Vinyl fence cost in Omaha, NE
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,600
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #210
- 1 = most expensive
Local price for a vinyl fence in the Omaha area: $4,300 to $8,600 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 94.1).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Omaha, NE, standard level
$5,600 to $7,300
About $36.50 to $48 per linear ft before permits. Labor is about 22% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,150 | $1,700 |
| Permits and fees | $65 | $110 |
| Total | $5,600 | $7,300 |
Cost breakdown for 150 linear ft in Omaha, NE
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,550 | $4,950 | $6,350 | 77% |
| Labor | $710 | $1,400 | $2,150 | 22% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,300 | $6,450 | $8,600 | 100% |
Why Omaha prices look the way they do
Labor is 22% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Omaha the blended ratio comes out at 0.95.
Materials are scaled with BEA's regional price parity for goods. Omaha is at 94.1 against 100 for the US, so a materials line of $5,250 nationally becomes $4,950 here (midpoint, 150 linear ft). Permits follow the all-items index of 91.9: $35 to $140.
The best months for vinyl fence in Omaha
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Omaha Eppley Airfield (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Omaha are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Omaha gets about 32 inches of precipitation in a normal year, including roughly 27 inches of snow. The wettest months are May, June and August (4.7 inches in May). Inside the workable window, March and November are the driest, at 1.8 and 1.4 inches. The station averages about 33 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 34 | 15 | 0.8 | Cold |
| Feb | 39 | 19 | 0.9 | Cold |
| Mar | 52 | 30 | 1.8 | Workable |
| Apr | 64 | 41 | 3.2 | Workable |
| May | 75 | 53 | 4.7 | Workable |
| Jun | 84 | 63 | 4.4 | Workable |
| Jul | 88 | 68 | 3.5 | Workable |
| Aug | 86 | 66 | 4.6 | Workable |
| Sep | 79 | 56 | 3.0 | Workable |
| Oct | 66 | 43 | 2.3 | Workable |
| Nov | 50 | 30 | 1.4 | Workable |
| Dec | 38 | 20 | 1.2 | Cold |
Who does the work: Omaha trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Omaha the blend is 0.95.
Carpenters (47-2031), 50% of the weighting: a median of $25.39 an hour, 13% below the US median of $29.12. The middle half of them earn between $22.36 and $31.06 an hour. About 3,230 work in the metro. That is 64.8 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $23.22 an hour, which is in line with the national $22.66. The middle half of them earn between $20.00 and $27.58 an hour. BLS counts 3,990 of them working in the area, 80.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $150 to the midpoint estimate; the 25th percentile takes off about $80. That is a swing of roughly 1.2% to 2.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Omaha has 498,100 jobs in total (BLS, May 2025), ranking 51st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $22.36 | $25.39 | $31.06 | $29.12 | 0.87 | metro |
| Construction laborers (47-2061) | 50% | $20.00 | $23.22 | $27.58 | $22.66 | 1.02 | metro |
| Blended | 100% | 0.95 | |||||
Specs and site conditions that change a Omaha bid
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
How Omaha compares
Same job, same size (150 linear ft), priced for the nearest metros. Des Moines is the priciest of the group at $6,550. Topeka is the cheapest at $6,400.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Omaha, NEthis page | $4,300 – $8,600 | $6,450 | |
| Lincoln, NE55 miles | $4,250 – $8,550 | $6,400 | −1% |
| Sioux City, IA85 miles | $4,250 – $8,600 | $6,400 | level |
| Des Moines, IA120 miles | $4,350 – $8,800 | $6,550 | +2% |
| Topeka, KS155 miles | $4,250 – $8,550 | $6,400 | −1% |
| Sioux Falls, SD160 miles | $4,300 – $8,600 | $6,450 | level |
| Nebraska (statewide) | $4,250 – $8,550 | $6,400 | −1% |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Out of the 300 metros we cover, Omaha ranks #210 for the cost of this job (#1 is the most expensive). Statewide, Omaha is 1% above the Nebraska figure.
Elsewhere in Nebraska
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lincoln, NE | 182,620 jobs | $4,250 – $8,550 | $6,400 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Omaha against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $4,250 – $8,500 | $6,400 | −1% |
| Rochester, NY | 494,280 jobs | $4,550 – $9,150 | $6,850 | +6% |
| Buffalo, NY | 534,550 jobs | $4,550 – $9,250 | $6,900 | +7% |
| Fresno, CA | 476,890 jobs | $4,800 – $9,750 | $7,300 | +13% |
Pick a size, pick a tier: vinyl fence pricing in Omaha
The cited range is split into basic, standard and premium bands, then scaled to Omaha. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,600 to $7,300
6-ft privacy fence, standard white
Premium
$6,900 to $8,600
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,050 | $3,750 – $4,900 | $4,600 – $5,800 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,600 – $7,300 | $6,900 – $8,600 |
| 200 ft (200 linear ft) | $5,700 – $8,000 | $7,400 – $9,700 | $9,150 – $11,400 |
| full lot (300 linear ft) | $8,500 – $11,900 | $11,100 – $14,500 | $13,700 – $17,100 |
Optional extras in Omaha
Add-ons start from national price ranges and are scaled by 0.94 for Omaha, which is the average of the area's wage index (0.95) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $740 |
| Remove old fence | $1,400 – $2,850 |
Related projects, priced for Omaha
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Omaha wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−4%) and wood fence lowest (−6%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,850 – $7,150 | −6% |
| Chain-link fence | 150 linear ft | $1,450 – $5,850 | −5% |
| Aluminum fence | 150 linear ft | $3,650 – $11,000 | −4% |
| Concrete slab | 400 sq ft | $2,300 – $4,850 | −6% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,300 for Omaha, NE is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Omaha, NE line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Omaha: your questions
+How much does it cost to install a vinyl fence in Omaha?
For 150 linear ft, expect $4,300 to $8,600 in the Omaha area. A standard-spec job lands at $5,600 to $7,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Omaha?
About $28.50 to $56.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Omaha or Lincoln?
Lincoln is 55 miles away. The midpoint for 150 linear ft there is $6,400, which is 1% less than Omaha ($6,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Omaha?
About 22% at the midpoint, or $1,400 out of $6,450. Materials are 77% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Omaha?
$5,700 to $11,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Omaha?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Omaha area (our national range of $40 to $150 scaled by the local price level).
+Is Omaha expensive for vinyl fence compared with the rest of Nebraska?
Omaha is 1% above the Nebraska statewide estimate ($6,400 at the midpoint). We cover 2 metros in Nebraska; see the state page to compare them.
+What do carpenters earn in Omaha?
The BLS median is $25.39 an hour in the Omaha area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.36 to $31.06.
+What do basic and premium vinyl fence work cost in Omaha?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,900 to $8,600. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Omaha?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Omaha?
$140 to $740, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Omaha
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.