Vinyl fence cost in Fargo, ND

Fargo weather and the vinyl fence calendar

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Fargo Hector Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Fargo are April through October: 7 of 12. Outside them, January, February, March, November and December have an average daytime high under 45°F.

In January, February, March, November and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Fargo gets about 24 inches of precipitation in a normal year, including roughly 51 inches of snow. The wettest months are May, June and July (4.3 inches in June). Inside the workable window, April and October are the driest, at 1.5 and 2.2 inches. The station averages about 11 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Fargo: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Fargo. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).

Is Fargo cheap or dear? The local comparison

Of the five closest metros, 2 are cheaper than Fargo. Sioux Falls is the lowest at about $6,450 (midpoint, 150 linear ft), 235 miles away.

Out of the 300 metros we cover, Fargo ranks #129 for the cost of this job (#1 is the most expensive). Statewide, Fargo is 0% above the North Dakota figure.

Elsewhere in North Dakota

Metros of a similar size

Big cities and small ones price differently, so here is Fargo against the 4 metros with the closest total employment.

Specs and site conditions that change a Fargo bid

• Permit

  Fence permits run $40-$150 depending on location.

• Type and height

  A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).

• Gates

  A vinyl gate costs $150-$780 installed, more for large or complex ones.

What local crews earn in Fargo

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fargo the blend is 1.01.

Carpenters (47-2031), 50% of the weighting: a median of $28.34 an hour, in line with the US median of $29.12. The middle half of them earn between $23.34 and $31.06 an hour. About 880 work in the metro. That is 59.2 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 50%) the local median is $23.72 an hour, which is 5% above the national $22.66. The middle half of them earn between $22.29 and $29.85 an hour. BLS counts 1,760 of them working in the area, 118.4 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $70 to the midpoint estimate; the 25th percentile takes off about $130. That is a swing of roughly 1.9% to 1.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Fargo has 148,660 jobs in total (BLS, May 2025), ranking 156th by size among the 300 metros on this site.

Optional extras in Fargo

Add-ons start from national price ranges and are scaled by 0.98 for Fargo, which is the average of the area's wage index (1.01) and goods price index (0.96). The estimator above can add them to your total.

Planning more than one job in Fargo?

Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Fargo wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−1%) and wood fence lowest (−2%); the gap comes from the trades each job uses.