Vinyl fence cost in Austin, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,200 – $8,450
- Per linear ft
- $28 – $55.50
- before permit
- Versus US midpoint
- −7%
- US $6,850
- Rank of 300 metros
- #254
- 1 = most expensive
If you want to install a vinyl fence in Austin, plan on $4,200 to $8,450 for 150 linear ft, all in. Per linear ft, that is $28 to $55.50 for materials and labor, with the permit on top. The local midpoint runs 7% lower than the national one. Building materials run about 6% below the US average here (BEA goods price index 93.8).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Austin, TX, standard level
$5,500 to $7,200
About $36 to $47 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,050 | $1,600 |
| Permits and fees | $70 | $110 |
| Total | $5,500 | $7,200 |
Cost breakdown for 150 linear ft in Austin, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,350 | 78% |
| Labor | $660 | $1,300 | $2,000 | 21% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,200 | $6,350 | $8,450 | 100% |
Where the Austin price comes from
Labor is 21% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Austin the blended ratio comes out at 0.88.
On the materials line, the BEA goods price index for the Austin metro is 93.8 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (98.1) and land at $40 to $150.
Add-ons priced for Austin
Extras are quoted nationally and then scaled to Austin by the average of the local wage index (0.88) and goods index (0.94), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $710 |
| Remove old fence | $1,350 – $2,750 |
Climate in Austin: timing your vinyl fence job
We use NOAA's 1991-2020 climate normals for Austin-Camp Mabry (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where exterior installation runs into the fewest weather problems in Austin (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Austin gets about 36 inches of precipitation in a normal year. The wettest months are May, June and October (5.0 inches in May). Inside the workable window, February and April are the driest, at 1.9 and 2.4 inches. The station averages about 123 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 42 | 2.6 | Workable |
| Feb | 67 | 46 | 1.9 | Workable |
| Mar | 73 | 52 | 2.9 | Workable |
| Apr | 80 | 59 | 2.4 | Workable |
| May | 87 | 67 | 5.0 | Workable |
| Jun | 93 | 73 | 3.7 | Hot |
| Jul | 97 | 75 | 2.0 | Hot |
| Aug | 98 | 75 | 2.7 | Hot |
| Sep | 91 | 70 | 3.5 | Hot |
| Oct | 83 | 61 | 3.9 | Workable |
| Nov | 72 | 51 | 2.9 | Workable |
| Dec | 64 | 43 | 2.7 | Workable |
How Austin compares
Same job, same size (150 linear ft), priced for the nearest metros. Houston is the priciest of the group at $6,650. College Station is the cheapest at $6,200.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Austin, TXthis page | $4,200 – $8,450 | $6,350 | |
| Killeen, TX65 miles | $4,150 – $8,250 | $6,200 | −2% |
| College Station, TX75 miles | $4,150 – $8,250 | $6,200 | −2% |
| San Antonio, TX80 miles | $4,150 – $8,300 | $6,250 | −1% |
| Waco, TX95 miles | $4,150 – $8,250 | $6,200 | −2% |
| Houston, TX140 miles | $4,450 – $8,850 | $6,650 | +5% |
| Texas (statewide) | $4,350 – $8,650 | $6,500 | +2% |
| United States | $4,550 – $9,150 | $6,850 | +8% |
Across 300 US metros, Austin comes in at #254 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Austin is 2% below the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $4,550 – $9,050 | $6,800 | +7% |
| Houston, TX | 3,289,720 jobs | $4,450 – $8,850 | $6,650 | +5% |
| San Antonio, TX | 1,126,880 jobs | $4,150 – $8,300 | $6,250 | −1% |
| El Paso, TX | 339,120 jobs | $4,100 – $8,100 | $6,100 | −4% |
| McAllen, TX | 296,700 jobs | $4,100 – $8,050 | $6,050 | −4% |
| Corpus Christi, TX | 192,580 jobs | $4,200 – $8,350 | $6,250 | −1% |
Cities with a workforce like Austin's
Big cities and small ones price differently, so here is Austin against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Louis, MO | 1,341,320 jobs | $4,750 – $9,750 | $7,250 | +14% |
| Portland, OR | 1,208,410 jobs | $4,900 – $9,900 | $7,400 | +17% |
| Baltimore, MD | 1,356,680 jobs | $4,650 – $9,350 | $7,000 | +10% |
| Las Vegas, NV | 1,136,960 jobs | $4,400 – $8,950 | $6,700 | +6% |
Austin: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Austin wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,200 to $5,900
4-ft picket or ranch rail
Standard
$5,500 to $7,200
6-ft privacy fence, standard white
Premium
$6,750 to $8,450
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,800 – $3,950 | $3,700 – $4,850 | $4,550 – $5,700 |
| 150 ft (150 linear ft) | $4,200 – $5,900 | $5,500 – $7,200 | $6,750 – $8,450 |
| 200 ft (200 linear ft) | $5,600 – $7,850 | $7,300 – $9,550 | $9,000 – $11,200 |
| full lot (300 linear ft) | $8,400 – $11,700 | $10,900 – $14,300 | $13,400 – $16,800 |
What nearby projects cost in Austin
Because every project leans on different trades, Austin's wage level does not move all prices equally. Against the US midpoint, aluminum fence runs −7% and wood fence −9%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,400 – $5,600 | −9% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
Vinyl fence: what moves the price in Austin
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Austin labor market for vinyl fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Austin is 0.88 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $24.16 an hour, which is 17% below the national $29.12. The middle half of them earn between $23.05 and $28.01 an hour. BLS counts 2,540 of them working in the area, 19.6 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $21.16 an hour, 7% below the US median of $22.66. The middle half of them earn between $18.34 and $23.12 an hour. About 11,140 work in the metro. That is 86.1 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.01 an hour) instead of the median, the labor line grows by about $100. At the 25th percentile ($23.05) it shrinks by about $30. The total moves by 1.6% or 0.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 1,293,690 jobs in the Austin-Round Rock-San Marcos area. That makes it the 24th largest of the 300 metros we cover, with 0.83% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $23.05 | $24.16 | $28.01 | $29.12 | 0.83 | metro |
| Construction laborers (47-2061) | 50% | $18.34 | $21.16 | $23.12 | $22.66 | 0.93 | metro |
| Blended | 100% | 0.88 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,500 to $7,200 for Austin, TX is attached.
Detailed vinyl fence report for Austin, TX, $9
The report lays out the vinyl fence numbers for Austin, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Austin: your questions
+How much does it cost to install a vinyl fence in Austin?
For 150 linear ft, expect $4,200 to $8,450 in the Austin area. A standard-spec job lands at $5,500 to $7,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Austin?
About $28 to $55.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Austin or Killeen?
Killeen is 65 miles away. The midpoint for 150 linear ft there is $6,200, which is 2% less than Austin ($6,350). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Austin?
About 21% at the midpoint, or $1,300 out of $6,350. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Austin?
$5,600 to $11,200. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Austin?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Austin area (our national range of $40 to $150 scaled by the local price level).
+Is Austin expensive for vinyl fence compared with the rest of Texas?
Austin is 2% below the Texas statewide estimate ($6,500 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do carpenters earn in Austin?
The BLS median is $24.16 an hour in the Austin area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.05 to $28.01.
+What do basic and premium vinyl fence work cost in Austin?
For 150 linear ft, basic work runs $4,200 to $5,900 and premium work $6,750 to $8,450. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Austin?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Austin?
$140 to $710, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Austin
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.