Vinyl fence cost in Killeen, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,150 – $8,250
- Per linear ft
- $27.50 – $54
- before permit
- Versus US midpoint
- −9%
- US $6,850
- Rank of 300 metros
- #280
- 1 = most expensive
Killeen homeowners pay roughly $4,150 to $8,250 to install a vinyl fence at 150 linear ft, or $27.50 to $54 per linear ft (permit not included). Against the US midpoint, Killeen is 9% lower. Building materials run about 6% below the US average here (BEA goods price index 93.8).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Killeen, TX, standard level
$5,400 to $7,000
About $35.50 to $46 per linear ft before permits. Labor is about 19% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $950 | $1,450 |
| Permits and fees | $65 | $110 |
| Total | $5,400 | $7,000 |
Cost breakdown for 150 linear ft in Killeen, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,350 | 79% |
| Labor | $590 | $1,200 | $1,800 | 19% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,150 | $6,200 | $8,250 | 100% |
What is behind the Killeen number
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Killeen wages are 0.79 times the national level. Labor makes up about 19% of the midpoint estimate (22% at national prices).
On the materials line, the BEA goods price index for the Killeen metro is 93.8 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (91.1) and land at $35 to $140.
When to schedule vinyl fence in Killeen
We use NOAA's 1991-2020 climate normals for Killeen (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where exterior installation runs into the fewest weather problems in Killeen (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Killeen gets about 35 inches of precipitation in a normal year. The wettest months are May, September and October (4.7 inches in May). Inside the workable window, February and April are the driest, at 2.2 and 2.1 inches. The station averages about 105 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 60 | 36 | 2.5 | Workable |
| Feb | 63 | 40 | 2.2 | Workable |
| Mar | 70 | 47 | 3.3 | Workable |
| Apr | 77 | 54 | 2.1 | Workable |
| May | 84 | 63 | 4.7 | Workable |
| Jun | 92 | 70 | 3.2 | Hot |
| Jul | 96 | 72 | 2.7 | Hot |
| Aug | 97 | 73 | 1.6 | Hot |
| Sep | 90 | 67 | 3.9 | Hot |
| Oct | 80 | 56 | 3.4 | Workable |
| Nov | 69 | 46 | 2.7 | Workable |
| Dec | 60 | 38 | 2.4 | Workable |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Killeen is 0.79 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $22.87 an hour, which is 21% below the national $29.12. The middle half of them earn between $21.30 and $28.43 an hour. BLS counts 270 of them working in the area, 17.9 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $18.12 an hour, 20% below the US median of $22.66. The middle half of them earn between $17.28 and $22.05 an hour. About 940 work in the metro. That is 62.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.43 an hour) instead of the median, the labor line grows by about $140. At the 25th percentile ($21.30) it shrinks by about $40. The total moves by 2.3% or 0.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 150,580 jobs in the Killeen-Temple area. That makes it the 155th largest of the 300 metros we cover, with 0.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.30 | $22.87 | $28.43 | $29.12 | 0.79 | metro |
| Construction laborers (47-2061) | 50% | $17.28 | $18.12 | $22.05 | $22.66 | 0.80 | metro |
| Blended | 100% | 0.79 | |||||
Why two Killeen quotes can differ
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Extras that change the Killeen total
Extras are quoted nationally and then scaled to Killeen by the average of the local wage index (0.79) and goods index (0.94), a factor of 0.87. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $130 – $670 |
| Remove old fence | $1,300 – $2,600 |
What nearby projects cost in Killeen
Because every project leans on different trades, Killeen's wage level does not move all prices equally. Against the US midpoint, aluminum fence runs −11% and chain-link fence −15%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,650 – $6,750 | −12% |
| Chain-link fence | 150 linear ft | $1,350 – $5,200 | −15% |
| Aluminum fence | 150 linear ft | $3,350 – $10,200 | −11% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
Killeen against nearby metros and the rest of Texas
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,200 to $6,800 across Killeen and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Killeen, TXthis page | $4,150 – $8,250 | $6,200 | |
| Waco, TX40 miles | $4,150 – $8,250 | $6,200 | level |
| Austin, TX65 miles | $4,200 – $8,450 | $6,350 | +2% |
| College Station, TX85 miles | $4,150 – $8,250 | $6,200 | level |
| Dallas, TX125 miles | $4,550 – $9,050 | $6,800 | +10% |
| San Antonio, TX130 miles | $4,150 – $8,300 | $6,250 | +1% |
| Texas (statewide) | $4,350 – $8,650 | $6,500 | +5% |
| United States | $4,550 – $9,150 | $6,850 | +10% |
Across 300 US metros, Killeen comes in at #280 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Killeen is 5% below the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $4,550 – $9,050 | $6,800 | +10% |
| Houston, TX | 3,289,720 jobs | $4,450 – $8,850 | $6,650 | +7% |
| Austin, TX | 1,293,690 jobs | $4,200 – $8,450 | $6,350 | +2% |
| San Antonio, TX | 1,126,880 jobs | $4,150 – $8,300 | $6,250 | +1% |
| El Paso, TX | 339,120 jobs | $4,100 – $8,100 | $6,100 | −2% |
| McAllen, TX | 296,700 jobs | $4,100 – $8,050 | $6,050 | −2% |
Cities with a workforce like Killeen's
Big cities and small ones price differently, so here is Killeen against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Gainesville, FL | 152,670 jobs | $4,300 – $8,550 | $6,400 | +3% |
| Fargo, ND | 148,660 jobs | $4,400 – $8,850 | $6,600 | +7% |
| Roanoke, VA | 153,980 jobs | $4,250 – $8,450 | $6,350 | +3% |
| Myrtle Beach, SC | 146,260 jobs | $4,250 – $8,450 | $6,350 | +2% |
Cost by quality level and size in Killeen
Three bands are cut from the same cited range and localized for Killeen wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,150 to $5,800
4-ft picket or ranch rail
Standard
$5,400 to $7,000
6-ft privacy fence, standard white
Premium
$6,600 to $8,250
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,800 – $3,900 | $3,600 – $4,700 | $4,450 – $5,550 |
| 150 ft (150 linear ft) | $4,150 – $5,800 | $5,400 – $7,000 | $6,600 – $8,250 |
| 200 ft (200 linear ft) | $5,500 – $7,700 | $7,150 – $9,300 | $8,800 – $11,000 |
| full lot (300 linear ft) | $8,250 – $11,500 | $10,700 – $13,900 | $13,100 – $16,400 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,400 to $7,000 for Killeen, TX is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Killeen, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Killeen: your questions
+How much does it cost to install a vinyl fence in Killeen?
For 150 linear ft, expect $4,150 to $8,250 in the Killeen area. A standard-spec job lands at $5,400 to $7,000. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Killeen?
About $27.50 to $54 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Killeen or Waco?
Waco is 40 miles away. The midpoint for 150 linear ft there is $6,200, which is 0% less than Killeen ($6,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Killeen?
About 19% at the midpoint, or $1,200 out of $6,200. Materials are 79% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Killeen?
$5,500 to $11,000. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Killeen?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Killeen area (our national range of $40 to $150 scaled by the local price level).
+Is Killeen expensive for vinyl fence compared with the rest of Texas?
Killeen is 5% below the Texas statewide estimate ($6,500 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do carpenters earn in Killeen?
The BLS median is $22.87 an hour in the Killeen area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.30 to $28.43.
+What do basic and premium vinyl fence work cost in Killeen?
For 150 linear ft, basic work runs $4,150 to $5,800 and premium work $6,600 to $8,250. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Killeen?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Killeen?
$130 to $670, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Killeen
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.