Skip to content
CostLocal

Asphalt driveway cost in Ohio

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$3,050 – $7,550
Per sq ft
$5 – $12.50
before permit
Versus US midpoint
+2%
US $5,250
Metros covered
8

Across Ohio, an asphalt driveway costs about $3,050 to $7,550 for 600 sq ft. Statewide, that midpoint is 2% above the US figure of $5,250. Paving, surfacing and tamping equipment operators earn a median $28.98 an hour in Ohio (US: $25.64).

Inside Ohio, the metros we cover range from $5,100 (Dayton) to $5,550 (Columbus) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your asphalt driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full new driveway: base, 2-3 in of hot mix, edging

Add-ons

Estimated cost for 600 sq ft in Ohio (statewide), standard level

$4,400 to $6,200

About $7.20 to $10 per sq ft before permits. Labor is about 45% of the bill.

Cost breakdown
PartLowHigh
Materials$2,400$3,150
Labor$1,900$2,900
Permits and fees$90$140
Total$4,400$6,200
Save and get a PDF report

Cost breakdown for 600 sq ft in Ohio

Part of the jobLowMidpointHighShare
Materials$1,850$2,800$3,70052%
Labor$1,150$2,400$3,70045%
Permits and fees$45$120$1902%
Total$3,050$5,300$7,550100%

Wages behind the Ohio number

Ohio's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.13 times the national level.

Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $28.98 an hour, 13% above the US median of $25.64. The middle half of them earn between $22.83 and $38.27 an hour. About 2,370 work in the state. That is 4.3 per 10,000 jobs, compared with 2.7 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $26.96 an hour, which is 19% above the national $22.66. The middle half of them earn between $22.09 and $35.76 an hour. BLS counts 31,910 of them working in the state, 57.5 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $31.22 an hour, 8% above the US median of $28.78. The middle half of them earn between $26.17 and $44.68 an hour. About 16,920 work in the state. That is 30.5 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($38.27 an hour) would add about $310 to the statewide midpoint; one at the 25th percentile ($22.83) would take off about $200. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 5,550,180 jobs across Ohio (May 2025), which is 3.6% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Paving, surfacing and tamping equipment operators (47-2071)40%$22.83$28.98$38.27$25.641.13state
Construction laborers (47-2061)30%$22.09$26.96$35.76$22.661.19state
Operating engineers and other construction equipment operators (47-2073)30%$26.17$31.22$44.68$28.781.08state
Blended100%1.13

Ohio metro-by-metro prices

4 of the 8 metros sit above the statewide midpoint of $5,300, and the top-to-bottom gap is 9%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
Columbus, OH$3,200 – $7,950$5,550+5%
Cleveland, OH$3,100 – $7,700$5,400+2%
Akron, OH$3,100 – $7,700$5,400+2%
Youngstown, OH$3,100 – $7,650$5,400+1%
Cincinnati, OH$3,050 – $7,600$5,350level
Canton, OH$3,000 – $7,450$5,250−2%
Toledo, OH$3,000 – $7,400$5,200−2%
Dayton, OH$2,950 – $7,250$5,100−4%

Ohio seasons and asphalt driveway

Weather decides when digging and ground work can happen, and Ohio is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Cincinnati has the longest comfortable season of the metros we cover in Ohio at 9 months (March through November); Youngstown has the shortest at 8 (April through November). Rainfall runs from 32 inches a year in Toledo to 43 inches in Cincinnati.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Columbus2285428: April through November
Cincinnati2487439: March through November
Cleveland2481338: April through November
Dayton2087428: April through November
Akron2185338: April through November
Toledo2085328: April through November
Canton2084428: April through November
Youngstown1983418: April through November

How Ohio compares with nearby states

Ohio ranks 20 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. Ohio sits at $5,300. The five states closest by workforce center are listed below.

States near Ohio, same project and size
StateDistanceRangeMidpointvs. here
West Virginia130 miles away$2,900 – $6,950$4,900−7%
Michigan180 miles away$3,000 – $7,350$5,200−3%
Indiana180 miles away$3,050 – $7,500$5,300−1%
Kentucky210 miles away$2,900 – $6,950$4,950−7%
Illinois280 miles away$3,550 – $8,950$6,250+17%

Why two Ohio quotes can differ

  • New versus overlay

    Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

  • Base work

    Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

  • Small jobs cost more per foot

    Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.

  • Hot-mix price

    Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).

  • Sealcoating

    Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.

Other Ohio jobs that often go with asphalt driveway

Each project weights the trades differently, so Ohio's wage level does not push every price by the same amount. Compared with the US midpoint, French drain is +8% and concrete slab +1%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,800 – $9,800+6%
Gravel driveway1,000 sq ft$2,600 – $10,600+4%
Paver patio300 sq ft$3,150 – $5,750+5%
French drain60 linear ft$650 – $2,250+8%
Concrete slab400 sq ft$2,500 – $5,250+1%
Concrete patio300 sq ft$1,250 – $4,150+3%

Basic, standard or premium: Ohio prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.

Basic

$3,050 to $4,850

New topcoat over a sound base, flat lot

Standard

$4,400 to $6,200

Full new driveway: base, 2-3 in of hot mix, edging

Premium

$5,750 to $7,550

Full tear-out and rebuild, drainage work, heavy-duty depth

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,250 – $2,000$1,800 – $2,550$2,400 – $3,150
20x20 (400 sq ft)$2,050 – $3,300$2,950 – $4,200$3,900 – $5,100
2-car (20x30), 600 sq ft$3,050 – $4,850$4,400 – $6,200$5,750 – $7,550
long rural (10x100), 1,000 sq ft$5,050 – $8,050$7,300 – $10,300$9,500 – $12,500

Add-ons priced for Ohio

Add-ons start from national price ranges and are scaled by 1.04 for Ohio, which is the average of the area's wage index (1.13) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add a sealcoat$620 – $1,250

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,400 to $6,200 for Ohio is attached.

Detailed asphalt driveway report for Ohio, $9

The report lays out the asphalt driveway numbers for Ohio line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Asphalt driveway in Ohio: your questions

+How much does it cost to pave a driveway in Ohio?

$3,050 to $7,550 for 600 sq ft, using statewide wages and prices. Metro areas inside Ohio can sit above or below that.

+Which city in Ohio is cheapest for asphalt driveway?

Dayton at about $5,100 (midpoint, 600 sq ft). The priciest is Columbus at $5,550.

+Is asphalt driveway cheaper in Ohio than the US average?

It is 2% more expensive: $5,300 against $5,250 for 600 sq ft at the midpoint.

+What share of the price is labor in Ohio?

About 45% ($2,400). Materials are 52%. Statewide labor for this job is weighted 1.13x the national wage level.

+What do paving, surfacing and tamping equipment operators earn in Ohio?

The BLS statewide median is $28.98 an hour, against $25.64 for the US. The 25th to 75th percentile range is $22.83 to $38.27.

+Where does Ohio rank for asphalt driveway costs?

20th most expensive of 51 (the 50 states plus DC) at the midpoint, $5,300 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium asphalt driveway work cost in Ohio?

For 600 sq ft, basic work runs $3,050 to $4,850 and premium work $5,750 to $7,550. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.

+Does the season matter for asphalt driveway in Ohio?

Yes where winters or summers are hard. Of the Ohio metros we cover, Cincinnati has the most comfortable months (9 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add a sealcoat" add in Ohio?

$620 to $1,250 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Asphalt driveway by city in Ohio

Asphalt driveway: all pricesOhio cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.