Asphalt driveway cost in Cincinnati, OH

Cincinnati: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Cincinnati wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Climate in Cincinnati: timing your asphalt driveway job

We use NOAA's 1991-2020 climate normals for Cincinnati Lunken Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through November is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Cincinnati (9 of 12 months). January, February and December have an average overnight low at or below freezing (32°F).

In January, February and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 102 days a year with a low at or below 32°F at this station.

Cincinnati gets about 43 inches of precipitation in a normal year. The wettest months are May, June and July (4.7 inches in May). Inside the workable window, October and November are the driest, at 3.0 and 2.9 inches. The station averages about 27 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Is Cincinnati cheap or dear? The local comparison

Of the five closest metros, 4 are cheaper than Cincinnati. Lexington is the lowest at about $4,950 (midpoint, 600 sq ft), 65 miles away.

Across 300 US metros, Cincinnati comes in at #109 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Cincinnati is 0% above the Ohio figure.

Other Ohio metros

Cities with a workforce like Cincinnati's

Big cities and small ones price differently, so here is Cincinnati against the 4 metros with the closest total employment.

Why two Cincinnati quotes can differ

• New versus overlay

  Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

• Base work

  Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

• Small jobs cost more per foot

  Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.

Optional extras in Cincinnati

Extras are quoted nationally and then scaled to Cincinnati by the average of the local wage index (1.14) and goods index (0.94), a factor of 1.04. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Cincinnati labor market for asphalt driveway

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Cincinnati is 1.14 times the national level.

For paving, surfacing and tamping equipment operators (47-2071, weighted 40%) the local median is $29.18 an hour, which is 14% above the national $25.64. The middle half of them earn between $23.42 and $45.39 an hour. BLS counts 480 of them working in the area, 4.4 for every 10,000 jobs (US: 2.7), so the local bench is deeper than average.

Construction laborers (47-2061), 30% of the weighting: a median of $26.41 an hour, 17% above the US median of $22.66. The middle half of them earn between $22.17 and $35.56 an hour. About 5,700 work in the metro. That is 51.8 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $32.19 an hour, which is 12% above the national $28.78. The middle half of them earn between $26.86 and $45.51 an hour. BLS counts 3,120 of them working in the area, 28.3 for every 10,000 jobs (US: 30.7), so the local bench is about average.

Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($45.39 an hour) instead of the median, the labor line grows by about $540. At the 25th percentile ($23.42) it shrinks by about $190. The total moves by 10.1% or 3.6%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 1,101,030 jobs in the Cincinnati area. That makes it the 32nd largest of the 300 metros we cover, with 0.71% of US employment.

Planning more than one job in Cincinnati?

Because every project leans on different trades, Cincinnati's wage level does not move all prices equally. Against the US midpoint, French drain runs +8% and concrete slab +1%.