Asphalt driveway cost in Syracuse, NY
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $3,100 – $7,600
- Per sq ft
- $5.10 – $12.50
- before permit
- Versus US midpoint
- +3%
- US $5,250
- Rank of 300 metros
- #101
- 1 = most expensive
Local price for an asphalt driveway in the Syracuse area: $3,100 to $7,600 for 600 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Paving, surfacing and tamping equipment operators earn a median of $28.05 an hour in the Syracuse area, 9% above the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Syracuse, NY, standard level
$4,450 to $6,250
About $7.30 to $10 per sq ft before permits. Labor is about 43% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,550 | $3,350 |
| Labor | $1,800 | $2,750 |
| Permits and fees | $90 | $150 |
| Total | $4,450 | $6,250 |
Cost breakdown for 600 sq ft in Syracuse, NY
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $2,950 | $3,950 | 55% |
| Labor | $1,100 | $2,300 | $3,450 | 43% |
| Permits and fees | $50 | $120 | $190 | 2% |
| Total | $3,100 | $5,350 | $7,600 | 100% |
What is behind the Syracuse number
Labor is 43% of the midpoint bill here, against 41% nationally. The mix of trades behind this job is paving, surfacing and tamping equipment operators (40%), construction laborers (30%), operating engineers and other construction equipment operators (30%). We weight each trade's local median wage by that share and compare it with the national median. In Syracuse the blended ratio comes out at 1.07.
Materials are scaled with BEA's regional price parity for goods. Syracuse is at 99.7 against 100 for the US, so a materials line of $2,950 nationally becomes $2,950 here (midpoint, 600 sq ft). Permits follow the all-items index of 95.7: $50 to $190.
Is Syracuse cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $5,250 to $5,650 across Syracuse and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Syracuse, NYthis page | $3,100 – $7,600 | $5,350 | |
| Utica, NY55 miles | $3,150 – $7,650 | $5,400 | +1% |
| Binghamton, NY60 miles | $3,050 – $7,450 | $5,250 | −2% |
| Rochester, NY70 miles | $3,100 – $7,600 | $5,350 | level |
| Albany, NY115 miles | $3,250 – $8,050 | $5,650 | +5% |
| Scranton, PA115 miles | $3,100 – $7,500 | $5,300 | −1% |
| New York (statewide) | $3,450 – $8,450 | $5,950 | +11% |
| United States | $3,050 – $7,400 | $5,250 | −3% |
Out of the 300 metros we cover, Syracuse ranks #101 for the cost of this job (#1 is the most expensive). Statewide, Syracuse is 10% below the New York figure.
Elsewhere in New York
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York, NY | 9,492,000 jobs | $3,600 – $8,900 | $6,250 | +17% |
| Buffalo, NY | 534,550 jobs | $3,150 – $7,800 | $5,500 | +2% |
| Rochester, NY | 494,280 jobs | $3,100 – $7,600 | $5,350 | level |
| Albany, NY | 449,410 jobs | $3,250 – $8,050 | $5,650 | +5% |
| Poughkeepsie, NY | 268,970 jobs | $3,400 – $8,250 | $5,850 | +9% |
| Utica, NY | 118,390 jobs | $3,150 – $7,650 | $5,400 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Syracuse against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Provo, UT | 304,660 jobs | $2,900 – $7,050 | $5,000 | −7% |
| McAllen, TX | 296,700 jobs | $2,650 – $6,250 | $4,450 | −17% |
| Cape Coral, FL | 304,790 jobs | $2,850 – $6,850 | $4,850 | −9% |
| Toledo, OH | 291,530 jobs | $3,000 – $7,400 | $5,200 | −3% |
The best months for asphalt driveway in Syracuse
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Syracuse Hancock Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Syracuse are April through November: 8 of 12. Outside them, January, February, March and December have an average overnight low at or below freezing (32°F).
In January, February, March and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 132 days a year with a low at or below 32°F at this station.
Syracuse gets about 40 inches of precipitation in a normal year, including roughly 128 inches of snow. The wettest months are July, August and October (3.9 inches in October). Inside the workable window, September and November are the driest, at 3.4 and 3.2 inches. The station averages about 10 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 32 | 17 | 2.6 | Cold |
| Feb | 34 | 18 | 2.5 | Cold |
| Mar | 42 | 25 | 3.0 | Cold |
| Apr | 56 | 36 | 3.5 | Workable |
| May | 69 | 47 | 3.4 | Workable |
| Jun | 77 | 57 | 3.6 | Workable |
| Jul | 82 | 62 | 3.9 | Workable |
| Aug | 80 | 60 | 3.7 | Workable |
| Sep | 73 | 53 | 3.4 | Workable |
| Oct | 60 | 42 | 3.9 | Workable |
| Nov | 48 | 33 | 3.2 | Workable |
| Dec | 37 | 24 | 3.3 | Cold |
Who does the work: Syracuse trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Syracuse the blend is 1.07.
Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $28.05 an hour, 9% above the US median of $25.64. The middle half of them earn between $23.76 and $35.65 an hour. About 100 work in the metro. That is 3.3 per 10,000 jobs, compared with 2.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $23.64 an hour, which is 4% above the national $22.66. The middle half of them earn between $21.52 and $34.90 an hour. BLS counts 1,660 of them working in the area, 55.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $30.68 an hour, 7% above the US median of $28.78. The middle half of them earn between $26.67 and $50.65 an hour. About 700 work in the metro. That is 23.3 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $250 to the midpoint estimate; the 25th percentile takes off about $140. That is a swing of roughly 2.7% to 4.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Syracuse has 300,130 jobs in total (BLS, May 2025), ranking 85th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $23.76 | $28.05 | $35.65 | $25.64 | 1.09 | metro |
| Construction laborers (47-2061) | 30% | $21.52 | $23.64 | $34.90 | $22.66 | 1.04 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $26.67 | $30.68 | $50.65 | $28.78 | 1.07 | metro |
| Blended | 100% | 1.07 | |||||
Planning more than one job in Syracuse?
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Syracuse wage and price inputs. Compared with national midpoints, French drain comes out highest (+7%) and concrete slab lowest (+2%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,800 – $9,600 | +4% |
| Gravel driveway | 1,000 sq ft | $2,550 – $10,400 | +2% |
| Paver patio | 300 sq ft | $3,150 – $5,700 | +5% |
| French drain | 60 linear ft | $640 – $2,250 | +7% |
| Concrete slab | 400 sq ft | $2,500 – $5,300 | +2% |
| Concrete patio | 300 sq ft | $1,250 – $4,100 | +3% |
Asphalt driveway: what moves the price in Syracuse
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Cost by quality level and size in Syracuse
The cited range is split into basic, standard and premium bands, then scaled to Syracuse. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$3,100 to $4,900
New topcoat over a sound base, flat lot
Standard
$4,450 to $6,250
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,800 to $7,600
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,250 – $2,050 | $1,850 – $2,600 | $2,400 – $3,150 |
| 20x20 (400 sq ft) | $2,100 – $3,300 | $3,000 – $4,200 | $3,900 – $5,150 |
| 2-car (20x30), 600 sq ft | $3,100 – $4,900 | $4,450 – $6,250 | $5,800 – $7,600 |
| long rural (10x100), 1,000 sq ft | $5,150 – $8,100 | $7,400 – $10,300 | $9,600 – $12,600 |
Add-ons priced for Syracuse
Add-ons start from national price ranges and are scaled by 1.03 for Syracuse, which is the average of the area's wage index (1.07) and goods price index (1.00). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $620 – $1,250 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,450 to $6,250 for Syracuse, NY is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Syracuse, NY: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Syracuse: your questions
+How much does it cost to pave a driveway in Syracuse?
For 600 sq ft, expect $3,100 to $7,600 in the Syracuse area. A standard-spec job lands at $4,450 to $6,250. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Syracuse?
About $5.10 to $12.50 per sq ft for materials and labor, plus $50 to $190 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Syracuse or Utica?
Utica is 55 miles away. The midpoint for 600 sq ft there is $5,400, which is 1% more than Syracuse ($5,350). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Syracuse?
About 43% at the midpoint, or $2,300 out of $5,350. Materials are 55% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Syracuse?
$3,100 to $7,600. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Syracuse?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $190 for fees in the Syracuse area (our national range of $50 to $200 scaled by the local price level).
+Is Syracuse expensive for asphalt driveway compared with the rest of New York?
Syracuse is 10% below the New York statewide estimate ($5,950 at the midpoint). We cover 9 metros in New York; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Syracuse?
The BLS median is $28.05 an hour in the Syracuse area, compared with $25.64 nationally. The 25th to 75th percentile range is $23.76 to $35.65.
+What do basic and premium asphalt driveway work cost in Syracuse?
For 600 sq ft, basic work runs $3,100 to $4,900 and premium work $5,800 to $7,600. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Syracuse?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Syracuse?
$620 to $1,250 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Syracuse
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.