 58 | 0.0 | Workable |
| Aug | 81 | 59 | 0.1 | Workable |
| Sep | 81 | 57 | 0.1 | Workable |
| Oct | 76 | 53 | 0.5 | Workable |
| Nov | 66 | 46 | 1.3 | Workable |
| Dec | 60 | 42 | 2.3 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $8,050 for San Jose, CA is attached.
Take this estimate with you: PDF report, $9
The report lays out the asphalt driveway numbers for San Jose, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in San Jose: your questions
+How much does it cost to pave a driveway in San Jose?
For 600 sq ft, expect $3,850 to $9,850 in the San Jose area. A standard-spec job lands at $5,650 to $8,050. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in San Jose?
About $6.35 to $16 per sq ft for materials and labor, plus $55 to $220 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in San Jose or Santa Cruz?
Santa Cruz is 35 miles away. The midpoint for 600 sq ft there is $6,200, which is 10% less than San Jose ($6,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in San Jose?
About 52% at the midpoint, or $3,600 out of $6,850. Materials are 46% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in San Jose?
$3,850 to $9,850. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in San Jose?
Often, but rules are set by your city or county building office, so call before you hire. Budget $55 to $220 for fees in the San Jose area (our national range of $50 to $200 scaled by the local price level).
+Is San Jose expensive for asphalt driveway compared with the rest of California?
San Jose is 8% above the California statewide estimate ($6,350 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in San Jose?
BLS has no published metro figure here, so we use the statewide median of $39.97 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $30.90 to $60.89.
+What do basic and premium asphalt driveway work cost in San Jose?
For 600 sq ft, basic work runs $3,850 to $6,250 and premium work $7,450 to $9,850. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+Is there a bad season to pave a driveway in San Jose?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add a sealcoat" add in San Jose?
$820 to $1,650 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near San Jose
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.